وصف

Honeywell CC-PAIH02 C300 HART Analog Input Module

The Honeywell CC-PAIH02, also cataloged as the CC-PAIH02 HART Analog Input Module, operates as a dedicated hardware component for acquisition of 4-20 mA and voltage-based process signals within the Honeywell Experion PKS C300 I/O architecture. The module digitizes up to 16 field input channels while maintaining concurrent HART digital communication over the same loop interface for bidirectional parameter access and diagnostics.

Suffix Breakdown & Model Matrix

The model designation CC-PAIH02 does not contain documented functional suffix segmentation beyond its base catalog identifier. No verified manufacturer-published sub-variant decoding is available for this part number.

Hardware Specifications

Parameter	Specification
Model	CC-PAIH02
Brand	Honeywell
Origin	USA
Weight	0.3kg
Dimensions	Not specified
Operating Temp	0 deg C to 60 deg C
Power Consumption	Approx. 60 W
Module Type	HART Analog Input Module
Channel Count	16 channels
Input Types	4-20 mA, 1-5 V, 0-5 V
Signal Mode	Single-ended / differential configuration support
HART Protocol	Supported on field loops

Honeywell 4-20 mA HART Loop Integration Characteristics

Within the Honeywell Series C I/O system, the CC-PAIH02 operates on a multiplexed analog-digital loop structure where 4-20 mA process current is sampled concurrently with HART FSK modulation signals. The module performs channel-level signal conditioning and digitization prior to backplane transmission toward the C300 controller. Channel-to-channel electrical separation is implemented at the I/O termination assembly level to reduce cross-channel coupling during mixed-signal acquisition. HART communication frames are passed transparently to higher-level asset management layers without interrupting analog conversion cycles.

Frequently Asked Questions (FAQ)

Q: Does the CC-PAIH02 support hot-swap replacement under energized conditions?
A: The module is designed for removal and insertion at the Series C I/O level; however, safe replacement requires adherence to system-defined hot-swap procedures to maintain backplane integrity and avoid loop disturbance.

Q: How is HART data handled during continuous analog sampling?
A: HART FSK signals are demodulated in parallel with 4-20 mA acquisition, allowing simultaneous analog conversion and digital field device communication without loop interruption.

Q: What is the backplane power dependency of the module?
A: The module draws operational power from the Series C backplane supply; load distribution is managed at the I/O chassis level and must remain within controller power budget limits.

Field Installation Guidelines

The CC-PAIH02 shall be installed on a compatible Honeywell Series C I/O termination assembly with verified grounding continuity between chassis earth and field cable shields. Shield termination should be performed at a single-point ground reference to prevent circulating currents across analog input loops. Field wiring for 4-20 mA channels must maintain loop resistance within transmitter compliance limits to ensure proper current regulation. Signal cables carrying HART communication should be routed separately from high-voltage switching conductors to minimize induced noise coupling. All module insertion and removal actions shall follow system-defined maintenance isolation procedures to avoid transient backplane disturbance.

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية