46000-01 | Vibration Transducer Interfaces | Bently Nevada

ماركةBently Nevada
يشارك

46000-01 | Vibration Transducer Interfaces | Bently Nevada

ماركةBently Nevada
يشارك

شكل المنتج

Bently Nevada 46920-01 High-Performance Vibration Transducer Interface The Bently Nevada 46920-01, also cataloged as the 46920 vibration interface module, operates... اقرأ المزيد

رمز المنتج: 46920-01
بلد المنشأ: USA

100% أصلي وحقيقي

هل تحتاج إلى مخزون كبير؟ تواصل معنا .

100% جديد تمامًا وجاهز للشحن

هل تحتاج إلى مخزون كبير؟ تواصل معنا .

دعم استرداد الأموال، خدمة 7X24 ساعة

دعم استرداد الأموال، خدمة 7X24 ساعة، اتصل بنا .

اتصل بنا: +86 135 995 07613

متاح في أيام العمل من الساعة 9:00 صباحًا إلى 6:00 مساءً

راسلنا عبر البريد الإلكتروني: sales2@industriaxplc.com

متاح 24/7 للاستفسارات والدعم

وصف

Bently Nevada 46920-01 High-Performance Vibration Transducer Interface

The Bently Nevada 46920-01, also cataloged as the 46920 vibration interface module, operates as a dedicated hardware component for dynamic vibration signal conditioning and transmission within Bently Nevada 3500 Series machinery protection systems.

Hardware Specifications

Parameter	Specification
Model	46920-01
Brand	Bently Nevada
Origin	USA
Weight	0.45 kg
Dimensions	120 mm x 60 mm x 35 mm
Operating Temp	-40 deg C to +100 deg C
Power Consumption	1.2 W @ 24 VDC
Supply Voltage	10 to 30 VDC
Response Time	~10 us
Accuracy	±0.5 % of full scale
Enclosure Rating	IP67
Circuit Protection	Short-circuit and reverse-polarity protection

Eddy-Current Probe Scaling and Gap Voltage Validation

The 46920-01 supports eddy-current probe scaling for direct integration with Bently Nevada proximity probes. Gap voltage validation aligns to -10 VDC target levels, ensuring correct probe standoff and linear measurement range. Cross-talk suppression circuitry minimizes interference between adjacent transducer channels, maintaining signal fidelity in rotor dynamics monitoring applications.

Frequently Asked Questions

Q: Does the 46920-01 support hot-swap installation in live 3500 racks?

A: No. Power must be removed from the rack before installing or removing the module to avoid damage to backplane contacts and internal circuitry.

Q: What is the recommended cable shielding practice for this interface?

A: Shielded twisted-pair cables should be used, with the shield grounded at one end only—preferably at the 3500 rack ground bus—to prevent ground loops.

Q: Is firmware upgrade possible in the field?

A: Firmware is factory-set; no field upgrade procedure is supported for this model.

Field Installation Guidelines

Mount the module in a vibration-isolated section of the 3500 rack. Ensure all connector retention screws are torqued to specification. Maintain separation between signal wiring and high-power cables to reduce electromagnetic coupling. Verify gap voltage prior to energizing the system to confirm proper probe positioning.