وصف

Schneider Electric 140NOC77100 Modicon Quantum Ethernet/IP Network Module

Configured for deterministic industrial Ethernet/IP communication in Modicon Quantum automation platform,the Schneider Electric 140NOC77100 (140NOC77100 Ethernet/IP network module) provides direct physical/electrical execution for CIP explicit messaging and I/O cyclic data exchange across Quantum backplane architecture.

The module operates as a dual-port RJ45 10/100 Mbit/s communication interface integrating Ethernet/IP stack services including SNMP agent, DHCP/BootP server capability, and multicast implicit messaging handling up to 128 connections. It is powered directly from rack backplane supply and implements status diagnostics via multi-LED front panel indication.

Suffix Breakdown & Model Matrix

140 NOC 771 00 is a fixed-order Quantum Ethernet/IP communication module identifier. No documented functional suffix segmentation is defined by manufacturer for feature branching within this code.

Hardware Specifications

Parameter	Specification
ModelBrand	Schneider Electric 140NOC77100
Origin	France
Weight	0.345 kg
Dimensions	Not specified
OperatingTemp	0 degC to 60 degC
PowerConsumption	500 mA at 5 V DC
Communication Protocol	EtherNet/IP (CIP Explicit / Implicit Messaging)
Transmission Rate	10/100 Mbit/s
Network Connections	Up to 128
Interface	RJ45 10BASE-T / 100BASE-TX

PLC Network Deterministic Backplane Integration Characteristics

The module interfaces with Quantum backplane bus where Ethernet/IP cyclic traffic scheduling is synchronized with CPU scan execution. Firmware-level stack handling supports deterministic implicit messaging while explicit CIP commands are processed via asynchronous buffer queues. Backplane power and data coupling ensures module registration during rack initialization sequence without external addressing dependency. Ethernet frame handling is optimized for industrial real-time segmentation and collision monitoring via duplex state indication.

Frequently Asked Questions

Q: Does the module support hot swap replacement during rack operation?
A: Hot swap capability depends on Quantum rack configuration; electrical backplane disconnection may interrupt active CIP connections and requires controller-supported module reintegration.

Q: What is the maximum backplane load impact of the module?
A: The module draws 500 mA at 5 V DC from rack supply; total backplane loading must remain within Quantum chassis power budget.

Q: Can firmware be updated via Ethernet interface?
A: Firmware upgrade is supported through Schneider Quantum configuration tools via Ethernet/IP service channels depending on CPU firmware compatibility.

Field Installation Guidelines

Ensure rack power is isolated before module insertion into Quantum backplane slot. Maintain RJ45 cabling separation from high-voltage conductors to minimize EMI coupling on 10/100 BASE-TX lines. Use shielded twisted pair cables with proper grounding at cabinet entry point. Verify link and network status LEDs during initialization sequence. Avoid bending radius violations on Ethernet cables below standard industrial minimum. Confirm IP addressing consistency when DHCP/BootP services are enabled to prevent network duplication conflicts.

تحديد

• rtl">
  

المزايا

• موثوقية عالية في البيئات الصناعية
  
  

• يدعم التشغيل المستمر، متوافق مع أنظمة PLC/DCS الرئيسية