وصف

GE DS200TCCBG1BED Common Extended Analog I/O Board

The GE DS200TCCBG1BED, also cataloged as the DS200TCCB Common Extended Analog I/O Board, operates as a dedicated hardware component for analog signal acquisition and conversion within the GE Speedtronic Mark V turbine control system. The board processes RTD, thermocouple, transmitter, and voltage input signals through integrated A/D conversion and analog output channels.

Hardware Specifications

Parameter	Specification
Model	DS200TCCBG1BED
Brand	GE
Origin	USA
Weight	2.00 lbs
Dimensions	230 x 170 x 30 mm
Operating Temp	0 deg C to +50 deg C typical; extended tolerance -30 deg C to +65 deg C
Power Consumption	Approx. 8 W
Board Type	Common Extended Analog I/O Board
Functional Acronym	TCCB
System Platform	GE Speedtronic Mark V Turbine Control System
Analog Inputs	8 differential channels
Supported Inputs	RTD, thermocouple, 4-20 mA, +/-10 V
Analog Outputs	4 channels, 0-10 V or 4-20 mA
Input Resolution	12-bit A/D conversion
Output Resolution	12-bit DAC conversion
Input Accuracy	+/-0.05% FS
Output Accuracy	+/-0.1% FS
Sampling Rate	Approx. 200 Hz per channel
Isolation Voltage	1500 V field-to-logic
Power Supply	24 VDC +/-10% and +5 VDC logic rail
Connectors	JCC/JDD RTD inputs, JEE auxiliary, 3PL I/O engine interface
Processor	Intel 80196 microcontroller
Firmware Storage	Socketed EPROMs
PCB Protection	Normal coating
PCB Layers	6-layer noise-hardened design

I/O Density Scaling and Analog Processing

The DS200TCCBG1BED extends the analog processing capacity of the GE Mark V platform through additional RTD, thermocouple, current, and voltage measurement channels. The onboard signal conditioning circuitry performs local conversion of field analog signals before transferring processed data through the control architecture.

The board uses GE industrial control I/O density scaling methods to increase sensor channel availability while maintaining compatibility with Mark V control racks. The onboard Intel 80196 microcontroller manages local scanning, conversion handling, and diagnostic processing.

Frequently Asked Questions

Q: What types of field signals can be connected to the DS200TCCBG1BED analog inputs?
A: The board supports differential analog inputs for RTD, thermocouple, 4-20 mA transmitter signals, and +/-10 V voltage inputs.

Q: Does the DS200TCCBG1BED provide isolation between field wiring and control electronics?
A: Yes. The board provides 1500 V field-to-logic isolation for separation between external analog signals and internal control circuits.

Q: Is firmware stored directly on the board hardware?
A: Yes. The board uses socketed EPROM devices for firmware storage and calibration data management.

Field Installation Guidelines

Install the DS200TCCBG1BED in the designated GE Speedtronic Mark V rack location and verify connector identification before applying power. Confirm that JCC, JDD, JEE, and 3PL connections match the approved wiring documentation.

Analog signal cables should be routed separately from high-voltage and high-current conductors to reduce electromagnetic interference. Shielded instrumentation cables should be used where required, with cable shields terminated according to the control cabinet grounding design.

After installation, verify field input polarity, RTD and thermocouple wiring configuration, and analog channel assignments. Perform the required calibration procedure using the onboard reference points before returning the turbine control system to service.

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية