وصف

Honeywell MU-KGPR02 Control Signal Interconnection Cable

The Honeywell MU-KGPR02-080, also cataloged as the MU-KGPR02 Control Signal Interconnection Cable, operates as a dedicated hardware component for signal transmission between process controllers and I/O termination assemblies within Honeywell TDC 3000 and Experion PKS systems.

Hardware Specifications

Parameter	Specification
Model	MU-KGPR02-080
Brand	Honeywell
Part Number	51109620-080
Product Type	Control Signal Interconnection Cable
Origin	USA
System Compatibility	Honeywell TDC 3000 and Experion PKS control platforms
Application	Controller, HPM, APM, I/O module, and termination assembly interconnection
Cable Function	Digital and analog signal interface between control system hardware assemblies
Shielding	Industrial shielded construction for EMI and RFI noise reduction
Connector Type	High-density industrial multi-pin connector assembly
Conductor Material	Industrial copper conductor design
Outer Jacket Material	Industrial PVC or LSZH insulation material
Operating Temp	Standard industrial cable operating range, typically 0 deg C to +70 deg C
Dimensions	Length defined by -080 suffix configuration; exact mechanical dimensions not specified
Power Consumption	Passive cable assembly; no external power consumption

4-20 mA HART and DCS Signal Interface Characteristics

The Honeywell MU-KGPR02 cable assembly supports physical signal routing between DCS hardware modules and field termination structures. Therefore, the cable maintains controlled electrical paths required for process I/O communication inside Honeywell control cabinets.

For Honeywell process control architectures, cable assemblies must preserve signal integrity for analog and digital I/O channels. Moreover, proper shielding and grounding practices help reduce electromagnetic interference that can affect 4-20 mA HART loop protocol signals, FOUNDATION Fieldbus / Profibus PA connectivity, and other process instrumentation interfaces.

The cable design supports cabinet-level separation requirements and maintains channel-to-channel isolation practices through correct wiring configuration. In addition, installation quality directly affects signal stability, grounding performance, and maintenance accessibility.

Frequently Asked Questions

Q: Does the MU-KGPR02-080 cable require an external power supply?
A: No. The MU-KGPR02-080 is a passive interconnection cable and does not consume external electrical power.

Q: Can the MU-KGPR02-080 be installed without shield grounding?
A: The cable shield should follow the control cabinet grounding specification. Incorrect shield termination can increase susceptibility to electrical noise.

Q: Is the -080 suffix a replaceable cable length identifier?
A: The -080 suffix identifies the specific cable configuration. The exact mechanical length should be verified against the original system documentation before installation.

Field Installation Guidelines

• Verify the MU-KGPR02-080 part number before connecting the cable to controller, I/O, or termination assemblies.
• Route the cable according to cabinet wiring separation rules and avoid parallel installation with high-voltage power conductors.
• Connect cable shields according to Honeywell cabinet grounding practices to maintain electromagnetic compatibility.
• Check connector locking mechanisms before system startup to prevent intermittent signal interruption.
• Maintain proper cable bending radius and avoid mechanical stress at connector interfaces.
• Confirm I/O channel assignment and termination mapping before applying system power.

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية