وصف

Yokogawa SAV144-S63 Digital Input Module

The Yokogawa SAV144-S63 also cataloged as the SAV144 Digital Input Module, operates as a dedicated hardware component for acquisition of no-voltage contact signals within CENTUM CS and CENTUM VP control system architectures. The module converts 16-channel discrete field contact states into system-recognizable digital input data via isolated internal scanning circuitry.

Suffix Breakdown & Model Matrix

• SAV144: Base module family identifier for digital input processing
• S63: Hardware configuration variant defining channel grouping and termination style within CENTUM I/O architecture

Hardware Specifications

Parameter	Specification
ModelBrand	Yokogawa SAV144-S63
Origin	Japan
Weight	Approx. 0.41 kg
Dimensions	2.5 cm x 12.7 cm x 12.7 cm
OperatingTemp	-20 degC to +70 degC
PowerConsumption	5 VDC: 290 mA max, 24 VDC: 140 mA max
Input Channels	16 isolated channels
Input Type	No-voltage contact input
Input Current	6 mA ±20 percent (external 24 VDC supply)
Max Input Voltage	30 VDC instantaneous
ON Resistance	<= 1 kOhm
OFF Resistance	>= 100 kOhm
Response Time	<= 40 ms
Withstand Voltage	2 kVAC for 1 minute (input to system)

Channel-to-Channel Isolation Architecture (CENTUM I/O Behavior)

The SAV144-S63 implements isolated input scanning per channel group within Yokogawa CENTUM VP I/O backplane architecture. Each input channel is electrically separated to reduce cross-coupling effects between field wiring loops and internal logic sampling circuits. The backplane communication layer performs cyclic polling with deterministic scan timing, ensuring consistent state acquisition across all 16 digital input points under mixed load switching conditions.

Frequently Asked Questions

Q: Does the SAV144-S63 support hot-swap replacement under powered backplane conditions?
A: Module replacement is typically constrained by system configuration. Backplane power integrity and rack-specific I/O redundancy design determine whether removal under power is permitted.

Q: What is the functional impact of ON/OFF resistance thresholds in field contact monitoring?
A: The ON resistance threshold (<= 1 kOhm) defines valid contact closure detection, while OFF resistance (>= 100 kOhm) ensures leakage immunity during open-contact state evaluation.

Q: How is channel isolation maintained during simultaneous input switching?
A: Isolation is enforced via internal channel separation and backplane sampling segmentation, preventing transient coupling during concurrent state transitions.

Field Installation Guidelines

• Maintain separation between signal cables and power conductors to minimize induced noise on dry contact loops
• Ensure proper termination using specified MIL cable or pressure clamp terminals to avoid contact resistance drift
• Verify external 24 VDC supply stability within specified tolerance before energizing input loops
• Ground shielded cable at a single-point earth reference to prevent ground loop currents across I/O racks
• Avoid exceeding 30 VDC instantaneous input conditions on any channel to prevent input stage stress

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية