وصف

Yokogawa AIP830-111 Operation Keyboard

The Yokogawa AIP830-111, also cataloged as the AIP830 Operation Keyboard, operates as a dedicated hardware component for single-loop operator input execution within CENTUM VP Human Interface Station (HIS) environments. Configured for direct USB-based physical command entry and alarm acknowledgment, the Yokogawa AIP830-111 (AIP830 Operation Keyboard) provides deterministic operator interface signaling without intermediate protocol translation.

Suffix Breakdown & Model Matrix

• AIP830-111 Base Model: Operation Keyboard (single-loop operation interface)
• -1: Mode Selection Switch integrated
• 1: Operation Confirmation Key Type B
• 1: Standard factory configuration index

Hardware Specifications

Parameter	Specification
Model Brand	Yokogawa AIP830-111
Weight	Approx. 2.0 kg (without bracket), approx. 2.5 kg (with VESA bracket)
Dimensions	Not specified in source data
OperatingTemp	5 degC to 40 degC
PowerConsumption	Up to 1 A @ 5 VDC (USB bus powered)
Interface	Dual USB Type-A (host connection required)
Protocol	USB 2.0 (keyboard), USB 1.1 (audio)
Audio Output	Integrated USB speaker + buzzer

Process Control Interface Electrical Characteristics

The AIP830 series implements dual-channel USB signaling for simultaneous keyboard matrix scanning and independent audio event handling. In typical DCS configurations, operator confirmation keys and mode switches are mapped to discrete USB HID events without reliance on analog signal conditioning or 4-20 mA loop interpretation. Within Yokogawa process control ecosystems, operator stations may coexist with 4-20 mA HART loop protocol, FOUNDATION Fieldbus, and channel-to-channel isolated I/O architectures, although the AIP830 itself remains a direct digital interface device without fieldbus termination.

Frequently Asked Questions

Q: Does the AIP830-111 support hot-swappable USB reconnection during runtime?
A: The device operates as a USB HID peripheral. Reconnection behavior depends on host PC enumeration policy. No internal hot-swap controller is implemented.

Q: What is the maximum USB bus load under simultaneous audio and keyboard operation?
A: Total current draw is limited to 1 A at 5 VDC. Both USB channels must be connected directly to host ports.

Q: Can the keyboard operate with a single USB connection?
A: No. Both USB Type-A connectors are required for full keyboard and audio subsystem functionality.

Field Installation Guidelines

The AIP830-111 shall be installed on a stable operator console surface or VESA-compatible mounting interface. Both USB connectors must be routed directly to the host PC without intermediate hubs to avoid enumeration instability. Cable routing shall maintain separation from high-voltage switching lines and inverter output conductors to minimize electromagnetic coupling. Shield continuity shall be maintained to the host chassis ground reference. Mechanical installation shall ensure no torsional stress is applied to the connector housings during operation or maintenance cycles.

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية