وصف

Yokogawa AFS30D Duplexed Field Control Unit

The Yokogawa AFS30D, also cataloged as the AFS30D Duplexed Field Control Unit, operates as a dedicated hardware component for executing process I/O control across CENTUM CS 3000 platforms.

Hardware Specifications

Parameter	Specification
ModelBrand	Yokogawa
Origin	Japan
Weight	19 kg
Dimensions	Standard 19-inch rack
OperatingTemp	0 to 55 degC
Processor	VR5432, 133 MHz
MainMemory	16 Mbyte
MemoryProtection	Battery backup, 72-hour retention, 48-hour recharge minimum
CommunicationInterfaces	Dual-redundant Vnet, Dual-redundant FIO via ESB/ER bus
NodeCapacity	Up to 8 nodes
PowerSupply	100-120 VAC 50/60 Hz, 220-240 VAC 50/60 Hz, 24 VDC
PowerConsumption	250 VA (100-120 VAC), 400 VA (220-240 VAC), 4.5 A (24 VDC)
FCUStatusOutput	2 terminals (NC, C), 30 V DC max, 0.3 A
Installation	Rack-mounted, 19-inch

Process Control Specific Features

• Supports 4-20 mA HART loop protocol integration for analog input/output modules.
• Channel-to-channel isolation minimizes interference between parallel I/O operations.
• Cold junction compensation (CJC) supported for precise thermocouple measurements.
• Sequence of Events (SOE) data transfer to centralized SOE servers with timestamp accuracy.

Frequently Asked Questions

Q: VnA: Can the AFS30D memory be replaced or expanded while powered?
A: Memory is battery-backed and not designed for hot-swap replacement; maintenance requires controlled power-down procedures.

Q: VnA: What is the expected switchover time in duplexed operation?
A: The backup processor takes control seamlessly within milliseconds; precise timing depends on configured process routines.

Q: VnA: Are firmware upgrades supported via network interfaces?
A: Yes, firmware updates are executed via redundant Vnet or FIO buses following manufacturer-approved procedures.

Field Installation Guidelines

• Mount unit in standard 19-inch rack; secure using rack screws and rails.
• Ensure Vnet and FIO cables are segregated from high-voltage power lines to reduce EMI.
• Proper grounding of chassis is required; connect grounding points to plant common earth.
• Maintain minimum clearance of 50 mm around airflow vents for adequate cooling.
• Connect FCU status contacts to monitoring relay circuits following 30 V DC, 0.3 A limitations.

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية