وصف

ABB SPS03-15V 2VAA008281R001 Power Supply

Configured for DC voltage conversion and isolated power delivery in ABB industrial control platforms, the ABB SPS03-15V 2VAA008281R001 (SPS03-15V Power Supply) provides direct electrical power conditioning for connected automation hardware.

Hardware Specifications

Parameter	Specification
Model	SPS03-15V 2VAA008281R001
Brand	ABB
Product Type	Power Supply
Origin	Sweden
Weight	0.7 kg
Dimensions	4.5 x 14.5 x 17.3 cm
Operating Temp	-25 deg C to +60 deg C
Storage Temp	-40 deg C to +85 deg C
Humidity	5-95% RH, non-condensing
Input Voltage	85-264 VAC / 100-300 VDC
Input Current	0.15 A at 115 VAC
Frequency Range	47-63 Hz
Output Voltage	15 VDC
Output Power	5 W
Efficiency	>=80% typical
Inrush Current	<10 A
Isolation Voltage	3 kVAC

Industrial Control Power Conversion Characteristics

The SPS03-15V 2VAA008281R001 receives wide-range AC and DC input sources and converts them into regulated 15 VDC output power for control system components. Therefore, the module supports flexible installation conditions where different supply networks are present.

ABB industrial power supply modules integrate with automation systems through defined electrical interfaces. Additionally, ABB control hardware platforms apply backplane bus communication velocity management, Profinet and EtherNet/IP deterministic network principles, and firmware flash compatibility requirements across supported control architectures.

The module provides electrical isolation between input and output circuits with a 3 kVAC isolation rating. Furthermore, the power design limits transient effects through controlled inrush current characteristics.

Frequently Asked Questions

Q: What input voltage range does the ABB SPS03-15V 2VAA008281R001 support?
A: The power supply accepts 85-264 VAC input and 100-300 VDC input sources with a frequency range of 47-63 Hz.

Q: What output parameters does the SPS03-15V provide?
A: The module provides a 15 VDC output with a 5 W power rating and typical efficiency of 80% or higher.

Q: What environmental conditions are specified for operation?
A: The module operates from -25 deg C to +60 deg C and supports 5-95% RH non-condensing humidity conditions.

Field Installation Guidelines

• Install the SPS03-15V module inside an enclosure that provides mechanical protection and appropriate ventilation.
• Verify that the AC or DC input wiring matches the specified voltage range before energizing the unit.
• Separate power wiring from sensitive signal cables to reduce electrical interference.
• Connect protective grounding according to the control cabinet grounding design.
• Maintain proper cable routing and avoid placing high-current conductors near low-level measurement circuits.
• Inspect terminal connections periodically to prevent loose wiring and increased contact resistance.
• Confirm output voltage levels before connecting downstream control devices.

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية