تقدم سلسلة CompactLogix 1769 حلول PLC مدمجة وقابلة للتعديل. صُممت هذه الأنظمة لتوفير تحكم واتصالات موثوقة، وهي مثالية لتطبيقات الأتمتة الصناعية متوسطة الحجم، حيث تدعم تكامل الإدخال/الإخراج والاتصال الشبكي.
سلسلة ألين برادلي 1769 (كومباكت لوجيكس)
-
Allen Bradley Allen-Bradley 1769-ASCII CompactLogix ASCII Communication Module
Allen-Bradley 1769-ASCII CompactLogix ASCII Communication Module The Allen-Bradley 1769-ASCII, also cataloged as the 1769-ASCII ASCII Communication Module, operates as a dedicated hardware component for ASCII data exchange within CompactLogix and MicroLogix 1500 controller platforms. The module provides two configurable serial ports for RS-232, RS-422, and RS-485 communication. Hardware Specifications Parameter Specification Model 1769-ASCII Brand Allen-Bradley Origin United States Product Type Specialty Communication Module Product Line CompactLogix Module Type ASCII Communication Interface Module Weight 0.13 lbs (0.06 kg) Dimensions Not specified by manufacturer Operating Temp 0 to 62 deg C (32 to 140 deg F) Power Consumption 33.6 Watts Mounting DIN Rail or Panel Mount Chassis Installation Series A and B Communication Ports Two serial ports Serial Interfaces RS-232, RS-422, RS-485 Port Configuration Individually configured ASCII communication channels Handshaking RTS/CTS hardware handshaking enabled Input Words 108 Configuration Words 31 Isolation Voltage 30 Volts continuous Power Rating 425 mA at 5 VDC Backplane Current 1.4 A at 24 V Power Dissipation, Max 2.13 Watts Thermal Dissipation 7.3 BTU/hr Serial Input Voltage Signal 3 to 25 VDC for active low state; -3 to -25 VDC for inactive high state Recommended Cable Belden 8761 shielded cable Serial Port Status Monitoring TX FIFO overflow, RX FIFO overflow, RX parity error, handshake error, new data flag Transaction ID Range 0 to 255 UNSPSC 32151705 EtherNet/IP and CompactLogix Backplane Integration The 1769-ASCII module operates as a CompactLogix expansion component through the 1769 backplane interface. Therefore, the controller exchanges configuration, status, and ASCII data through the local I/O architecture. The module supports I/O density scaling by adding dedicated serial communication channels without occupying controller communication ports. Furthermore, the module maintains compatibility with CompactLogix and MicroLogix 1500 controllers. The system configuration defines communication parameters, message handling, and serial transaction processing through the controller programming environment. Frequently Asked Questions Q: How many serial communication channels does the 1769-ASCII provide?A: The module provides two independent serial ports. Each port can be configured separately for ASCII communication using RS-232, RS-422, or RS-485 electrical interfaces. Q: Does the module support hardware handshaking?A: Yes. The 1769-ASCII supports RTS/CTS hardware handshaking for serial communication control. Q: What cable type does the manufacturer recommend for installation?A: The recommended cable type is Belden 8761 shielded cable. The shield should follow standard industrial grounding practices to reduce electrical noise coupling. Field Installation Guidelines Install the 1769-ASCII module on the CompactLogix 1769 chassis according to the controller system layout requirements. Verify that the module remains within the rated power supply distance specification before completing the installation. Use shielded serial cables for all field connections. Route communication wiring separately from high-voltage power conductors and motor cables to reduce electromagnetic interference. Connect the cable shield according to the plant grounding standard. Avoid creating unnecessary ground loops while maintaining effective noise suppression. Before commissioning, verify RS-232, RS-422, or RS-485 wiring polarity, communication parameters, and controller configuration settings. Confirm TX and RX status indicators during initial communication testing.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-L24ER-QBFC1B CompactLogix Controller
Allen-Bradley 1769-L24ER-QBFC1B CompactLogix Controller Configured for controller task execution and EtherNet/IP communication in CompactLogix systems, the Allen-Bradley 1769-L24ER-QBFC1B (1769-L24ER Controller) provides programmable control, local I/O expansion, and Ethernet network connectivity. The controller supports 32 tasks, with up to 1000 programs per task, and provides 768 KB of onboard user memory. Hardware Specifications Parameter Specification Model 1769-L24ER-QBFC1B Brand Allen-Bradley Product Line CompactLogix Product Type Controller Base Model 1769-L24ER UPC 885630101255 Origin Not specified in supplied data Weight 2.06 lb (0.94 kg) Onboard User Memory 768 KB Maximum Number of Tasks 32 Programs per Task 1000 Internal Energy Storage Supported Battery Not required Ethernet Network Supported DLR Topology Supported Linear Topology Supported Traditional Star Topology Supported Local I/O Expansion Up to 4 Compact I/O modules Maximum Ethernet Nodes 8 Controller Connections 256 EtherNet/IP Communication and I/O Scaling The 1769-L24ER-QBFC1B supports EtherNet/IP-based controller communication and multiple Ethernet network topologies. The controller supports DLR, linear, and traditional star configurations, allowing network architecture to match the physical installation. Furthermore, the controller provides up to 256 controller connections and supports a maximum of 8 Ethernet nodes according to the supplied specifications. Local I/O expansion supports up to 4 Compact I/O modules, allowing the control system to scale without changing the controller platform. The 768 KB onboard user memory stores the application and controller data required for programmed task execution. The controller supports 32 tasks, while each task can contain up to 1000 programs. Frequently Asked Questions (FAQ) Q: Does the 1769-L24ER-QBFC1B require a battery? A: No. The supplied specifications identify the controller as not requiring a battery and indicate internal energy storage support. Q: How many tasks can the controller execute? A: The controller supports a maximum of 32 tasks, with up to 1000 programs assigned to each task. Q: What Ethernet network topologies does the controller support? A: The controller supports DLR, linear, and traditional star topologies. Field Installation Guidelines Install the controller within the CompactLogix system according to the applicable Rockwell Automation installation documentation. Confirm the available panel space before installation because the supplied dimensional data does not specify enclosure or mounting dimensions. Maintain physical separation between Ethernet communication wiring and high-voltage or high-noise power conductors where practical. Route communication cables to minimize exposure to motor, contactor, transformer, and other high-noise circuits. Use the specified EtherNet/IP network topology consistently with the network design. Verify all local I/O module connections before applying system power. Confirm controller connection requirements against the configured Ethernet node count. Inspect grounding and bonding arrangements according to the applicable electrical installation standard and system documentation. Do not apply field wiring or power until terminal assignments and module compatibility have been verified. Verify firmware compatibility between the controller, connected Compact I/O modules, and programming environment before commissioning.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-L23-QBFC1B CompactLogix Packaged Controller
Allen-Bradley 1769-L23-QBFC1B CompactLogix Packaged Controller Configured for discrete and analog signal execution in CompactLogix controller platforms, the Allen-Bradley 1769-L23-QBFC1B (1769-L23-QBFC1B CompactLogix Packaged Controller) provides direct physical and electrical control functions through embedded I/O, RS-232 communication, and high-speed counter channels. Hardware Specifications Parameter Specification Model 1769-L23-QBFC1B Brand Allen-Bradley Origin USA Product Type CompactLogix Packaged Controller Product Line CompactLogix Module Type Processor Module Weight 3.75 lbs (1.70 kg) Operating Temp 0 to 60 deg C (32 to 140 deg F) Storage Temp -40 to 85 deg C (-40 to 185 deg F) Power Consumption Not specified in provided data User Memory 512 KB Communication Ports Two RS-232 ports Communication Protocols Port 1: DF1 / ASCII / DH485; Port 2: DF1 / DH485 Embedded Digital Inputs Sixteen 24 VDC inputs Embedded Digital Outputs Sixteen 24 VDC outputs Analog Input Channels Four differential or single-ended channels Analog Input Range 0-10.5 VDC / 4-20 mA Analog Output Channels Two single-ended channels Analog Output Range 0-10.5 VDC / 0-21 mA High-Speed Counter Inputs Four HSC inputs Enclosure Type Open-type Mounting Method DIN rail or panel mounting Vibration Rating 5 g at 10 to 500 Hz Operating Shock 30 g Series A and B Replacement Terminal Block 1769-RTBN18 Wire Type Copper, 90 deg C Solid Wire Size 22-14 AWG Stranded Wire Size 22-16 AWG UPC 612598350742 EtherNet/IP and CompactLogix Control Architecture The 1769-L23-QBFC1B integrates processor functions with embedded I/O resources inside a CompactLogix packaged controller design. Therefore, the controller reduces external module requirements for compact machine control applications. The controller supports CompactLogix backplane communication methods and provides integrated I/O density scaling through sixteen 24 VDC digital inputs, sixteen 24 VDC digital outputs, analog channels, and high-speed counter inputs. In addition, the two RS-232 communication ports support DF1, ASCII, and DH485 serial communication protocols. The hardware supports firmware-based CompactLogix system operation and maintains compatibility with controller configuration tools designed for the 1769 platform. Frequently Asked Questions Q: Does the 1769-L23-QBFC1B support Ethernet communication directly?A: No. The provided specifications list two RS-232 communication ports. Ethernet communication requires additional hardware or a compatible system architecture. Q: What analog signal types can the controller process?A: The controller accepts four analog input channels configured for 0-10.5 VDC or 4-20 mA signals and provides two analog output channels configured for 0-10.5 VDC or 0-21 mA signals. Q: Can the controller operate with DIN rail and panel installation methods?A: Yes. The 1769-L23-QBFC1B supports both DIN rail mounting and panel mounting configurations. Field Installation Guidelines Install the 1769-L23-QBFC1B on a stable DIN rail or panel surface according to the CompactLogix installation requirements. Maintain separation between analog signal wiring and high-voltage power conductors to reduce electrical interference. Use appropriate shield grounding practices for analog circuits, and connect cable shields according to the control cabinet grounding design. Verify terminal block wiring before applying power. Confirm that 24 VDC input and output circuits match the configured I/O assignment. Ensure RS-232 communication cables follow recommended industrial routing practices to avoid signal disruption. Provide adequate cabinet ventilation to maintain the specified operating temperature range. Before system startup, verify controller firmware compatibility and I/O configuration parameters within the programming environment.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-IR6 CompactLogix RTD Analog Input Module
Allen-Bradley 1769-IR6 CompactLogix RTD Analog Input Module The Allen-Bradley 1769-IR6, also cataloged as the 1769-IR6 Analog Input Module, operates as a dedicated hardware component for RTD temperature signal acquisition within CompactLogix controller systems. Hardware Specifications Parameter Specification Model 1769-IR6 Brand Allen-Bradley Origin USA Product Type RTD Analog Input Module Product Line CompactLogix Weight 1.00 lb (0.45 kg) Operating Temp 32 to 140 deg F Storage Temp -40 to 185 deg F Power Consumption 1.5 W maximum heat dissipation Number of Inputs 6 RTD inputs Input Type Resistance Temperature Detector (RTD) Input Ranges 0 to 150 Ohms, 0 to 500 Ohms, 0 to 1000 Ohms, 0 to 3000 Ohms Converter Type Sigma-Delta analog-to-digital converter Current Draw at 5.1 VDC 100 mA Current Draw at 24 VDC 35 mA Common Mode Voltage -10 to 10 VDC Maximum Cable Impedance 25 Ohms Input Impedance Greater than 10 MOhms Relative Humidity 5 to 95%, non-condensing PLC Backplane Communication and I/O Density Scaling The 1769-IR6 integrates with Allen-Bradley CompactLogix controllers through the 1769 backplane interface. Therefore, the module transfers processed RTD measurement data directly to the controller memory structure for logic execution and monitoring. The module supports six independent RTD input channels, which allows engineers to increase temperature measurement density within CompactLogix I/O assemblies. Additionally, the sigma-delta conversion method provides digital signal conversion for resistance-based temperature measurement applications. The module supports selectable resistance ranges, including 0 to 150 Ohms, 0 to 500 Ohms, 0 to 1000 Ohms, and 0 to 3000 Ohms. As a result, users can configure the input characteristics according to different RTD sensor types and temperature measurement requirements. Frequently Asked Questions Q: Does the 1769-IR6 support direct RTD sensor connection?A: Yes. The module accepts RTD resistance signals through six dedicated input channels and converts the measured resistance values into digital data for CompactLogix controller processing. Q: What power loading does the 1769-IR6 place on the CompactLogix system?A: The module draws 100 mA at 5.1 VDC and 35 mA at 24 VDC according to the specified electrical characteristics. Q: Can the 1769-IR6 replace standard analog voltage or current input modules?A: No. The 1769-IR6 is designed specifically for RTD resistance measurement and does not provide standard voltage or 4-20 mA analog input functions. Field Installation Guidelines Install the 1769-IR6 on a compatible CompactLogix 1769 I/O assembly and verify correct module placement before applying system power. Connect RTD wiring according to the controller hardware manual and maintain proper separation between sensor cables and high-voltage power conductors. Use shielded instrumentation wiring when the installation environment contains electrical noise sources. Terminate cable shields according to the site grounding standard. Avoid unnecessary cable extensions because additional resistance can affect RTD measurement accuracy. Before commissioning, verify the configured RTD input range matches the connected sensor specification. Check channel status diagnostics through the controller software to confirm correct signal acquisition.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-OF5 Analog Output Module
Allen-Bradley 1769-OF5 Analog Output Module The Allen-Bradley 1769-OF5, also cataloged as the 1769-OF5 Analog Output Module, operates as a dedicated hardware component for converting controller digital values into voltage and current output signals within CompactLogix and Compact I/O systems. Hardware Specifications Parameter Specification Model 1769-OF5 Brand Allen-Bradley Product Type Analog Output Module Series Compact I/O / 1769 Series Origin USA Operating Temp 0 deg C to 60 deg C Power Consumption 120 mA at 5 VDC; 170 mA at 24 VDC Output Channels 5 configurable analog outputs Output Type Voltage and current output Output Configuration Single-ended or differential Voltage Output Range 0 to 10 VDC, +/- 10 VDC Current Output Range 0 to 20 mA, 4 to 20 mA Resolution 15 bit Voltage Resolution Approximately 320 uV/count across +/- 10 VDC Current Resolution Approximately 0.64 uA/count across 0 to 20 mA Isolation Rating 30 V continuous basic insulation External Power Supply 24 VDC user supply required for current output loops Enclosure Type Open style (IP20) Controller Compatibility CompactLogix 1768/1769 systems and distributed I/O configurations using compatible adapters EtherNet/IP and CompactLogix Integration Features The 1769-OF5 operates as a Compact I/O analog output device within Allen-Bradley control architectures. It exchanges output data through the controller backplane communication interface and transfers processed digital values into proportional field control signals. The module supports EtherNet/IP based system architectures when installed through compatible CompactLogix platforms and communication adapters. Therefore, it can participate in deterministic industrial networks where controller scan timing, I/O density scaling, and firmware compatibility influence system configuration. The analog output channels provide direct electrical interfaces for field devices, including proportional valves, VFD speed references, actuators, and analog instrumentation equipment. Frequently Asked Questions Q: Does the 1769-OF5 require an external 24 VDC supply?A: Yes. The module requires an external 24 VDC user supply for current output loop operation and related module functions. Q: Can the 1769-OF5 generate both voltage and current signals?A: Yes. Each configurable output supports voltage ranges of 0 to 10 VDC and +/- 10 VDC, along with current ranges of 0 to 20 mA and 4 to 20 mA. Q: Is the 1769-OF5 designed for hot-swapping during operation?A: The module does not support unrestricted hot-swapping. Installation and removal should follow Allen-Bradley Compact I/O power isolation procedures to prevent backplane or field wiring faults. Field Installation Guidelines Install the 1769-OF5 on a compatible CompactLogix or Compact I/O mounting system according to the controller hardware manual. Before wiring, remove field power from connected analog devices. Use shielded signal cables for analog current and voltage loops to reduce electrical interference. Connect cable shields according to the system grounding design. Avoid routing analog signal wiring parallel with high-current motor cables, VFD output cables, or switching power conductors. Verify output signal polarity before connecting field devices. Confirm the selected voltage or current range matches the configured controller output data scaling. Maintain proper module spacing, enclosure protection, and environmental conditions according to the applicable Allen-Bradley installation requirements.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-L31ER-NSE CompactLogix 5370 L3 Controller
Allen-Bradley 1769-L31ER-NSE CompactLogix 5370 L3 Controller The Allen-Bradley 1769-L31ER-NSE, also cataloged as the 1769-L31ER-NSE CompactLogix 5370 L3 Controller, operates as a dedicated hardware component for programmable logic execution and EtherNet/IP communication within CompactLogix automation systems. Hardware Specifications Parameter Specification Model 1769-L31ER-NSE Brand Allen-Bradley / Rockwell Automation Origin United States Product Type CompactLogix Controller Product Series CompactLogix 5370 L3 Memory 0.5 MB Communication Interface 2 x EtherNet/IP ports with Device-Level Ring (DLR) support Programming Interface 1 x USB 2.0 full-speed port Motion Control Capacity Up to 16 axes through Integrated Motion on EtherNet/IP I/O Expansion Capacity Up to 16 Compact I/O modules across 3 banks Power Supply Voltage 24 VDC Enclosure Type Open style EtherNet/IP and Logix Platform Integration The 1769-L31ER-NSE controller uses the Logix control platform for application execution and device communication. It supports EtherNet/IP networks with dual communication ports, allowing linear and Device-Level Ring network configurations. In addition, the controller exchanges data through deterministic industrial Ethernet communication paths. Furthermore, the CompactLogix architecture provides I/O density scaling through local Compact I/O expansion. The controller connects to distributed devices and field components through EtherNet/IP communication, while Studio 5000 Logix Designer provides the programming environment. The controller supports firmware flash compatibility within the CompactLogix 5370 L3 platform. Therefore, users must verify controller firmware revision compatibility before applying firmware updates or replacing hardware components. Frequently Asked Questions (FAQ) Q: Does the 1769-L31ER-NSE support EtherNet/IP ring communication?A: Yes. The controller provides dual EtherNet/IP ports and supports Device-Level Ring (DLR) network configurations. Q: Can the 1769-L31ER-NSE control motion devices?A: Yes. The controller supports up to 16 motion axes through Integrated Motion on EtherNet/IP. Q: Does the controller support hot-swapping of Compact I/O modules?A: No hot-swap capability is specified for this controller. Power removal and standard installation procedures should be followed when adding or removing I/O modules. Field Installation Guidelines Install the 1769-L31ER-NSE controller on a suitable DIN rail mounting system with proper mechanical support. Keep Ethernet communication cables separated from high-voltage power conductors to reduce electrical interference. Connect the protective grounding system according to industrial control panel practices. Maintain correct shielding termination for Ethernet cables when required by the installation environment. Verify the 24 VDC power supply polarity before energizing the controller. Confirm the firmware revision, network addressing, and I/O configuration before placing the controller into operational service.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-OV32T CompactLogix 32-Point DC Output Module
Allen-Bradley 1769-OV32T CompactLogix 32-Point DC Output Module Configured for 24 VDC sinking output signal execution in CompactLogix EtherNet/IP controller platforms, the Allen-Bradley 1769-OV32T (1769-OV32T Output Module) provides direct physical switching control for connected field devices. Hardware Specifications Parameter Specification Model 1769-OV32T Brand Allen-Bradley Origin USA Product Line CompactLogix Module Type Digital Output Module Output Configuration Sinking Output Number of Outputs 32 Points Output Voltage 24 VDC Enclosure Type Open Series A and B Weight 0.50 lbs (0.23 kg) Wire Type Copper, 90 deg C Solid Wire Size 22-14 AWG Stranded Wire Size 22-16 AWG UPC 781180609572 EtherNet/IP and CompactLogix I/O Integration The 1769-OV32T operates as a CompactLogix expansion I/O module that exchanges output data through the controller backplane interface. Therefore, the module supports I/O density scaling within 1769 system configurations by providing 32 discrete sinking output channels in a compact installation footprint. Additionally, the module connects field wiring through standard terminal connections and controls DC loads according to the configured output state from the CompactLogix processor. The design supports firmware flash compatibility within the compatible CompactLogix hardware environment when matched with the applicable controller and software revision. Frequently Asked Questions Q: What output type does the Allen-Bradley 1769-OV32T support?A: The 1769-OV32T provides 32 sinking DC output points designed for 24 VDC field device control applications. Q: Can the 1769-OV32T operate as an analog output module?A: No. The 1769-OV32T is a discrete digital output module and does not provide analog signal generation. Q: What wire specifications apply to field connections?A: The module supports copper conductors with solid wire sizes from 22-14 AWG and stranded wire sizes from 22-16 AWG according to the supplied specifications. Field Installation Guidelines Install the 1769-OV32T on the CompactLogix 1769 system according to the controller and I/O assembly requirements. Verify that the power supply capacity matches the total backplane load before adding the module to an existing rack configuration. Keep DC output wiring separated from high-voltage AC conductors to reduce electrical interference. Use copper conductors with appropriate insulation ratings for the installation environment. Terminate field wiring securely and maintain correct polarity for all 24 VDC output connections. Ground cable shields at the designated control panel grounding point when shielded wiring is applied. Avoid routing output signal cables near high-current switching devices, motor feeders, or sources of electromagnetic noise. Confirm module status indicators and controller diagnostics after installation. Validate each output channel through the CompactLogix program before connecting external loads.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-SM2 CompactLogix Communication Module
Allen Bradley 1769-SM2 CompactLogix Communication Module Configured for DSI/Modbus drive communication in CompactLogix systems, the Allen Bradley 1769-SM2 (1769-SM2 Communication Module) provides direct network execution between CompactLogix controllers and PowerFlex 4-Class drives. Hardware Specifications Parameter Specification Model 1769-SM2 Brand Allen Bradley Origin USA Product Type Communication Module Series CompactLogix Network Type DSI/Modbus Weight 0.38 lbs (0.17 kg) Dimensions Not specified Operating Temp -10 to 50 deg C Power Consumption 350 mA at 5 VDC from Compact I/O power supply Installation Location Within 4 slots of the system power supply Mounting Method DIN rail mounting or panel mounting Panel Mount Screws Two #8 or M4 panhead screws Number of Channels 3 channels Channel Connector Type RJ45 connectors Operating Modes Single Mode and Multi-Drive Mode Single Mode Connection Capacity 1 PowerFlex 4-Class drive connection Multi-Drive Mode Capacity 5 PowerFlex 4-Class drive connections per channel, 15 total connections Compatible Drives PowerFlex 4-Class drives EtherNet/IP and Industrial Control Integration The 1769-SM2 module operates as a CompactLogix communication interface for DSI/Modbus drive networks. Therefore, it transfers drive control and monitoring data through three independent communication channels using RJ45 connectors. Furthermore, the module supports PowerFlex 4-Class drive integration through configurable Single Mode and Multi-Drive Mode operation. In Multi-Drive Mode, each channel manages multiple drive connections, which increases I/O density scaling within CompactLogix-based control architectures. The module receives power from the Compact I/O backplane system and consumes 350 mA at 5 VDC. Additionally, installation requires placement within four slots of the system power supply to maintain proper electrical distribution. Frequently Asked Questions (FAQ) Q: How many PowerFlex 4-Class drives can the 1769-SM2 communicate with?A: The module supports one drive connection in Single Mode. In Multi-Drive Mode, each channel supports five PowerFlex 4-Class drive connections, allowing up to fifteen total connections across three channels. Q: Can the 1769-SM2 module be installed on a DIN rail or panel?A: Yes. The module supports DIN rail mounting and panel mounting with two #8 or M4 panhead screws. Q: Does the 1769-SM2 require a separate external power supply?A: No. The module receives operating power from the Compact I/O power supply through the system backplane connection. Field Installation Guidelines Install the 1769-SM2 module within four slots of the CompactLogix system power supply to maintain specified power distribution conditions. Connect RJ45 communication cables according to the assigned DSI/Modbus channel configuration. Keep communication wiring separated from high-voltage power conductors to reduce electrical interference. For panel mounting applications, secure the module using the specified screw type and verify mechanical stability before system operation. Verify the Compact I/O power supply load capacity before adding the module to an existing controller assembly. Confirm communication parameters and drive addressing before enabling drive control functions.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-CRL1 CompactLogix Expansion Cable
Allen-Bradley 1769-CRL1 CompactLogix Expansion Cable The Allen-Bradley 1769-CRL1, also cataloged as the 1769-CRL1 Expansion Cable, operates as a dedicated hardware component for right-to-left bus extension between CompactLogix and MicroLogix 1500 controller systems. It provides a physical connection path for CompactLogix I/O expansion assemblies. Hardware Specifications Parameter Specification Model 1769-CRL1 Brand Allen-Bradley Origin USA Weight 0.63 lbs (0.28 kg) Dimensions 1 ft cable length Operating Temp 32 deg F to 140 deg F Power Consumption 33.6 Watts Product Line CompactLogix Module Type Expansion Cable Connection Direction Right to Left Bus Extension Cable Length 1 ft Isolation Voltage 30 Volts Continuous Backplane Current 1.4 Amps at 24 Volts Power Dissipation 7.5 Watts Termination Supplied with termination caps Communication Function CompactLogix bus extension connection EtherNet/IP and CompactLogix Bus Integration The 1769-CRL1 functions as a passive bus extension component within the Allen-Bradley CompactLogix platform. It maintains the physical connection between separated controller and I/O assemblies. Therefore, the cable supports right-to-left expansion arrangements where module positioning requires additional spacing. The CompactLogix architecture uses backplane bus communication for controller and I/O module data exchange. The 1769-CRL1 provides the required electrical interconnection path while maintaining the specified isolation voltage and current loading characteristics. Furthermore, the cable enables connection between CompactLogix controllers and MicroLogix 1500 systems that use compatible 1769 expansion hardware. Frequently Asked Questions Q: What is the primary function of the Allen-Bradley 1769-CRL1 cable?A: The 1769-CRL1 provides a right-to-left bus extension connection for CompactLogix expansion assemblies. It transfers backplane communication signals between connected hardware sections. Q: Does the 1769-CRL1 include termination components?A: Yes. The 1769-CRL1 includes termination caps required for proper installation within the CompactLogix expansion configuration. Q: Can the 1769-CRL1 be used with MicroLogix 1500 controllers?A: Yes. The cable supports connection between compatible Allen-Bradley CompactLogix and MicroLogix 1500 controller systems. Field Installation Guidelines Install the 1769-CRL1 according to the CompactLogix hardware configuration requirements. Verify the required right-to-left bus orientation before connecting the cable between modules. Ensure that the termination caps remain installed at the correct bus endpoints. Avoid excessive bending, mechanical stress, or routing near high-voltage conductors that may introduce electrical interference. During installation, inspect connector contacts for contamination or mechanical damage. Maintain proper cabinet grounding practices and separate communication wiring from power circuits to reduce electrical noise exposure.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-L24ER-QB1B CompactLogix Programmable Automation Controller
Allen-Bradley 1769-L24ER-QB1B CompactLogix Programmable Automation Controller Configured for controller task execution and Ethernet/IP communication management in CompactLogix control networks, the Allen-Bradley 1769-L24ER-QB1B (1769-L24ER-QB1B Programmable Automation Controller) provides direct processor control and I/O management functions. Hardware Specifications Parameter Specification Model 1769-L24ER-QB1B Brand Allen-Bradley Origin United States Product Type Programmable Automation Controller Series CompactLogix Weight 0.91 kg (2.00 lbs) Dimensions Not specified in provided data Operating Temp 0 to 60 deg C Power Consumption 12 W maximum power dissipation User Memory 750 KB Controller Tasks 32 tasks, 100 programs per task Communication Ports 2 Ethernet ports, 1 USB port Communication Protocols EtherNet/IP and DeviceNet Local Expansion Modules Maximum 4 modules Current Draw 1.54 A at 5 VDC; 0.95 A at 24 VDC Isolation Voltage 30 V continuous Mounting Method DIN rail or panel mount Embedded Power Supply 24 VDC isolated input EtherNet/IP and CompactLogix Control Architecture The 1769-L24ER-QB1B operates as a CompactLogix controller with integrated Ethernet communication capability. It manages application logic through task-based execution, supporting up to 32 controller tasks with 100 programs assigned to each task. Furthermore, the controller uses EtherNet/IP communication for industrial network data exchange and provides USB connectivity for local programming and configuration. The integrated Ethernet ports support distributed control architectures while maintaining direct communication between controller resources and connected devices. The CompactLogix platform supports I/O density scaling through local expansion modules. Therefore, the controller can extend its processing functions with up to 4 local expansion modules according to system requirements. Frequently Asked Questions Q: Does the 1769-L24ER-QB1B support redundant controller operation?A: The 1769-L24ER-QB1B does not provide built-in controller redundancy functions. Redundant configurations require compatible system-level architectures and additional hardware evaluation. Q: What communication interfaces are available on the 1769-L24ER-QB1B?A: The controller provides two Ethernet ports and one USB port. It supports EtherNet/IP communication and local USB-based programming functions. Q: Can the 1769-L24ER-QB1B use local expansion modules?A: Yes. The controller supports up to 4 local expansion modules within the CompactLogix system configuration. Field Installation Guidelines Install the 1769-L24ER-QB1B on a suitable DIN rail or panel mounting surface according to the mechanical installation requirements of the control cabinet. Use shielded communication cables for Ethernet connections in electrically noisy environments. Connect cable shields according to the site grounding practice to reduce electromagnetic interference. Keep Ethernet communication wiring separated from high-voltage power conductors and motor drive cables. Maintain proper cabinet airflow to prevent temperature accumulation around the controller. Before applying power, verify the 24 VDC supply polarity, grounding arrangement, and module installation position. Confirm firmware compatibility between the controller, programming software, and connected CompactLogix system components before commissioning.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-L34ER CompactLogix 5370 L3 Controller
Allen-Bradley 1769-L34ER CompactLogix 5370 L3 Controller The Allen-Bradley 1769-L34ER, also cataloged as the 1769-L34ER CompactLogix 5370 L3 Controller, operates as a programmable automation controller for executing logic processing, I/O coordination, and EtherNet/IP communication tasks within CompactLogix control platforms. Hardware Specifications Parameter Specification Model 1769-L34ER Brand Allen-Bradley Origin USA Operating Temp 0 deg C to 60 deg C Power Consumption Requires 24 VDC isolated power supply Controller Family CompactLogix 5370 L3 User Memory 2.0 MB Ethernet Interface 2 x RJ45 EtherNet/IP ports with DLR support USB Interface 1 x USB 2.0 full-speed programming port Local I/O Capacity Up to 30 I/O modules across 3 I/O banks Motion Control Supports up to 16 axes through Integrated Motion over EtherNet/IP Isolation Voltage 50 V continuous, reinforced insulation type Enclosure Type Open-style, IP00 Programming Software Studio 5000 Logix Designer version 20 or later Communication Protocols EtherNet/IP, Modbus via Add-On Instructions, DF1, DH-485 via serial modules EtherNet/IP and CompactLogix Communication Features The Allen-Bradley 1769-L34ER controller integrates dual EtherNet/IP interfaces for industrial network communication. The controller supports linear, star, and Device-Level Ring (DLR) topologies, allowing flexible network architecture design. Furthermore, the controller uses EtherNet/IP deterministic communication for coordinated I/O exchange and motion synchronization. The integrated network interface supports CIP Motion functions, enabling multi-axis control without additional communication adapters. The controller architecture supports backplane bus communication velocity management and I/O density scaling within the CompactLogix 5370 L3 platform. Therefore, users can expand local I/O configurations while maintaining coordinated controller execution. Frequently Asked Questions Q: Does the 1769-L34ER support hot-swapping of CompactLogix I/O modules?A: No. The 1769-L34ER system does not support live removal or insertion of local I/O modules. Power must be removed before changing hardware connections. Q: What network function is provided by the two Ethernet ports?A: The two RJ45 EtherNet/IP ports support network communication and Device-Level Ring (DLR) topology configurations for connected automation devices. Q: Which software environment configures the 1769-L34ER controller?A: The controller uses Studio 5000 Logix Designer software for programming, configuration, and firmware-compatible controller management. Field Installation Guidelines Install the 1769-L34ER controller on a DIN rail inside an appropriate industrial enclosure. Maintain proper spacing around the controller to support airflow and heat dissipation. Connect the 24 VDC power supply according to the controller wiring requirements. Use properly rated industrial wiring and separate communication cables from high-voltage power conductors to reduce electrical interference. For EtherNet/IP connections, use industrial Ethernet cables with suitable shielding and apply correct grounding practices. Verify network topology configuration before commissioning the controller. Confirm firmware compatibility between the controller, Studio 5000 Logix Designer software, and connected CompactLogix modules before system startup.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-BOOLEAN CompactLogix Boolean Control Module
Allen-Bradley 1769-BOOLEAN CompactLogix Boolean Control Module Configured for Boolean signal execution in CompactLogix control systems, the Allen-Bradley 1769-BOOLEAN (1769-BOOLEAN Boolean Control Module) provides direct physical and electrical control of sink inputs and source outputs. The module operates at 24 VDC and uses I/O memory mapping for application-specific configuration. Hardware Specifications Parameter Specification Model 1769-BOOLEAN Brand Allen-Bradley Origin USA Product Series CompactLogix Module Type Boolean Control Module Weight 0.38 lb (0.17 kg) Dimensions Not specified Operating Temp Not specified Power Consumption 33.6 W Voltage Rating 24 VDC Input Type Sink Inputs Output Type Source Outputs Series A and B Isolation Voltage 30 V continuous Enclosure Type Open Backplane Current 1.4 A at 24 V Power Dissipation 7.5 W I/O Configuration Method I/O Memory Mapping Terminal Block Replaceable Access Door Replaceable EtherNet/IP and CompactLogix I/O Integration The 1769-BOOLEAN module operates within the CompactLogix platform through the local I/O architecture. Therefore, the controller exchanges Boolean data through the mapped I/O memory structure. The module supports configurable input and output behavior, which allows engineers to define signal handling according to machine control requirements. In addition, the CompactLogix backplane communication system transfers control data between the controller and the Boolean module. The module supports I/O density scaling within the CompactLogix family, while firmware compatibility depends on the installed controller and system revision. Frequently Asked Questions Q: What type of signals does the 1769-BOOLEAN module process?A: The module processes Boolean signals through sink-type inputs and source-type outputs with a 24 VDC operating voltage. Q: Can the terminal block of the 1769-BOOLEAN module be replaced?A: Yes. The terminal block and access door can be replaced using compatible CompactLogix accessory components. Q: Does the 1769-BOOLEAN module require a separate communication interface?A: No. The module communicates through the CompactLogix local I/O backplane connection. Field Installation Guidelines Install the 1769-BOOLEAN module on a compatible CompactLogix system rack according to the controller and I/O installation manual. Maintain proper separation between control wiring and high-voltage power conductors to reduce electrical interference. Connect field wiring with correct polarity for sink inputs and source outputs. Use suitable grounding practices for the control cabinet and verify shield termination methods when signal cables require noise protection. Confirm backplane power loading before adding additional modules to the CompactLogix system. Before commissioning, check I/O mapping configuration, controller recognition, and field signal response through the programming environment.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-L30ER CompactLogix Programmable Automation Controller
Allen Bradley 1769-L30ER CompactLogix Programmable Automation Controller The Allen Bradley 1769-L30ER, also cataloged as the 1769-L30ER Programmable Automation Controller, operates as a dedicated hardware component for controller execution and EtherNet/IP communication within CompactLogix control systems. Hardware Specifications Parameter Specification Model 1769-L30ER Brand Allen Bradley Origin USA Product Type Programmable Automation Controller Product Line CompactLogix Weight 1.06 lbs (0.48 kg) Power Consumption 4.5 W maximum power dissipation User Memory 1 MB Controller Tasks 32 Tasks, 100 Programs per Task Communications Ports 2 Ethernet Ports and 1 USB Port Communication Options EtherNet/IP and DeviceNet Maximum EtherNet/IP Nodes Up to 16 Nodes Current Draw 500 mA at 5 VDC; 225 mA at 24 VDC Isolation Voltage 30 V continuous Mounting Options DIN Rail or Panel Mount Enclosure Type Open-Style EtherNet/IP and CompactLogix Controller Architecture The 1769-L30ER integrates CompactLogix controller functions with EtherNet/IP network communication. It provides two Ethernet ports and one USB programming interface for controller configuration, diagnostics, and application transfer. Additionally, the controller supports deterministic EtherNet/IP communication structures with up to 16 network nodes. The controller executes up to 32 tasks with 100 programs per task. Therefore, it supports structured application organization for machine control, sequential logic, and distributed I/O processing. The CompactLogix backplane bus communication manages data exchange between the controller and connected 1769 I/O modules. The firmware environment supports CompactLogix application development and controller configuration through compatible programming software. Furthermore, the 1 MB user memory capacity stores application logic, controller data, and operational parameters. Frequently Asked Questions Q: What communication interfaces are available on the 1769-L30ER?A: The controller provides two Ethernet ports for EtherNet/IP communication and one USB port for programming and configuration functions. Q: How many controller tasks can the 1769-L30ER execute?A: The controller supports up to 32 tasks, with each task allowing up to 100 programs. Q: Can the 1769-L30ER support distributed I/O systems?A: Yes. The controller communicates with CompactLogix I/O modules through the 1769 backplane and supports EtherNet/IP networked devices. Field Installation Guidelines Install the 1769-L30ER on a compatible DIN rail or panel mounting surface according to the CompactLogix installation requirements. Ensure sufficient clearance around the open-style enclosure for wiring access and heat dissipation. Use shielded Ethernet cables in environments with high electrical noise. Ground cable shields according to industrial wiring practices to reduce electromagnetic interference. Separate communication wiring from high-voltage power conductors to minimize signal coupling. Verify the controller power supply capacity before installation. The connected 1769 modules must remain within the available backplane current limits. Confirm firmware compatibility between the controller, programming software, and connected I/O modules before commissioning.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-L35CR CompactLogix ControlNet Processor Module
Allen-Bradley 1769-L35CR CompactLogix ControlNet Processor Module Configured for ControlNet data communication and CPU execution in CompactLogix systems, the Allen-Bradley 1769-L35CR (1769-L35CR Processor Module) provides direct processing and network interface functions. The module contains 1.5 MB memory and operates as a CompactLogix controller component with ControlNet communication capability. Hardware Specifications Parameter Specification Model 1769-L35CR Brand Allen-Bradley Origin USA Weight 0.81 lbs (0.37 kg) Product Category PLC Processor Module Product Line CompactLogix Module Type Processor Module Communication ControlNet and Serial communication Memory 1.5 MB Series A and B Wire Type Copper, 90 deg C Wire Size Solid 22-14 AWG Wire Size Stranded 22-16 AWG UNSPSC 32151705 Lifecycle Status Discontinued/Obsolete Industrial Control Network and PLC Integration Features The 1769-L35CR belongs to the Allen-Bradley CompactLogix controller family and supports deterministic industrial communication through ControlNet networks. The processor manages application execution, I/O data exchange, and controller tasks within the CompactLogix platform. Furthermore, the module supports industrial control architectures that require backplane bus communication velocity, I/O density scaling, and firmware flash compatibility across CompactLogix hardware configurations. The processor module exchanges data between controller memory, connected I/O modules, and network devices through defined communication paths. Frequently Asked Questions Q: What communication function does the 1769-L35CR provide?A: The 1769-L35CR provides ControlNet communication capability with CompactLogix processor functions for network data exchange and controller operations. Q: Does the 1769-L35CR include controller memory?A: Yes. The processor module includes 1.5 MB of memory for application storage and controller execution functions. Q: Can the 1769-L35CR operate with CompactLogix I/O modules?A: Yes. The module is designed for CompactLogix systems and communicates with compatible 1769 series I/O modules through the controller platform. Field Installation Guidelines Install the 1769-L35CR processor module according to the CompactLogix hardware installation requirements. Verify that the module is correctly seated on the 1769 backplane before applying power. Maintain proper separation between communication wiring and high-voltage power conductors to reduce electrical interference. Use approved copper conductors with suitable insulation ratings and terminate wiring according to industrial control panel practices. Before commissioning, confirm ControlNet network connections, controller firmware compatibility, and application program configuration. Ground cable shields according to site electrical standards to minimize noise coupling during operation.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-OB32 CompactLogix Output Module
Allen Bradley 1769-OB32 CompactLogix Output Module Configured for discrete DC output execution in CompactLogix control systems, the Allen Bradley 1769-OB32 (1769-OB32 Output Module) provides direct physical switching control for 32 field output channels through the CompactLogix backplane. Hardware Specifications Parameter Specification Model 1769-OB32 Brand Allen Bradley Origin USA Product Type Digital Output Module Product Line CompactLogix Weight 0.75 lbs (0.34 kg) Power Consumption 300 mA at 5.1 VDC backplane current draw Output Type 24 VDC transistor output Number of Outputs 32 outputs Output Groups 2 groups of 16 outputs Operating Voltage 20.4 to 26.4 VDC Output Delay On 0.1 ms Output Delay Off 1 ms Minimum On-State Current 1 mA Maximum Heat Dissipation 4.5 W Slot Width 1.5 slots Mounting Options Panel mounting and DIN rail mounting UPC 611320915662 EtherNet/IP and CompactLogix I/O Integration The 1769-OB32 operates as a CompactLogix digital output component with controller-managed I/O communication through the 1769 backplane interface. Therefore, the module transfers output commands from the processor to external field devices with a defined update response. In addition, the module supports high-density I/O configuration with 32 output points arranged into two isolated output groups of 16 channels. The compact I/O density allows system designers to scale control panels while maintaining standard CompactLogix hardware architecture. Frequently Asked Questions Q: What type of field signals does the 1769-OB32 output module provide?A: The module provides 24 VDC transistor outputs for controlling connected DC field devices within the specified operating voltage range of 20.4 to 26.4 VDC. Q: How does the 1769-OB32 connect within a CompactLogix system?A: The module installs into a 1769 Compact I/O assembly and communicates with the CompactLogix controller through the local backplane interface. Q: What installation limitations should be considered for this output module?A: Engineers should verify available chassis space, backplane power loading, field wiring requirements, and output current requirements before installation. Field Installation Guidelines Install the 1769-OB32 module on an approved panel or DIN rail mounting system according to CompactLogix installation practices. Maintain proper separation between DC field wiring and high-voltage conductors to reduce electrical interference. Use suitable terminal wiring methods and verify polarity before applying field power. Connect cable shields and grounding conductors according to the control cabinet grounding design. Confirm that the connected loads match the module output voltage and current specifications before commissioning. Verify controller configuration, I/O addressing, and output channel assignment through the programming environment before placing the module into operational service.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-IQ16 CompactLogix Input Module
Allen Bradley 1769-IQ16 CompactLogix Input Module The Allen Bradley 1769-IQ16, also cataloged as the 1769-IQ16 Input Module, operates as a dedicated hardware component for digital signal acquisition within CompactLogix controller platforms. It provides sixteen 24 VDC sink/source input channels arranged in two groups of eight points. Hardware Specifications Parameter Specification Model 1769-IQ16 Brand Allen Bradley Origin United States Product Type Digital Input Module Product Line CompactLogix Number of Inputs 16 inputs, 8 points per group Voltage Category 24 VDC Sink/Source Operating Voltage Range 10 to 30 VDC at 30 deg C; 10 to 26.4 VDC at 60 deg C Input Delay 8 ms on/off delay Weight 0.44 lbs (0.20 kg) Dimensions Not specified in provided data Operating Temp 0 to 60 deg C Power Consumption 3.55 W maximum heat dissipation Current Draw 115 mA at 5.1 V Maximum Off-State Voltage 5 VDC Maximum Off-State Current 1.5 mA Slot Width 1 slot Mounting Type DIN rail or panel mount Enclosure Type Open-style Compatible Power Supplies 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Communication Interface CompactLogix backplane bus CompactLogix Industrial Control Integration The 1769-IQ16 uses CompactLogix backplane communication for controller-level data exchange. The module transfers discrete input states through the local I/O architecture, while the controller manages execution logic and process sequencing. In addition, the module supports I/O density scaling within CompactLogix systems by providing sixteen digital input points in a single slot. The sink/source input design allows connection with multiple field device wiring configurations, including proximity switches, limit switches, and discrete sensors. The module follows Allen Bradley industrial control architecture principles, including backplane bus communication velocity management, deterministic I/O data updates, and firmware compatibility within supported CompactLogix platforms. Frequently Asked Questions Q: Does the 1769-IQ16 support both sinking and sourcing input devices?A: Yes. The module supports 24 VDC sink/source input configurations through its sixteen digital input channels. Q: Can the 1769-IQ16 operate in a hot-swappable condition?A: No. The module requires installation or removal according to CompactLogix system power handling procedures. Field replacement should follow controller and rack safety requirements. Q: What wiring considerations apply when installing the 1769-IQ16?A: Field wiring should maintain proper separation between discrete input circuits and high-energy conductors. Shielded cable grounding practices should follow the requirements of the connected field devices. Field Installation Guidelines Install the 1769-IQ16 module on a compatible CompactLogix chassis or MicroLogix 1500 system according to the hardware installation manual. Verify the 24 VDC field supply polarity before connecting input devices. Use appropriate terminal wiring methods and maintain separation between signal wiring and power conductors to reduce electrical interference. Ground cable shields according to the field device manufacturer recommendations. Confirm that the module seating, terminal connections, and DIN rail or panel mounting hardware provide proper mechanical retention before system startup. Check input channel status through the controller software after installation. Validate each connected field signal before placing the control application into normal operation.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-IQ32T Compact I/O Digital Input Module
Allen Bradley 1769-IQ32T Compact I/O Digital Input Module The Allen Bradley 1769-IQ32T, also cataloged as the 1769-IQ32T Discrete Input Module, operates as a dedicated hardware component for 24 VDC digital signal acquisition within CompactLogix and MicroLogix 1500 control platforms. Hardware Specifications Parameter Specification Model 1769-IQ32T Brand Allen Bradley Origin United States Product Type Discrete Input Module Product Line CompactLogix Product Family Compact I/O Module Type Compact DC Input Module Input Type Digital Input Number of Inputs 32 channels Input Groups 4 groups, 8 inputs per group Voltage Rating 24 VDC sink/source Operating Voltage Range 10-30 VDC at 30 deg C; 10-26.4 VDC at 60 deg C Off-state Voltage 5 VDC maximum On-state Voltage 10 VDC minimum Input Delay, On 8 ms Power Supply Distance Rating 8 modules Communication Cable 32 Point prefabricated cable Compatible Controllers MicroLogix 1500, CompactLogix Wiring Accessory 1746-N3 shipped with module Replacement Terminal Block 1769-RTBN18 Wiring System Allen Bradley 1492 wiring systems Series A and B Wire Type Copper, 90 deg C Wire Size 22-14 AWG Weight 0.31 lbs (0.14 kg) Mounting DIN rail or panel mount Power Supply Compatibility 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 EtherNet/IP and CompactLogix I/O Integration The 1769-IQ32T supports high-density digital input collection through the Compact I/O architecture. Therefore, the module connects to CompactLogix and MicroLogix 1500 systems through the 1769 backplane interface. Its 32-channel design increases I/O density while maintaining segmented input grouping for field wiring organization. Additionally, the CompactLogix platform provides deterministic controller communication through the local I/O bus. The module configuration integrates with RSLogix 500 and Studio 5000 programming environments according to controller family compatibility. The module supports Allen Bradley I/O density scaling strategies by allowing multiple Compact I/O modules within the controller system. The power supply distance rating of 8 modules defines the maximum installation position relative to the controller or power source. Frequently Asked Questions Q: What type of field signals can the 1769-IQ32T accept?A: The module accepts 24 VDC digital input signals configured as sink/source inputs. It supports discrete ON/OFF field devices connected through the 32 input channels. Q: Can the 1769-IQ32T operate with both CompactLogix and MicroLogix 1500 systems?A: Yes. The module is designed for use with 1769 CompactLogix controllers and MicroLogix 1500 systems that support Compact I/O expansion. Q: Does the module require a separate terminal block for field wiring?A: The module uses a 1769-RTBN18 replacement terminal block and supports Allen Bradley 1492 wiring systems with prefabricated cable solutions. Field Installation Guidelines Install the 1769-IQ32T on a DIN rail or panel surface according to the controller platform installation requirements. Verify that the module remains within the specified power supply distance rating before adding additional I/O modules. Use copper conductors with suitable insulation ratings for field connections. Maintain proper separation between digital input wiring and high-voltage or high-noise conductors to reduce electrical interference. Connect cable shields and grounding points according to the control cabinet grounding design. Avoid routing input cables parallel to motor power cables, variable frequency drive outputs, or other high-current circuits. Before applying field voltage, confirm input polarity, sink/source configuration, and terminal assignments. Verify controller recognition and I/O configuration parameters after installation.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-OA8 CompactLogix AC Output Module
Allen Bradley 1769-OA8 CompactLogix AC Output Module Configured for AC discrete signal switching in CompactLogix and MicroLogix 1500 control platforms, the Allen Bradley 1769-OA8 (1769-OA8 Compact I/O Output Module) provides direct electrical execution through eight AC output channels. Hardware Specifications Parameter Specification Model 1769-OA8 Brand Allen Bradley Origin USA Product Type Compact I/O Output Module Product Line CompactLogix Module Type Discrete AC Output Module Compatible Controllers 1769 CompactLogix, MicroLogix 1500 Weight 0.44 lbs (0.20 kg) Power Consumption 145 mA at +5 VDC backplane, 1.125 W Number of Outputs 8 Output Configuration 2 groups of 4 channels Voltage Category 120-240 VAC Operating Voltage Range 85 VAC to 265 VAC Operating Frequency 47 Hz to 63 Hz Signal Delay Turn-on: 1/2 cycle; Turn-off: 1/2 cycle Bus Current Draw 145 mA at +5 VDC line Heat Dissipation 2.12 W Wire Size Solid 22 to 14 AWG Wire Size Stranded 22 to 16 AWG Power Supply Distance Rating 8 modules Mounting Method DIN Rail; Panel Mount Compatible Power Supplies 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 Series Compatibility Series A and B UPC 662468992848 EtherNet/IP and CompactLogix I/O Architecture The 1769-OA8 operates as a CompactLogix discrete output component within the 1769 I/O architecture. The module exchanges output status through the controller backplane interface and supports modular I/O density expansion. Therefore, system designers can integrate the module into CompactLogix assemblies while maintaining standard rack power and communication structures. The module supports industrial control applications requiring AC load switching. Additionally, the dual-group output arrangement separates eight channels into two isolated control groups, allowing flexible field wiring configurations. Frequently Asked Questions Q: Can the 1769-OA8 operate with MicroLogix 1500 controllers?A: Yes. The 1769-OA8 supports MicroLogix 1500 systems and 1769 CompactLogix platforms according to the supplied compatibility information. Q: What AC voltage range does the 1769-OA8 output circuit support?A: The module operates within an 85 VAC to 265 VAC range at 47 Hz to 63 Hz frequency. Q: How should field wiring be connected to the output channels?A: Field wiring should follow the specified wire size range and industrial electrical installation practices. Separate routing from low-level signal wiring helps reduce electrical interference. Field Installation Guidelines Install the 1769-OA8 on a compatible 1769 CompactLogix assembly or supported MicroLogix 1500 configuration using DIN Rail or panel mounting methods. Verify that the controller power supply provides sufficient backplane current capacity before installation. The module requires 145 mA at the +5 VDC backplane line and dissipates 2.12 W during operation. Route AC output wiring separately from communication cables and low-voltage analog signal wiring. Use appropriate grounding methods for the control cabinet and maintain proper terminal connections according to industrial electrical standards. Before applying field power, confirm output voltage compatibility, channel grouping configuration, and load requirements. The two output groups contain four channels each, so wiring plans should consider the group arrangement during panel design.
$200.00 $100.00
-
Allen Bradley Allen-Bradley 1769-L31 CompactLogix Controller
Allen-Bradley 1769-L31 CompactLogix Controller Configured for serial control execution in CompactLogix PAC systems, the Allen-Bradley 1769-L31 (1769-L31 Controller) provides direct physical and electrical execution through dual RS232 communication channels, 512 KB user memory, and modular I/O expansion capability. Hardware Specifications Parameter Specification Model 1769-L31 Brand Allen-Bradley Origin USA Product Type Controller Product Line CompactLogix Module Type Control Module Weight 0.69 lbs (0.31 kg) Operating Temp 0 to 60 deg C Power Consumption Not specified in provided data Memory 512 KB Communication Ports Two RS232 ports Channel Isolation Channel 0: Fully isolated; Channel 1: Non-isolated Communication Protocols DH485, DF1, ASCII Maximum I/O Modules Supported 16 modules Maximum I/O Banks Supported 3 banks Power Supply Distance Rating 8 modules Battery 1769-BA Series A and B Enclosure Type Rating Open Style Wire Type Copper, 90 deg C Wire Size (Solid) 22-14 AWG Programming Cable 1747-CP3 / 1756-CP3 Vibration Rating Operating: 10 to 500 Hz, 5G, 0.030 in. peak-to-peak UPC 10612598313652 Industrial Control Network Integration The 1769-L31 controller operates within the Allen-Bradley CompactLogix platform and manages local I/O execution through the 1769 backplane architecture. Therefore, the controller supports modular I/O density scaling with up to 16 connected I/O modules distributed across three I/O banks. The controller provides two RS232 serial communication ports. Channel 0 supports full electrical isolation, while Channel 1 provides a non-isolated serial interface. In addition, the module supports DH485, DF1, and ASCII communication protocols for serial device integration. The CompactLogix architecture uses firmware-controlled processor functions to coordinate application execution, I/O scanning, and serial communication tasks. Furthermore, the controller supports integration with compatible programming environments through specified programming cables. Frequently Asked Questions Q: How many I/O modules can the 1769-L31 controller support?A: The 1769-L31 supports up to 16 CompactLogix I/O modules and allows expansion across up to 3 I/O banks. Q: Are both RS232 communication channels electrically isolated?A: No. Channel 0 provides full isolation, while Channel 1 uses a non-isolated RS232 interface. Q: Which battery module does the 1769-L31 require?A: The controller uses the Allen-Bradley 1769-BA battery module for memory retention functions. Field Installation Guidelines Install the 1769-L31 controller within an open-style industrial enclosure that provides mechanical protection and environmental control. Use copper conductors rated for 90 deg C operation and follow the specified 22-14 AWG solid wire range for field connections. Maintain proper separation between serial communication wiring and high-voltage power conductors to reduce electrical interference. Connect the programming cable through the designated serial interface and verify the selected communication protocol before commissioning. When installing RS232 devices, confirm the isolation requirements of each connected channel to prevent unwanted ground loops. Verify the installed battery condition before system startup and follow the CompactLogix platform procedures for controller configuration, firmware compatibility, and application loading.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-L35E CompactLogix Ethernet Controller
Allen Bradley 1769-L35E CompactLogix Ethernet Controller The Allen Bradley 1769-L35E, also cataloged as the 1769-L35E Ethernet Controller, operates as a dedicated hardware component for controller communication and I/O execution within CompactLogix Ethernet/IP systems. Hardware Specifications Parameter Specification Model 1769-L35E Brand Allen Bradley Origin United States Product Type Ethernet Controller Product Line CompactLogix Weight 0.75 lbs (0.34 kg) Operating Temp 0 to 60 deg C Power Consumption 5.5 W User Memory 1.5 MB Communication Ports 1 Ethernet port, 1 RS-232 serial port Compatible CompactFlash Card 1784-CF128 Maximum I/O Modules 30 Maximum I/O Banks 3 Current Draw at 5 VDC 660 mA Current Draw at 24 VDC 90 mA Isolation Voltage Rating 30 V continuous Mounting Method DIN rail or panel mount Enclosure Type Open-style EtherNet/IP and CompactLogix Controller Features The 1769-L35E uses CompactLogix backplane bus communication to coordinate controller operations and connected I/O modules. Furthermore, the Ethernet interface supports data exchange between the controller and EtherNet/IP networks for industrial control applications. The controller supports I/O density scaling through a maximum configuration of 30 Compact I/O modules distributed across up to 3 I/O banks. In addition, the controller provides 1.5 MB user memory for application programs, controller tags, and execution data. The integrated communication ports include an Ethernet port and an RS-232 serial port. Therefore, the controller can exchange data with network devices and serial equipment within compatible automation architectures. Frequently Asked Questions Q: How many Compact I/O modules can the 1769-L35E controller support?A: The 1769-L35E supports up to 30 Compact I/O modules with a maximum of 3 I/O banks. Q: What communication interfaces are available on the 1769-L35E?A: The controller provides 1 Ethernet port and 1 RS-232 serial port for network and serial communication. Q: Can the 1769-L35E use a CompactFlash memory card?A: Yes. The controller supports the 1784-CF128 CompactFlash card for compatible storage functions. Field Installation Guidelines Install the 1769-L35E on a suitable DIN rail or panel mounting surface according to the controller installation requirements. Maintain proper separation between communication wiring, power conductors, and high-voltage sources to reduce electrical interference. Connect cable shields according to the system grounding design and maintain correct grounding practices for the control cabinet. Verify the 5 VDC and 24 VDC power supply loading before installation. The controller current requirements must remain within the available power supply capacity of the CompactLogix system. Confirm Ethernet cable routing, connector condition, and network configuration before commissioning. Firmware compatibility should also be checked before replacing or upgrading controller hardware.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-L32E CompactLogix Programmable Automation Controller
Allen Bradley 1769-L32E CompactLogix Programmable Automation Controller Configured for programmable control execution in CompactLogix systems, the Allen Bradley 1769-L32E (1769-L32E Programmable Automation Controller) provides direct processor control and EtherNet communication functions for industrial I/O architectures. Hardware Specifications Parameter Specification Model 1769-L32E Brand Allen Bradley Product Type Programmable Automation Controller Product Line CompactLogix Origin USA Weight 0.75 lb (0.34 kg) Power Consumption 2.61 W User Memory 512 KB Maximum I/O Modules Supported 16 Maximum I/O Banks Supported 3 Backplane Current 330 mA at 5 VDC; 40 mA at 24 VDC Power Supply Distance Rating 4 Isolation Voltage 30 V continuous Compatible Battery 1769-BA Compatible Programming Cable 1747-CP3 or 1756-CP3 Enclosure Type Open-style EtherNet/IP and CompactLogix Control Architecture The 1769-L32E controller operates within the CompactLogix platform and manages local I/O communication through the backplane bus. It supports I/O density scaling with up to 16 Compact I/O modules and three I/O banks. Additionally, the controller uses EtherNet communication capability for system integration and controller-to-device data exchange. The controller requires controlled firmware compatibility when users perform system upgrades. Therefore, engineers should verify controller revision levels, programming software compatibility, and network configuration before firmware replacement or application migration. Frequently Asked Questions Q: How many Compact I/O modules can the 1769-L32E support?A: The controller supports a maximum of 16 I/O modules distributed across up to three I/O banks. Q: What backplane current load does the 1769-L32E require?A: The controller consumes 330 mA at 5 VDC and 40 mA at 24 VDC from the backplane power supply. Q: Can the 1769-L32E use any CompactLogix battery module?A: The specified compatible battery module is the 1769-BA. Engineers should verify replacement compatibility before installation. Field Installation Guidelines Install the 1769-L32E in an open-style industrial enclosure that provides mechanical protection and controlled environmental conditions. Before wiring, confirm the backplane power capacity and calculate the total current consumption of all connected Compact I/O modules. Maintain proper grounding practices and separate controller communication wiring from high-voltage power conductors to reduce electrical interference. During installation, verify the programming cable type and controller communication settings. Use approved configuration tools to load firmware and application programs according to the controller revision requirements.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-OF2 CompactLogix Analog Output Module
Allen Bradley 1769-OF2 CompactLogix Analog Output Module Configured for analog signal execution in CompactLogix EtherNet/IP control systems, the Allen Bradley 1769-OF2 (1769-OF2 Analog Output Module) provides direct physical/electrical output control through two configurable analog channels. Hardware Specifications Parameter Specification Model 1769-OF2 Brand Allen Bradley Origin USA Product Type Analog Output Module Product Line CompactLogix Weight 0.63 lbs (0.28 kg) Power Consumption 2.63 Total Watts Output Type Analog Outputs Number of Outputs 2 Outputs Output Voltage Ratings -10 to 10 VDC, 0 to 10 VDC, 0 to 5 VDC, or 1 to 5 VDC Output Current Ratings 0 to 20 mA or 4 to 20 mA Converter Type Sigma-Delta Maximum Conversion Rate 2.5 ms for all channels Module Status LED Included Nameplate Label Included Bus Lever Locking function included Open Circuit Protection Included Short Circuit Protection Included Output Overvoltage Protection Included CompactLogix I/O Processing and Network Integration The 1769-OF2 uses CompactLogix backplane bus communication for controller-to-I/O data exchange. The module supports analog output scaling through configurable voltage and current ranges, allowing the controller to execute proportional control commands. Additionally, the sigma-delta converter architecture provides channel conversion processing with a maximum conversion rate of 2.5 ms for all channels. The module supports I/O density scaling within CompactLogix local expansion assemblies while maintaining direct analog signal handling. Frequently Asked Questions Q: What output signals does the 1769-OF2 support?A: The module supports voltage outputs of -10 to 10 VDC, 0 to 10 VDC, 0 to 5 VDC, and 1 to 5 VDC. It also supports current outputs of 0 to 20 mA and 4 to 20 mA. Q: Does the 1769-OF2 include protection functions?A: Yes. The module includes open circuit protection, short circuit protection, and output overvoltage protection for analog output channels. Q: What conversion method does the module use?A: The 1769-OF2 uses a sigma-delta converter and provides a maximum conversion rate of 2.5 ms for all channels. Field Installation Guidelines Install the 1769-OF2 within the CompactLogix system according to the controller and I/O assembly configuration requirements. Use shielded signal wiring for analog connections to reduce electrical interference. Connect cable shields according to the plant grounding standard and separate analog signal wiring from high-voltage power conductors. Verify the selected output range before commissioning. Confirm that the connected field device matches the configured voltage or current signal type. Inspect terminal connections, module seating, and bus lever locking status before applying system power.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-L33ER CompactLogix Programmable Automation Controller
Allen Bradley 1769-L33ER CompactLogix Programmable Automation Controller The Allen Bradley 1769-L33ER, also cataloged as the 1769-L33ER Programmable Automation Controller, operates as a dedicated hardware component for executing logic processing and EtherNet/IP communication tasks within CompactLogix control platforms. Hardware Specifications Parameter Specification Model 1769-L33ER Brand Allen Bradley Origin USA Product Type Programmable Automation Controller Product Line CompactLogix Weight 0.45 kg (1.00 lbs) Operating Temp 0 to 60 deg C Power Consumption Not specified by manufacturer Local Modules Supported Up to 16 modules Expansion Banks Supported 2 banks Memory Capacity 2 MB Communication Ports 1 USB port and 1 Ethernet port Supported Protocol EtherNet/IP Tasks 32 tasks Programs per Task 100 programs Mounting Options DIN rail mounting and panel mounting Vibration Rating Operating: 10 to 500 Hz; 0.030 in. peak-to-peak EtherNet/IP and CompactLogix Control Architecture The 1769-L33ER controller uses the CompactLogix backplane communication structure to exchange data with local I/O modules. It supports EtherNet/IP communication through the integrated Ethernet interface, while the USB port provides local programming and diagnostic access. Furthermore, the controller supports modular I/O density scaling with up to 16 local modules and two expansion banks. The architecture allows engineers to configure distributed control systems while maintaining direct processor access to connected modules. The controller provides firmware compatibility within the CompactLogix platform and manages application execution through a structured task and program organization. It supports deterministic EtherNet/IP networks for industrial control communication between controllers, I/O devices, and automation components. Frequently Asked Questions Q: Does the 1769-L33ER support hot-swapping of connected I/O modules?A: No. The controller does not support hot-swapping of CompactLogix I/O modules. Power must be removed before installing or removing hardware components. Q: What communication interfaces are integrated into the 1769-L33ER?A: The controller includes one Ethernet port for EtherNet/IP communication and one USB port for local programming and maintenance operations. Q: How does the controller manage application execution?A: The 1769-L33ER manages control logic through up to 32 tasks, with each task supporting up to 100 programs. Field Installation Guidelines Install the 1769-L33ER on a properly grounded DIN rail or panel mounting surface according to CompactLogix installation requirements. Maintain correct module alignment when connecting local I/O modules to the controller. Verify that the backplane connection is fully engaged before applying system power. Route Ethernet communication cables separately from high-voltage power wiring to reduce electromagnetic interference. Use proper cable shielding and grounding practices for industrial Ethernet networks. Before commissioning, verify firmware compatibility between the controller, connected I/O modules, and engineering software environment. Confirm network addressing and EtherNet/IP communication parameters before placing the control system into operation.
$200.00 $100.00
-
Allen Bradley Allen Bradley 1769-SM1 CompactLogix DPI/Scanport Communication Module
Allen Bradley 1769-SM1 CompactLogix DPI/Scanport Communication Module The Allen Bradley 1769-SM1, also cataloged as the 1769-SM1 DPI/Scanport Communication Module, operates as a dedicated hardware component for drive communication within CompactLogix controller platforms. Hardware Specifications Parameter Specification Model 1769-SM1 Brand Allen Bradley Origin United States Product Type DPI/Scanport Communication Module Product Line CompactLogix Series A and B Weight 0.19 lbs (0.09 kg) Power Supply Distance Rating 8 Modules Communication Interface DPI/Scanport Wire Type Copper-90 Solid Wire Size 22-14 AWG Stranded Wire Size 22-16 AWG UPC 820919088001 Industrial Control Communication Integration The 1769-SM1 module provides DPI and Scanport communication capability for CompactLogix systems. It connects controller platforms with compatible Allen Bradley drive products through the designated communication interface. Therefore, the module enables data exchange between the controller application and connected drive equipment. The CompactLogix backplane communication structure manages module interaction inside the I/O assembly. Additionally, the module supports system expansion planning through its 8-module power supply distance rating, allowing engineers to define module placement within the controller rack configuration. The module belongs to the Allen Bradley industrial control platform category, where backplane bus communication velocity, I/O density scaling, and firmware compatibility influence overall system configuration. Consequently, engineers should verify controller firmware and communication requirements before installation. Frequently Asked Questions Q: What communication protocol does the 1769-SM1 module support?A: The 1769-SM1 supports DPI and Scanport communication interfaces for connection with compatible Allen Bradley drive equipment. Q: How many modules can be installed within the power supply distance rating?A: The module has a power supply distance rating of 8 modules. The installation layout must maintain the CompactLogix system configuration limits. Q: What wire sizes are accepted by the terminal connections?A: The module accepts solid wire sizes from 22 to 14 AWG and stranded wire sizes from 22 to 16 AWG with copper conductors. Field Installation Guidelines Install the 1769-SM1 module according to the CompactLogix system installation requirements. Confirm the controller power state before mounting or removing the module from the system assembly. Use copper conductors that match the specified wire ranges. Maintain proper cable routing practices and separate communication wiring from high-voltage power conductors to reduce electrical interference. Connect the communication cable with correct shielding and grounding practices according to the drive and controller installation manuals. Verify module seating, terminal connections, and network communication status after installation. Before commissioning, confirm controller firmware compatibility, communication parameters, and connected drive configuration settings.
$200.00 $100.00
لقد شاهدت 48 من أصل 62 منتجًا