وصف

Bently Nevada 330930-060-00-05 3300 NSv Extension Cable

The Bently Nevada 330930-060-00-05, also cataloged as the 330930 3300 NSv Extension Cable, operates as a dedicated hardware component for signal transmission between a 3300 NSv proximity probe and monitoring system interface.

Hardware Specifications

Parameter	Specification
Model	330930-060-00-05
Brand	Bently Nevada
Product Type	3300 NSv Extension Cable
Origin	USA
Weight	0.18 kg
Dimensions	20.5 x 22.2 x 3.3 cm (estimated shipping size)
Operating Temp	Not specified
Power Consumption	Passive cable assembly, no external power consumption
Cable Length	6.0 meters (19.7 feet)
Connector Protector and Cable Option	Without stainless steel armor
Agency Approval Option	Multiple Approvals
Recommended Gap Setting	1.27 mm (50 mils)
Extension Cable Capacitance	69.9 pF/m (21.3 pF/ft) typical
Tariff Code	8537101190
Shipment Location	Xiamen, China

Eddy-Current Signal Transmission and Rotor Dynamics Interface

The 3300 NSv extension cable maintains electrical continuity between the proximity probe and the monitoring electronics. Therefore, it supports accurate eddy-current probe scaling by preserving the probe system impedance characteristics and signal response.

The cable assembly operates with the recommended 1.27 mm (50 mils) gap setting used for 3300 NSv proximity measurement systems. Additionally, the specified cable capacitance of 69.9 pF/m helps maintain the calibrated electrical behavior required for shaft displacement and vibration measurement.

For rotor dynamics monitoring applications, the cable routing directly affects measurement stability. Installers should minimize mechanical stress, avoid sharp bends, and maintain separation from high-current conductors to reduce possible signal interference.

Frequently Asked Questions

Q: What is the primary function of the Bently Nevada 330930-060-00-05 cable?
A: The cable extends the connection between a 3300 NSv proximity probe and the associated monitoring electronics while maintaining the specified electrical characteristics.

Q: Does the 330930-060-00-05 include stainless steel armor protection?
A: No. This configuration uses a cable design without stainless steel armor.

Q: What gap setting does this extension cable configuration support?
A: The recommended probe gap setting is 1.27 mm (50 mils) for compatible 3300 NSv proximity transducer systems.

Field Installation Guidelines

• Install the cable according to the approved 3300 NSv transducer system wiring arrangement.
• Maintain proper cable routing distance from power cables, motor leads, and high-frequency switching sources.
• Avoid excessive bending, twisting, or pulling force during installation.
• Verify connector condition before installation and keep connection points free from contamination.
• Confirm the probe gap voltage and mechanical positioning after completing installation.
• Use appropriate shielding and grounding practices according to the monitoring system installation requirements.

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية