Jelajahi rangkaian lengkap produk otomasi industri dari merek-merek ternama seperti ABB, Bently, Honeywell, GE, dan lainnya. IndustriaX Limited membantu produsen mendapatkan komponen langka dan sulit ditemukan di seluruh dunia dengan pengiriman cepat untuk meminimalkan waktu henti.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB805 3BSE008534R1 Modulebus Extension Cable Adaptor
Configured for Modulebus extension cable connection in ABB System 800xA and S800 I/O networks, the ABB TB805 3BSE008534R1 (TB805 Modulebus extension cable adaptor) provides direct physical interface conversion through a D-sub 25 female connector for TK801 extension cables.
Hardware Specifications
Parameter
Specification
Model
TB805 3BSE008534R1
Brand
ABB
Product Type
Modulebus Extension Cable Adaptor
Origin
Not specified in provided data
Weight
0.046 kg
Dimensions
25 mm depth x 109 mm height x 22 mm width
Operating Temp
Not specified in provided data
Power Consumption
Passive component, no external power consumption
Connector Type
D-sub 25 female
Compatible Cable
TK801 Modulebus extension cable
Product Function
Modulebus outlet and extension cable interface adapter
Product Category
Module_Termination_Unit
RoHS Status
Following EU Directive 2011/65/EU
WEEE Category
5. Small Equipment (No External Dimension More Than 50 cm)
Backplane Bus and Industrial Network Interface
The ABB TB805 belongs to the ABB S800 I/O Modulebus accessory family and provides a physical connection point for extending Modulebus communication paths. Therefore, the adaptor maintains the required mechanical alignment between the controller-side interface and external TK801 extension cables.
The TB805 uses a passive signal routing structure without internal processing firmware. Consequently, it does not modify communication data or require configuration parameters. The component supports ABB industrial control architectures where I/O density scaling and backplane bus communication velocity management are handled by the active controller and I/O modules.
The D-sub 25 female interface provides a defined electrical connection point. Additionally, correct cable shielding and grounding practices help maintain signal integrity in industrial environments.
Frequently Asked Questions
Q: Does the TB805 require an external power supply?A: No. The TB805 is a passive Modulebus extension cable adaptor and does not require external power input.
Q: What cable connects to the TB805 interface?A: The TB805 is designed for use with the ABB TK801 Modulebus extension cable through its D-sub 25 female connector interface.
Q: Does the TB805 contain firmware or communication configuration settings?A: No. The TB805 is a hardware adaptor without firmware functions or user-configurable parameters.
Field Installation Guidelines
Install the TB805 according to ABB S800 I/O system installation procedures. Verify that the D-sub 25 connector is fully seated and mechanically secured before system operation.
Route the TK801 extension cable separately from high-voltage power wiring and high-current switching conductors. Maintain proper cable bending radius and avoid excessive mechanical stress on the connector assembly.
Connect cable shielding according to the system grounding design. Confirm that all Modulebus extension connections are correctly installed before applying power to the associated ABB control system.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB806 3BSE008536R1 ModuleBus Extension Cable Adaptor
Configured for ModuleBus signal extension connection in ABB S800 I/O systems, the ABB TB806 3BSE008536R1 (TB806 ModuleBus Extension Cable Adaptor) provides direct physical interface adaptation between ModuleBus segments through a D-SUB 25 male connector.
Hardware Specifications
Parameter
Specification
Model
TB806 3BSE008536R1
Brand
ABB
Product Type
ModuleBus Extension Cable Adaptor
Origin
Sweden
Weight
0.1 kg
Dimensions
12.7 x 5.1 x 5.1 cm
Operating Temp
0 to +55 deg C
Storage Temperature
-25 to +70 deg C
Humidity Range
RH 5 to 95 %
Power Consumption
Passive interface component, no external power supply required
Mechanics
S800
Connector Type
D-SUB 25 male
Tariff Code
8537101190
Hazardous Location
C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
Marine Certification
ABS, BV, DNV, LR
Pollution Degree
Degree 2, IEC 60664-1
Corrosion Protection
ISA-S71.04: G3
ABB S800 ModuleBus Interface Characteristics
The TB806 operates as a passive ModuleBus interface adapter within ABB S800 I/O configurations. Therefore, it supports physical connection extension between compatible ModuleBus components while maintaining the electrical characteristics of the communication path.
In addition, ABB S800 architecture depends on defined backplane and ModuleBus communication structures. The TB806 provides the required connector conversion function without adding firmware processing or active communication control.
Furthermore, the adaptor supports industrial installation requirements with specified hazardous location approvals and environmental protection classifications. The unit maintains compatibility with ABB ModuleBus extension arrangements where D-SUB 25 male interfaces are required.
Frequently Asked Questions
Q: Does the ABB TB806 3BSE008536R1 require an external power supply?A: No. The TB806 is a passive ModuleBus extension cable adaptor and does not require an independent power input.
Q: What connector interface does the TB806 provide?A: The TB806 provides a D-SUB 25 male connector interface for ModuleBus extension connection within ABB S800 configurations.
Q: Can the TB806 be installed in hazardous areas?A: Yes. The listed certifications include C1 Div 2 cULus, C1 Zone 2 cULus, and ATEX Zone 2 approval classifications.
Field Installation Guidelines
Install the TB806 according to ABB S800 ModuleBus system documentation and approved wiring practices.
Verify connector orientation before inserting the D-SUB interface to prevent mechanical damage.
Maintain proper cable routing and separate ModuleBus wiring from high-voltage power conductors.
Use appropriate shielding and grounding methods according to the installation environment.
Confirm environmental conditions remain within the specified operating temperature and humidity limits.
Inspect connectors for contamination, corrosion, or mechanical stress before system commissioning.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB850 3BSC950193R1 CEX-Bus Terminator
The ABB TB850 3BSC950193R1, also cataloged as the TB850 CEX-Bus Terminator, provides direct electrical termination for CEX-Bus communication networks in ABB industrial control platforms. It applies a 120 ohm termination resistance through a 25-pin DB25P male connector interface to maintain bus signal integrity.
Hardware Specifications
Parameter
Specification
Model
TB850 3BSC950193R1
Brand
ABB
Product Type
CEX-Bus Terminator
Origin
Sweden
Weight
0.05 kg
Dimensions
6.5 x 2.5 x 4.2 cm
Operating Temp
-25 deg C to +70 deg C
Storage Temp
-40 deg C to +85 deg C
Power Consumption
Passive termination device, no external power required
Bus Interface
CEX-Bus
Termination Resistance
120 ohm
Bus Voltage
5 VDC
Connector Type
25-pin DB25P male connector
Cable Interface
9-pin D-sub connector or terminal block compatible interface
Humidity
5-95% RH, non-condensing
Pollution Degree
2
Tariff Code
8537101190
ABB Industrial Control Bus Signal Termination
The ABB TB850 supports CEX-Bus communication stability by providing the required end-of-line termination resistance. Therefore, the module reduces signal reflections on the communication line and maintains correct electrical characteristics across connected CEX-Bus segments.
For ABB PLC and DCS configurations, CEX-Bus communication depends on correct termination placement. The TB850 installs at the designated bus endpoint and works as a passive electrical component without firmware configuration or parameter settings.
Additionally, ABB control system installations require correct connector seating and cable routing to maintain communication performance. The termination resistor directly matches the bus impedance requirement of 120 ohm.
Frequently Asked Questions
Q: What is the primary function of the ABB TB850 3BSC950193R1?A: The TB850 functions as a CEX-Bus terminator by providing a 120 ohm termination resistance at the communication bus endpoint.
Q: Does the TB850 require external power or firmware configuration?A: No. The TB850 is a passive termination component and does not require external power, firmware loading, or software configuration.
Q: What installation consideration applies to the TB850 connection?A: The installer should place the terminator at the correct CEX-Bus endpoint and verify proper connector engagement and cable shielding practices.
Field Installation Guidelines
Install the TB850 only at the specified CEX-Bus termination position within the ABB control system configuration.
Verify that the communication cable connection is fully seated before system startup.
Maintain proper cable separation from high-voltage power wiring to reduce electromagnetic interference.
Connect cable shields according to the ABB system grounding specification.
Avoid mechanical stress on the DB25 connector during installation and maintenance operations.
Confirm bus continuity and termination resistance before commissioning the communication network.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB846 3BSE021439R1 Dual Modulebus Inlet Module
Configured for redundant ModuleBus cable adaptation in ABB S800 I/O systems, the ABB TB846 3BSE021439R1 (TB846 Dual Modulebus Inlet Module) provides direct physical connection and signal routing between redundant ModuleBus communication paths.
Hardware Specifications
Parameter
Specification
Model
TB846 3BSE021439R1
Brand
ABB
Product Type
Dual Modulebus Inlet Module
Article Number
3BSE021439R1
Spare Model
TB846
System Platform
ABB S800 I/O
Function
Redundant ModuleBus Cable Adaptor
Data Rate
1 Mbit/s
Origin
Sweden
Weight
0.04 kg
Dimensions
1.6 x 5.4 x 5.6 cm
Operating Temp
-20 deg C to +70 deg C
Storage Temp
-40 deg C to +85 deg C
Humidity
5 - 95 % RH, non-condensing
Mechanics
S800
ABB S800 ModuleBus Communication Interface
The TB846 operates as a passive communication interface component within the ABB S800 I/O architecture. It manages redundant ModuleBus cable connections and supports communication transfer at a 1 Mbit/s data rate.
Additionally, the module supports ABB backplane bus communication velocity management within S800 I/O configurations. The hardware design enables I/O density scaling by allowing redundant communication paths between connected S800 components.
The TB846 uses the S800 mechanical design format and maintains electrical separation between ModuleBus connection paths. Therefore, installation practices must maintain proper cable routing and grounding according to ABB system documentation.
Frequently Asked Questions
Q: What is the primary function of the ABB TB846 module?A: The TB846 functions as a Dual Modulebus Inlet Module and provides redundant ModuleBus cable adaptation for ABB S800 I/O systems.
Q: Does the TB846 contain active processing functions?A: No. The TB846 is a communication interface component and does not operate as a CPU or signal processing module.
Q: What environmental conditions support TB846 installation?A: The module operates from -20 deg C to +70 deg C and supports 5 - 95 % RH non-condensing humidity conditions.
Field Installation Guidelines
Install the TB846 according to ABB S800 system installation procedures. Verify that ModuleBus cables are correctly seated and mechanically secured before system startup.
Keep communication cables separated from high-voltage power wiring to reduce electromagnetic interference. Connect cable shielding according to the applicable ABB grounding recommendations.
Before replacing or installing the module, confirm system power status and verify the permitted hot-swap conditions of the connected S800 configuration.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB852 RCU Link Terminator
Configured for RCU link termination in ABB Advant Controller and System 800xA platforms, the ABB TB852 3BSC950263R1 (TB852 RCU Link Terminator) provides direct physical termination for redundant control unit communication links.
Hardware Specifications
Parameter
Specification
Model
TB852
Brand
ABB
Product Type
RCU Link Terminator
Product ID
3BSC950263R1
Origin
Global ABB supply chain
Weight
0.02 kg
Dimensions
23 mm width x 20 mm height x 57 mm depth
Power Consumption
Passive component, no external power consumption
Communication Function
RCU link signal termination
Application Platform
ABB Advant Controller / System 800xA environments
HS Code
85369095 / 853690
Industrial Control Bus Termination Characteristics
The TB852 is a passive termination component designed for ABB redundant control communication networks. It terminates the RCU link electrical path and reduces signal reflection at the communication endpoint.
Furthermore, the component supports stable data transmission by maintaining the correct termination state of the RCU communication circuit. ABB industrial control architectures use this type of termination hardware to preserve communication quality between redundant processing units and associated control modules.
For ABB PLC and DCS installations, proper backplane bus communication velocity management and I/O density scaling depend on correct physical network configuration. Therefore, TB852 installation must follow the controller hardware topology requirements defined for the specific ABB control system.
Frequently Asked Questions
Q: What is the primary function of ABB TB852 3BSC950263R1?A: The TB852 functions as an RCU Link Terminator. It provides endpoint termination for the ABB RCU communication link and maintains proper electrical signal conditions.
Q: Does the TB852 require an external power supply?A: No. The TB852 is a passive termination component and does not require an external power connection.
Q: Can the TB852 be installed in any ABB control network position?A: No. The TB852 must be installed at the designated termination point of the RCU link according to the ABB system hardware configuration.
Field Installation Guidelines
Install the TB852 only at the specified RCU link termination position within the ABB control architecture.
Verify that the communication cable routing matches the ABB controller installation documentation.
Maintain separation between communication wiring and high-voltage power cables to reduce electrical interference.
Confirm connector seating and mechanical fixation before system startup.
Follow ABB grounding and shielding practices for connected communication cables.
Do not modify the passive termination circuitry or replace the component with non-approved termination devices.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB815 3BSE013204R1 Interconnection Unit
Configured for ModuleBus interconnection and termination functions in ABB Advant Master Process Control System platforms, the ABB TB815 3BSE013204R1 (TB815 Interconnection Unit) provides direct physical connection between ModuleBus segments with an integrated TB807 ModuleBus Terminator.
Hardware Specifications
Parameter
Specification
Model
TB815 3BSE013204R1
Brand
ABB
Product Type
I-O Module / Interconnection Unit
Origin
Sweden
Weight
0.25 kg
Dimensions
90 mm depth x 250 mm height x 50 mm width
Power Consumption
Passive interconnection component, no external power consumption specified
Included Components
1 pc TB815 Interconnection Unit and 1 pc TB807 ModuleBus Terminator
ModuleBus Function
Physical interconnection and termination of ModuleBus communication lines
Product Family
ABB Advant Master Process Control System
RoHS Status
Exempted according to EU Directive 2011/65/EU Article 2(4)(c), (e), (f), and (j)
ABB Industrial Control Bus Integration
The TB815 operates as a passive ModuleBus interconnection component within ABB industrial control architectures. It connects ModuleBus sections and maintains the required termination arrangement through the included TB807 ModuleBus Terminator.
Furthermore, ABB ModuleBus designs use controlled communication paths between I/O units and controller interfaces. Therefore, correct installation of the TB815 supports stable backplane bus communication velocity and proper I/O density scaling within compatible ABB S800 and Advant control configurations.
The unit does not provide signal processing, firmware execution, or field signal conversion. Instead, it performs physical network arrangement functions between ModuleBus components.
Frequently Asked Questions
Q: What components are included with the ABB TB815 3BSE013204R1?A: The assembly includes one TB815 Interconnection Unit and one TB807 ModuleBus Terminator.
Q: Does the TB815 require an external power supply?A: No. The TB815 is a passive interconnection component and does not require an external power connection.
Q: What communication function does the TB815 provide in an ABB system?A: The TB815 provides physical ModuleBus interconnection and termination functions for compatible ABB control system configurations.
Field Installation Guidelines
Install the TB815 according to ABB system configuration drawings and ModuleBus installation instructions.
Verify that the included TB807 ModuleBus Terminator is installed in the designated termination position.
Keep ModuleBus wiring separated from high-voltage power cables to reduce electromagnetic interference.
Maintain proper cable routing and grounding practices according to ABB industrial control cabinet standards.
Inspect connector alignment before mounting the unit to prevent mechanical damage.
Confirm ModuleBus communication integrity after installation through the system diagnostic functions.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB807 Modulebus Terminator
The ABB 3BSE008538R1, also cataloged as the TB807 Modulebus Terminator, operates as a passive termination unit for completing Modulebus communication lines within ABB S800 I/O system configurations.
Hardware Specifications
Parameter
Specification
Model
TB807 3BSE008538R1
Brand
ABB
Product Type
Modulebus Termination Unit
Origin
Sweden
Weight
10 g
Dimensions
Width: 17 mm; Depth: 13 mm; Height: 19 mm
Operating Temp
0 to +55 deg C
Storage Temperature
-25 to +70 deg C
Power Consumption
Passive unit, no external power consumption
Mechanical Platform
S800
Protection Class
IP20 according to IEC 60529
Pollution Degree
Degree 2 according to IEC 60664-1
Electrical Safety
IEC 61131-2, UL 61010-1, UL 61010-2-201
EMC Compliance
EN 61000-6-4 and EN 61000-6-2
Corrosion Protection
ISA-S71.04: G3
RoHS Compliance
EU RoHS, UAE RoHS, CN RoHS
WEEE Compliance
Directive 2012/19/EU
Hazardous Location Certification
C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
Marine Certification
ABS, BV, DNV, LR
Modulebus Termination Function
The ABB TB807 provides physical termination for the S800 Modulebus network. The unit completes the communication bus structure by applying the required termination impedance at the end of the Modulebus segment. Therefore, it prevents signal reflections and maintains correct bus electrical characteristics.
The TB807 uses a passive design without active electronics or external power input. Additionally, its compact S800 mechanical format supports installation within ABB I/O assemblies where space requirements apply.
Frequently Asked Questions
Q: What is the primary function of the ABB TB807?A: The TB807 functions as a passive Modulebus termination unit. It terminates the end of an S800 Modulebus segment and maintains proper bus signal conditions.
Q: Does the TB807 require a power supply connection?A: No. The TB807 is a passive component and does not require external power or firmware configuration.
Q: Which ABB system platform uses the TB807?A: The TB807 belongs to the ABB S800 mechanical platform and is designed for Modulebus termination applications.
Field Installation Guidelines
Install the TB807 at the designated end position of the Modulebus communication segment according to ABB system configuration requirements.
Verify that the termination unit is installed securely within the S800 hardware assembly.
Maintain proper cable routing and avoid parallel installation with high-current power conductors to reduce electromagnetic interference.
Follow ABB grounding and shielding practices for Modulebus cable installations.
Confirm that environmental conditions remain within the specified operating temperature, humidity, and protection class limits.
Inspect mechanical connections during commissioning to ensure correct physical placement and bus continuity.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB511-ETH AC500 V2 Terminal Base
Configured for Ethernet and serial communication module integration in AC500 V2 PLC systems, the ABB TB511-ETH (TB511-ETH Terminal Base) provides physical connection support for communication interfaces including Ethernet, RS232, and RS485 within ABB AC500 V2 platforms.
Hardware Specifications
Parameter
Specification
Model
TB511-ETH
Brand
ABB
Origin
Sweden
Product Type
Terminal Base
System Platform
ABB AC500 V2
Communication Interfaces
Ethernet, 2 x serial interfaces RS232/RS485
Communication Connector Type
D-SUB, RJ45, Terminals
Communication Module Slot
1 slot
Supply Voltage
24 V DC
Input Voltage Type
DC
Degree of Protection
IP20
Operating Temp
0 to +60 deg C
Storage Temperature
-40 to +70 deg C
Weight
0.159 kg
Dimensions
28 x 135 x 95.5 mm
PLC Communication Interface Integration
The ABB TB511-ETH provides an AC500 V2 terminal base structure with integrated communication interfaces. It supports one communication module slot and combines Ethernet networking with two serial channels based on RS232/RS485 electrical standards.
Furthermore, the terminal base supports deterministic PLC communication expansion through ABB AC500 V2 architecture. The design follows industrial PLC backplane communication requirements and enables I/O density scaling within modular controller configurations.
The TB511-ETH operates with 24 V DC supply input and maintains IP20 protection for cabinet-based installations. Its Ethernet interface and serial communication ports allow connection between AC500 V2 controllers and external automation devices.
Frequently Asked Questions
Q: What communication interfaces are available on the ABB TB511-ETH?
A: The TB511-ETH provides one Ethernet interface and two serial interfaces supporting RS232 and RS485 communication through D-SUB, RJ45, and terminal connections.
Q: Can the TB511-ETH operate outside the AC500 V2 platform?
A: The TB511-ETH is designed specifically for ABB AC500 V2 systems and provides the mechanical and electrical interface required by this controller platform.
Q: What environmental conditions are specified for TB511-ETH operation?
A: The module supports operation from 0 to +60 deg C and storage from -40 to +70 deg C according to ABB technical specifications.
Field Installation Guidelines
Install the TB511-ETH on a compatible ABB AC500 V2 controller assembly according to the system hardware configuration.
Verify the 24 V DC supply wiring polarity before applying power.
Connect Ethernet cables separately from high-voltage power conductors to reduce electromagnetic interference.
Route RS232/RS485 communication wiring with appropriate shielding and grounding practices.
Confirm terminal connections and connector seating before system commissioning.
Maintain cabinet airflow requirements within the specified operating temperature range.
Follow ABB AC500 V2 installation documentation for communication module configuration and firmware compatibility.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB842 ModuleBus Optical Port
The ABB TB842 3BSE022464R1, also cataloged as the TB842 ModuleBus Optical Port, provides fiber optic communication between CI801 or CI840/CI840A FCI modules and TB820/TB820V2/TB840/TB840A ModuleBus modems within Optical ModuleBus networks.
Hardware Specifications
Parameter
Specification
Model
TB842 3BSE022464R1
Brand
ABB
Product Type
ModuleBus Optical Port
Communication Protocol
ModuleBus
Origin
Sweden
Weight
90 g
Dimensions
Width 17.6 mm, Height 56.7 mm, Depth 42.3 mm
Operating Temp
0 to +55 deg C
Storage Temp
-40 to +70 deg C
Power Consumption
0.5 W power dissipation, 20 mA typical 24 VDC consumption
ModuleBus Interface
Fiber optic interface with one transmit and one receive connection
Communication Speed
Maximum 10 Mbit/s
Optical Wavelength
650 nm
Optical Connector Type
Agilent, former Hewlett-Packard, Versatile Link
Optical Fiber Support
Plastic fiber and HCS (Hard Clad Silica) fiber
Line Redundancy
Supported
Module Redundancy
Supported
Hot Swap
Supported
Mounting Position
Vertical or horizontal
Protection Class
IP20 according to IEC 60529
Equipment Class
Class I according to IEC 60536
Humidity Range
5 to 95 %, non-condensing
CE Marking
Yes
Safety Standards
EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
Hazardous Location Approval
cULus Hazardous Location Class 1 Zone 2, ATEX Zone 2
Marine Certifications
ABS, BV, DNV-GL, LR
RoHS Compliance
EU RoHS, UAE RoHS, CN RoHS
WEEE Compliance
DIRECTIVE/2012/19/EU
ABB Optical ModuleBus Communication Interface
The TB842 operates as an optical communication node within ABB ModuleBus architectures. It connects CI801 FCI modules through TB806 and interfaces with CI840/CI840A FCI modules through TU847 and TB806 for single I/O configurations. For redundant I/O configurations, it connects through TU846 and TB846.
The module supports both simplex and duplex optical configurations. In simplex operation, optical ModuleBus nodes form a ring structure. In duplex operation, nodes connect in a linear arrangement. Therefore, the TB842 configuration depends on the required network topology and redundancy design.
The optical transmitter and receiver support communication rates up to 10 Mbit/s. Additionally, each ModuleBus network must use identical transmitter and receiver types across all connected nodes to maintain communication compatibility.
For ABB industrial control systems, the TB842 supports backplane bus communication velocity requirements and I/O density scaling by extending optical ModuleBus connectivity between distributed I/O components and communication interface modules.
Frequently Asked Questions
Q: What optical fiber types can the ABB TB842 support?A: The TB842 supports plastic optical fiber and HCS (Hard Clad Silica) optical fiber using Agilent, former Hewlett-Packard, Versatile Link connectors. The complete ModuleBus network must use the same transmitter and receiver type.
Q: Can the TB842 operate in redundant ModuleBus configurations?A: Yes. The TB842 supports both line redundancy and module redundancy. It can operate in simplex optical ring configurations and duplex optical row configurations according to system architecture requirements.
Q: What is the maximum communication speed of the TB842?A: The TB842 optical interface supports a maximum communication speed of 10 Mbit/s with a 650 nm optical wavelength.
Field Installation Guidelines
Install the TB842 on an ABB-compatible mounting assembly in either vertical or horizontal orientation according to cabinet design requirements.
Verify that the selected optical fiber type matches all connected ModuleBus nodes before commissioning. The optical transmitter and receiver types must remain consistent throughout the network.
Route fiber optic cables separately from high-voltage power wiring and strong electromagnetic interference sources. Maintain proper bending radius limits specified by the selected fiber manufacturer.
Check all Versatile Link optical connectors for correct alignment and clean optical surfaces before connection. Contamination on optical interfaces can reduce signal quality.
Confirm 24 VDC power wiring polarity before energizing the module. Use appropriate grounding practices for the cabinet and connected ABB control equipment.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB820 ModuleBus Modem
The ABB 3BSE008555R1, also cataloged as the TB820 ModuleBus Modem, operates as a dedicated communication interface component for ModuleBus signal transmission and expansion within ABB Advant OCS and AC 400 system architectures.
Hardware Specifications
Parameter
Specification
Model
TB820
Brand
ABB
Origin
Sweden
Power Consumption
Supplied through system rack or ModuleBus interface
Product Type
ModuleBus Modem / Interface Unit
Part Number
3BSE008555R1
Communication Function
ModuleBus communication extension and interface
System Compatibility
ABB Advant OCS / AC 400 control systems
Mounting Method
DIN rail or rack mounting depending on system configuration
Signal Interface
Electrical or optical ModuleBus communication interface
Backplane Bus Communication and I/O Expansion Characteristics
The ABB TB820 uses the ABB ModuleBus architecture to transfer communication signals between controller assemblies and connected I/O units. Therefore, the unit provides a physical interface for extending ModuleBus communication paths within compatible ABB control platforms.
The module supports structured communication between system nodes and maintains ModuleBus signal integrity through the defined ABB hardware interface. In addition, the TB820 can be integrated into configurations requiring distributed I/O placement and controller-to-I/O communication extension.
The ABB industrial control platform design focuses on backplane bus communication velocity, deterministic data exchange, and I/O density scaling. However, TB820 specific firmware flash compatibility and communication parameters depend on the installed ABB system revision and hardware configuration.
Frequently Asked Questions
Q: What is the primary function of the ABB TB820 3BSE008555R1?A: The TB820 functions as a ModuleBus Modem that provides communication interfacing and expansion capability for ABB ModuleBus-based control systems.
Q: Can the TB820 operate as a standalone communication device?A: No. The TB820 requires integration with compatible ABB control hardware and ModuleBus system components for operation.
Q: Does the TB820 support optical ModuleBus communication?A: The TB820 is designed for ModuleBus communication extension. The exact optical or electrical interface capability depends on the connected ABB hardware configuration.
Field Installation Guidelines
Install the ABB TB820 according to the applicable ABB system installation manual and hardware configuration requirements.
Verify that the mounting position matches the specified rack or DIN rail arrangement before wiring.
Keep ModuleBus communication cables separated from high-voltage power conductors to reduce electrical interference.
Connect cable shielding and grounding according to ABB control cabinet grounding practices.
Check connector seating, module alignment, and system power conditions before commissioning.
Confirm controller recognition and ModuleBus communication status through the ABB engineering tool after installation.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB807 Modulebus Terminator
Configured for Modulebus line termination in ABB automation system networks, the ABB 3BSE008538R1 (TB807 Modulebus Terminator) provides direct physical termination for Modulebus communication segments. This hardware component maintains bus electrical conditions by completing the communication line structure.
Hardware Specifications
Parameter
Specification
Model
3BSE008538R1
ABB Type Designation
TB807
Product Type
Module Termination Unit
Brand
ABB
Origin
Bulgaria
Function
Modulebus Terminator
Communication Interface
Modulebus termination interface
Weight
0.01 kg
Dimensions
13 mm depth x 19 mm height x 17 mm width
Operating Temp
Not specified
Power Consumption
Passive termination component; no external power supply required
Cable Length
0 m
Modulebus Termination and Industrial Bus Control
The ABB TB807 terminates Modulebus communication paths within ABB control architectures. Therefore, it provides the required electrical endpoint for bus segments and supports correct signal behavior across connected modules.
The unit belongs to ABB Modulebus termination components and operates as a passive hardware element. Additionally, its compact mechanical design allows installation at designated Modulebus endpoint positions without additional wiring length.
The TB807 supports ABB industrial control platforms through direct Modulebus interface compatibility. Furthermore, its termination function contributes to stable backplane bus communication velocity and proper I/O density scaling within ABB distributed control configurations.
Frequently Asked Questions
Q: What is the primary function of the ABB TB807 3BSE008538R1?A: The TB807 functions as a Modulebus terminator. It completes the physical communication line and provides the required termination point for Modulebus segments.
Q: Does the TB807 require an external power connection?A: No. The TB807 is a passive termination component and does not require a separate power supply connection.
Q: Where should the TB807 be installed in a Modulebus configuration?A: The TB807 should be installed at the designated endpoint of the Modulebus communication path according to ABB system installation documentation.
Field Installation Guidelines
Install the TB807 only at the specified Modulebus termination position within the ABB control system configuration.
Verify that the module connector is fully seated before system commissioning.
Keep Modulebus wiring separated from high-voltage power cables to reduce electrical interference.
Follow ABB grounding and shielding practices for connected communication cables.
Inspect connector conditions and mechanical mounting points during maintenance activities.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB825 3BSE036634R1 Optical Media Converter
Configured for optical signal conversion in the ABB Modulebus network, the ABB TB825 3BSE036634R1 (TB825 Optical Media Converter) provides direct physical data transmission conversion between electrical and optical communication interfaces.
Hardware Specifications
Parameter
Specification
Model
TB825 3BSE036634R1
Brand
ABB
Product Type
Optical Media Converter
Origin
Sweden
Weight
0.2 kg
Dimensions
10.2 x 5.1 x 15.2 cm
Communication Protocol
Modulebus
Master or Slave
Slave
Line Redundancy
No
Power Supply
24 VDC
Power Consumption
96 mA typical at 24 VDC
Operating Temp
0 to +55 deg C (+32 to +131 deg F), approvals issued for +5 to +55 deg C
Storage Temp
-40 to +70 deg C (-40 to +158 deg F)
Relative Humidity
5 to 95 %, non-condensing
Hazardous Location Approval
C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
Marine Certificates
ABS, BV, DNV-GL, LR
Modulebus Optical Communication Conversion
The ABB TB825 3BSE036634R1 performs optical media conversion within ABB industrial control architectures using Modulebus communication. Therefore, the module transfers communication signals through optical interfaces to support extended network connections and electrical isolation between connected segments.
Additionally, the TB825 operates as a slave device on the Modulebus network. The module supports a 24 VDC power input with a typical current consumption of 96 mA and does not provide line redundancy functionality.
For ABB automation platforms, communication performance depends on the Modulebus configuration, connected controller capacity, and installed firmware compatibility. Furthermore, the optical conversion function helps separate communication segments where electrical signal transmission limitations exist.
Frequently Asked Questions
Q: What communication protocol does the ABB TB825 3BSE036634R1 support?A: The TB825 supports the ABB Modulebus communication protocol and operates as a slave device within the network structure.
Q: Does the TB825 provide redundant communication lines?A: No. The TB825 specification indicates that line redundancy is not supported.
Q: What power supply is required for the TB825 module?A: The TB825 requires a 24 VDC supply and consumes approximately 96 mA under typical operating conditions.
Field Installation Guidelines
Install the TB825 module according to the ABB system hardware configuration requirements.
Verify that the 24 VDC power supply polarity matches the module connection specification before energizing the unit.
Route optical communication cables separately from high-voltage power cables to reduce electromagnetic interference risks.
Maintain proper optical connector cleanliness because contamination can affect signal transmission quality.
Confirm hazardous location requirements before installation in classified areas.
Ensure the ambient temperature and humidity remain within the specified operating limits.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB SD821 Power Supply Device
The ABB SD821 3BSC610037R1, also cataloged as the SD821 Power Supply Device, operates as a dedicated hardware component for converting incoming AC power into regulated 24 VDC output within ABB industrial control system platforms.
Hardware Specifications
Parameter
Specification
Model
SD821
Brand
ABB
Origin
Sweden
Weight
0.44 kg
Dimensions
5 x 10.6 x 13 cm
Operating Temp
Not specified
Power Consumption
2.5 A output rating
Input Voltage
230 VAC
Output Voltage
24 VDC
Product Type
Power Supply Device
Spare Model
3BSC610037R1
Manufacturer Status
Discontinued by manufacturer
Industrial Control Power Conversion Characteristics
The ABB SD821 power supply device provides AC to DC conversion for ABB automation hardware installations. It accepts a 230 VAC input source and delivers a 24 VDC output supply for connected control components.
Furthermore, the SD821 supports ABB system power distribution requirements through regulated DC output. The module design aligns with industrial cabinet installation practices where stable DC voltage distribution supports PLC, DCS, and I/O hardware operation.
For ABB control platforms, power supply integration requires consideration of backplane bus communication velocity, I/O density scaling, and firmware flash compatibility across connected hardware modules. Therefore, engineers should verify system-level power requirements before installation or replacement.
Frequently Asked Questions
Q: What is the primary electrical function of the ABB SD821?A: The ABB SD821 converts a 230 VAC input supply into a 24 VDC output supply for industrial automation equipment.
Q: Can the SD821 be used as a direct replacement for another power supply module?A: Replacement selection requires verification of voltage rating, current capacity, mechanical dimensions, and ABB system compatibility.
Q: Does the SD821 support redundant power supply configuration?A: The provided technical data does not specify redundancy capability. System documentation should be checked before implementing parallel or backup power arrangements.
Field Installation Guidelines
Install the ABB SD821 inside a suitable industrial control cabinet with appropriate ventilation and mechanical support.
Connect the 230 VAC input wiring according to the applicable electrical installation standard. Verify polarity and grounding requirements on the 24 VDC output side before connecting field devices.
Keep AC input wiring separated from low-voltage DC signal cables to reduce electrical interference. Use proper grounding methods for cabinet assemblies and maintain clean cable routing around control modules.
Before energizing the system, confirm input voltage level, output voltage stability, and load requirements against the installed automation hardware specifications.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB SD822 3BSC610038R1 Power Supply Module
The ABB SD822 3BSC610038R1, also cataloged as the SD822 Power Supply Module, operates as a dedicated hardware component for AC to 24 VDC power conversion within ABB industrial control system platforms. It provides a 230 VAC input interface and a 5 A rated 24 VDC output supply for connected control equipment.
Hardware Specifications
Parameter
Specification
Model
SD822 3BSC610038R1
Brand
ABB
Product Type
Power Supply Module
Origin
Sweden
Weight
0.6 kg
Dimensions
6.3 x 10.5 x 13.1 cm
Input Voltage
230 VAC
Output Voltage
24 VDC
Output Current
5 A
Power Supply
100 - 120 VAC
Power Consumption
150 VA typical
Operating Temp
0 - +50 deg C
Storage Temp
-40 - +70 deg C
Humidity
5 - 95 % RH non-condensing
Tariff Code
8537101190
Industrial Control Power Integration
The ABB SD822 power supply module supports industrial control power distribution through regulated 24 VDC output conversion. Furthermore, the module design aligns with ABB PLC and DCS hardware environments where stable DC power is required for I/O assemblies, controllers, and auxiliary control circuits.
ABB system power architectures typically use modular power distribution methods with controlled load allocation. Therefore, correct installation requires verification of input voltage range, output polarity, grounding arrangement, and connected load requirements before energizing the module.
The module operates as a power conversion component rather than a communication device. It does not provide field signal processing, protocol conversion, or I/O channel management functions. Its primary function is supplying DC operating power to compatible automation hardware.
Frequently Asked Questions
Q: What is the primary function of the ABB SD822 3BSC610038R1 module?A: The SD822 3BSC610038R1 converts AC input power into a regulated 24 VDC output supply for ABB industrial automation equipment.
Q: Does the SD822 module provide communication or field signal interfaces?A: No. The SD822 is a power supply module and does not include communication ports, analog input channels, or digital I/O functions.
Q: What environmental conditions are specified for SD822 operation?A: The module supports an operating temperature range of 0 to +50 deg C and storage conditions from -40 to +70 deg C with 5 - 95 % RH non-condensing humidity.
Field Installation Guidelines
Install the SD822 module according to the applicable ABB system cabinet layout and mounting requirements.
Verify AC input wiring before connection to prevent incorrect voltage application.
Maintain correct polarity when connecting the 24 VDC output terminals to downstream equipment.
Connect protective grounding according to industrial electrical installation standards.
Separate power wiring from sensitive signal cables to reduce electrical interference.
Check terminal tightening conditions before system startup.
Confirm the connected load remains within the specified power supply capacity.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 2711-K3A17L1 is a PanelView 300 Standard Operator Terminal designed for industrial human-machine interface (HMI) applications. This compact unit features a 3-inch monochrome transflective LCD display with an integrated LED backlight, providing clear visibility in various lighting conditions. It is engineered for reliable performance in demanding environments, utilizing a keypad-based input method for precise operator control.Features
3-inch monochrome transflective LCD display with LED backlight.
Integrated keypad assembly featuring 8 function keys (F1 through F8), dedicated cursor keys, and numeric entry keys.
RS-232 (DF1) communication port for seamless integration with PLC controllers.
240 KB nonvolatile memory for application storage.
170 KB of dedicated application runtime memory.
Compact design suitable for space-constrained control panels.
Technical Specifications
Product Model
2711-K3A17L1
Product Line
PanelView 300
Input Power
18 to 32V DC (24V DC nominal)
Display Size
3 inches
Display Type
Monochrome Transflective LCD
Input Method
Keypad
Communication
RS-232 (DF1)
Nonvolatile Memory
240 KB
Application Runtime Memory
170 KB
Weight
0.56 kg
Installation Guidelines
Ensure the panel cutout is prepared according to the manufacturer's mounting template to maintain the integrity of the enclosure seal.
Use shielded communication cables for the RS-232 port to minimize electromagnetic interference (EMI).
Verify that the power supply provides a stable 24V DC source within the 18-32V DC range before connecting.
Ensure proper grounding of the terminal chassis to a common earth ground to prevent electrical noise issues.
The terminal should be installed in an environment that meets the specified operating temperature and humidity ratings to ensure longevity.
Always power down the device before connecting or disconnecting communication cables or power leads.
FAQWhat type of communication does the 2711-K3A17L1 support?This model is equipped with an RS-232 (DF1) communication port, which allows it to communicate directly with Allen-Bradley controllers and other compatible devices using the DF1 protocol.Can this terminal be used for color graphics?No, the 2711-K3A17L1 features a monochrome transflective LCD display. It is designed for text-based and simple graphical interface applications.What is the primary input method for this device?The device uses a physical keypad assembly, which includes 8 function keys (F1-F8), cursor navigation keys, and a numeric keypad for data entry.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Siemens 6ES5951-7ND41 is a high-reliability power supply module designed for the Simatic S5-115U, S5-115H, and S5-115F programmable logic controller (PLC) systems. This unit provides regulated, galvanically isolated DC power to the PLC backplane, ensuring stable operation and protecting sensitive processor and I/O modules from electrical noise and voltage fluctuations. It is an essential component for maintaining legacy S5 automation infrastructure in demanding industrial environments.Features
System Compatibility: Specifically engineered for the Siemens Simatic S5-115 series.
Flexible Output Capacity: Supports 7 A at 5 VDC with standard convection cooling, or up to 15 A at 5 VDC when utilized with an active fan subassembly.
Electrical Isolation: Provides galvanic isolation between the primary input and secondary output rails to enhance system safety and noise immunity.
Data Retention Support: Features slots for two AA-size lithium batteries (6ES7971-0BA00) to ensure RAM data retention during power-off states.
Input Range: Operates on a DC input voltage range of 19.2 to 30 VDC.
ApplicationsThis power supply is intended for use in S5-115U, S5-115H, and S5-115F rack configurations. It is widely deployed in heavy manufacturing, water treatment facilities, and critical infrastructure control systems where consistent power delivery is required to prevent logic errors and system resets.Technical Specifications
Model
6ES5951-7ND41
Input Voltage
19.2 to 30 VDC
Output Current (Convection)
7 A at 5 VDC
Output Current (With Fan)
15 A at 5 VDC
Operating Temperature
0 to 55 degC
Compatibility
Simatic S5-115U, 115H, 115F
Installation Guidelines
Safety First: Always disconnect the primary power source before installing or removing the module from the S5 rack.
Mounting: Ensure the module is fully seated in the designated rack slot to maintain proper electrical contact with the backplane.
Cooling: If the application requires the 15 A output capacity, ensure the active fan assembly is correctly installed and unobstructed to prevent thermal shutdown.
Grounding: Follow standard industrial grounding practices to ensure the chassis is properly bonded to the system earth.
Battery Handling: When installing backup batteries, ensure correct polarity to prevent data loss or potential damage to the memory circuit.
FAQQ: Does this power supply include the backup batteries?A: No, the batteries (6ES7971-0BA00) are typically sold separately. The unit provides the housing and interface for two AA-size lithium batteries.Q: Can I use this in an S5-135U system?A: No, this module is specifically designed for the S5-115 series. Please verify your rack model before installation.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Siemens 6EV1 336-5AK is a high-reliability, regulated external power supply unit designed specifically for the Simatic S5 automation ecosystem. This unit is engineered to provide stable, filtered 24 VDC power from a three-phase 380 VAC industrial grid. By ensuring consistent voltage delivery to PLC processors, logic modules, and field I/O devices, it effectively prevents system resets and communication errors caused by power fluctuations in demanding environments such as steel mills, automotive assembly lines, and chemical processing plants.Features
Three-Phase Input: Utilizes a 380 VAC three-phase input to reduce ripple current and minimize stress on internal components.
Robust Protection: Features integrated overvoltage, thermal overload, and short-circuit protection to safeguard downstream automation hardware.
Fanless Design: Employs convection cooling through a rugged metallic enclosure, eliminating the risk of mechanical fan failure.
High Current Capacity: Delivers a sustained 10 A output current for demanding automation loads.
Industrial Reliability: Engineered for long-term operation in high-ambient temperature environments.
ApplicationsThis power supply is intended for use in legacy Simatic S5 automation frameworks where stable DC power is critical for system uptime. It is suitable for large-scale industrial control cabinets, distributed I/O systems, and complex process control applications requiring high-integrity power conversion.Technical Specifications
Model
6EV1 336-5AK
Brand
Siemens
Product Family
Simatic S5
Input Voltage
380 VAC (Three-Phase)
Output Voltage
24 VDC
Output Current
10 A
Operating Temperature
0 to 55 deg C
Weight
13.7 kg
Installation Guidelines
Mounting: Ensure the unit is mounted in a vertical orientation to facilitate natural convection cooling through the enclosure channels.
Clearance: Maintain adequate spacing above and below the unit to prevent heat accumulation.
Wiring: Use appropriately rated copper conductors for the 380 VAC input and 24 VDC output terminals. Ensure all terminal connections are tightened to the specified torque to prevent high-resistance joints.
Grounding: Connect the chassis ground terminal to a common plant earth bus to ensure EMI shielding and operator safety.
Safety: Always disconnect the primary AC power source before installing, removing, or performing maintenance on the unit.
FAQIs this unit compatible with modern S7 systems?The 6EV1 336-5AK is specifically designed for the Simatic S5 series. While it provides a standard 24 VDC output, it is recommended to verify the specific power requirements and mounting form factor of your control cabinet before integration into non-S5 systems.Does this power supply require external cooling?No, this unit is designed for convection cooling. Ensure that the installation environment allows for sufficient airflow around the metallic enclosure and that the ambient temperature remains within the 0 to 55 deg C range.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Description
The Allen-Bradley 1756-OB16IEFS is a high-performance, digitally isolated, scheduled DC fast output module designed for the ControlLogix 1756 chassis platform. This module is engineered for precision timing applications, serving as the primary solution for executing Motion Axis Output Cam (MAOC) instructions in remote chassis configurations. By utilizing CIP Sync Time, the module provides deterministic output control with scheduling intervals as low as 5 microseconds, making it essential for high-speed industrial processes such as flying shears, rotary packaging, and automated glue extrusion.
Features
16 independently isolated, source/sink DC output channels.
CIP Sync slave-only device for time-stamped output scheduling.
Integrated electronic fusing per point for enhanced circuit protection.
Supports high-accuracy Pulse Width Modulation (PWM) with configurable duty cycles.
Hot-swappable design allows for module replacement without removing field wiring when paired with a compatible Removable Terminal Block (RTB).
Programmable fault states including Hold Last State, ON, or OFF.
Applications
This module is ideal for time-critical automation tasks requiring microsecond-level synchronization. Typical applications include:
High-speed bottling and sortation systems.
Rotary packaging knives and cutting machinery.
Flying shear and synchronized motion control.
Precision glue extrusion and application systems.
Technical Specifications
Parameter
Specification
Model
1756-OB16IEFS
Voltage Category
12/24 VDC
Operating Voltage Range
10 to 30 VDC
Number of Outputs
16 (Isolated)
Min. Scheduling Interval
5 microseconds
Unscheduled Output Delay
14 microseconds (nominal)
Backplane Power Consumption
1.7 Watts
Max. Module Power Dissipation
3.6 Watts @ 60 deg C
Isolation Voltage
250 V continuous
Compatible RTB
1756-TBCH, 1756-TBS6H
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module to prevent electrical arcing or backplane damage.
The module occupies one standard slot in the 1756 chassis.
Use only compatible 1756-TBCH or 1756-TBS6H Removable Terminal Blocks for field wiring.
Maintain proper grounding practices for the chassis to minimize EMI interference, especially in high-speed motion applications.
Ensure adequate ventilation around the chassis to maintain operating temperatures within the specified limits, as power dissipation can reach 3.6 Watts.
Handle with ESD-safe precautions to protect internal circuitry.
FAQ
Q: Can this module be used in a remote chassis?A: Yes, the 1756-OB16IEFS is specifically designed to function in a remote chassis while executing MAOC instructions and receiving output data echoes.
Q: What is the minimum PWM cycle time?A: The module supports a minimum PWM cycle time of 1 millisecond.
Q: Does this module require a specific terminal block?A: Yes, it requires a 1756-TBCH (cage clamp) or 1756-TBS6H (spring clamp) Removable Terminal Block for field wiring connections.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Description
The Emerson Ovation 1D54557G07 is a foundational Q-Crate assembly, functioning as the primary slot rack chassis for Ovation distributed control system (DCS) components. Engineered for robust industrial deployment, this chassis provides the mechanical and electrical backbone for high-density I/O configurations in power generation, chemical processing, and large-scale manufacturing facilities. By offering a standardized modular interface, the 1D54557G07 simplifies the deployment and replacement of control modules, effectively minimizing downtime during system maintenance or hardware upgrades. The rigid backplane design ensures consistent signal integrity and secure physical mounting for all inserted modules, contributing to the overall stability of mission-critical control loops.
Features
Modular architecture supporting high-speed backplane communication protocols within the Ovation ecosystem.
Integrated slots with advanced locking mechanisms to prevent mechanical stress on electrical contacts.
Internal circuitry designed for efficient power distribution and reliable data bus connectivity.
Supports redundant configurations to enhance overall system reliability.
Provides electromagnetic interference (EMI) protection and thermal dissipation management for installed modules.
Standard 19-inch rack-mount form factor for simplified integration into existing control cabinets.
Applications
This chassis is designed for use in mission-critical industrial environments, including power generation plants, chemical processing facilities, and large-scale manufacturing automation systems where high-density I/O and reliable backplane communication are required.
Technical Specifications
Model
1D54557G07
Brand
Emerson Ovation
Operating Temperature
0 to 60 degC
Mounting Interface
Standard 19-inch rack mount
Backplane Architecture
High-speed integrated data bus
Compliance
Continuous duty in industrial control environments
Installation Guidelines
Ensure the rack is mounted in a clean, dry, and vibration-dampened environment.
Verify that the 19-inch rack rails are properly grounded to the cabinet frame to maintain EMI shielding integrity.
Always power down the system before inserting or removing any I/O modules from the chassis to prevent electrical arcing or damage to the backplane connectors.
Ensure adequate clearance above and below the chassis to allow for proper thermal dissipation and airflow.
Use ESD-safe handling procedures when installing or servicing modules within the rack.
FAQ
Is this chassis compatible with all Ovation I/O modules?The 1D54557G07 is designed for standard Ovation Q-Crate configurations. Please verify your specific module series compatibility with your system documentation.
Does this unit include the power supply?This listing is for the rack chassis only. Power supplies and I/O modules are typically ordered separately as part of the system configuration.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Bently Nevada 3300/55 Dual Velocity Monitor is a critical component of the 3300 Series machinery protection system. This module is engineered to monitor casing vibration velocity by interfacing with Velomitor piezo-velocity sensors. It provides two independent channels of continuous vibration monitoring, comparing real-time input values against user-defined Alert and Danger setpoints to ensure the integrity of rotating equipment such as turbines, compressors, motors, and pumps.Features
Dual-channel velocity monitoring for redundant or multi-point machinery protection.
Direct interface compatibility with Velomitor piezo-velocity sensors.
Integrated alarm logic with dedicated Alert and Danger relay outputs.
Proportional 4–20 mA output for integration with external PLC or DCS control systems.
Designed for seamless integration into existing 3300 Series rack environments.
ApplicationsThis monitor is widely utilized in heavy industrial environments for critical asset protection, including:
Steam and gas turbine vibration monitoring.
Centrifugal and reciprocating compressor casing vibration analysis.
Large motor and pump bearing housing velocity measurement.
Balance-of-plant rotating equipment requiring continuous vibration surveillance.
Technical Specifications
Model
3300/55-01-04-02-02-00-00-04-00
Brand
Bently Nevada
Input Type
Velomitor piezo-velocity sensors
Outputs
Dynamic vibration signals, 4–20 mA proportional
Operating Temperature
0 degC to +60 degC
Power Consumption
1.5 W (typical)
Installation Guidelines
Ensure the 3300 rack is powered down before inserting or removing the monitor module to prevent electrical damage.
Verify that the module is fully seated in the rack slot and that the front panel screws are tightened to ensure proper grounding and mechanical stability.
Use shielded twisted-pair cabling for sensor inputs to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Ensure that input wiring is routed away from high-voltage AC power lines to maintain signal integrity.
Follow standard ESD handling procedures when touching the module circuitry.
FAQWhat is the primary function of the 3300/55 monitor?The 3300/55 is designed to measure vibration velocity on machine casings using piezo-velocity sensors and provide alarm relay outputs for machinery protection.Is this module compatible with other 3300 series components?Yes, this monitor is designed specifically for the Bently Nevada 3300 Series rack system and is compatible with standard 3300 series power supplies and I/O modules.Does this unit require external barriers?This specific model (suffix 00 for barriers) is configured for standard input and does not include intrinsic safety barriers.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Siemens 6ES5390-5AA22 is a specialized timer and counter expansion module designed for the legacy Simatic S5-130 and S5-150 programmable logic controller (PLC) systems. This module is engineered to offload time-critical operations and high-speed event-counting tasks from the central processing unit, ensuring precise execution of machine sequencing and process control without taxing CPU cycles.Features
Integrated 64 digital timers for complex delay processing.
16 dedicated hardware counters for high-speed event registration.
Independent signal processing architecture to prevent CPU cycle delays.
Rugged design optimized for standard Simatic S5 backplane bus integration.
High immunity to electromagnetic interference common in industrial environments.
ApplicationsThis module is suitable for demanding industrial automation environments, including automotive assembly lines, steel processing facilities, power generation plants, and material handling systems where precise timing and pulse counting are critical to operational efficiency.Technical Specifications
Model
6ES5390-5AA22
Brand
Siemens
Series
Simatic S5-130 / S5-150
Integrated Timers
64 Digital Timers
Integrated Counters
16 Hardware Counters
Power Supply
5 VDC via Backplane
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Mounting Type
Rack Mount / Subrack Slot
Installation Guidelines
Ensure the PLC system is powered down before inserting or removing the module from the subrack.
Verify that the module is correctly seated in the backplane slot to ensure secure electrical contact.
Maintain adequate spacing within the cabinet to allow for proper thermal dissipation.
Route signal cables away from high-voltage lines and high-EMI sources to maintain signal integrity.
Follow standard ESD precautions when handling the module to prevent damage to internal circuitry.
FAQWhat systems is the 6ES5390-5AA22 compatible with?This module is specifically designed for use with the Siemens Simatic S5-130 and S5-150 PLC systems.Does this module require external power?No, the module draws its required 5 VDC power directly from the Simatic S5 backplane bus.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe General Electric IC693CMM311E is a high-performance Communication Coprocessor Module (CCM) designed for the GE Fanuc Series 90-30 PLC platform. This module serves as an intelligent interface, offloading communication tasks from the main CPU to improve overall system efficiency. It is specifically engineered to handle complex serial data exchanges, supporting two independent serial ports for versatile connectivity in industrial automation environments.Features
Dual Serial Port Interface: Equipped with two configurable serial ports for flexible device communication.
Intelligent Processing: Acts as a coprocessor to manage communication protocols, reducing the processing burden on the host CPU.
Status Monitoring: Integrated LED indicators for Module OK, Port 1 activity, and Port 2 activity to facilitate rapid diagnostics.
Compact Design: Occupies a single slot on the Series 90-30 baseplate, allowing for efficient rack space utilization.
Compatibility: Designed for use with modular GE Series 90-30 CPUs.
ApplicationsThis module is widely utilized in industrial control systems requiring serial communication with external devices such as operator interfaces (HMIs), variable frequency drives (VFDs), barcode scanners, and other third-party serial-enabled equipment. It is ideal for manufacturing, water treatment, and process control applications where reliable serial data integration is essential.Technical Specifications
Product Model
IC693CMM311E
Product Type
Communication Coprocessor Module (CCM)
Series
Series 90-30
Backplane Current Draw
400 mA at 5VDC
Number of Serial Ports
2
Module Width
Single Slot
Mounting Type
Baseplate Mounted
Status Indicators
Module OK, Port 1, Port 2
Installation Guidelines
Power Down: Always disconnect power from the PLC rack before inserting or removing the module to prevent electrical damage.
Slot Assignment: The module can be installed in any slot on the baseplate except for the CPU slot.
ESD Precautions: Handle the module by its edges and use proper electrostatic discharge (ESD) protection to avoid damaging sensitive internal components.
Seating: Ensure the module is firmly seated in the backplane connector and secured with the integrated locking mechanism.
Cable Routing: Route serial communication cables away from high-voltage power lines and sources of electromagnetic interference (EMI) to ensure signal integrity.
FAQCan I install this module in the CPU slot?No, the IC693CMM311E is designed to be installed in any available I/O slot on the Series 90-30 baseplate, excluding the CPU slot.How many of these modules can I use in one system?The system supports up to four (4) CMM modules per configuration, depending on the specific CPU and backplane capacity.What is the power requirement for this module?The module draws 400 mA from the +5VDC backplane supply.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1791-16BC is a block I/O module designed for industrial automation applications. This unit provides 16 inputs and 16 outputs, operating within a 10-30 VDC voltage range. As a compact block I/O solution, it is engineered to interface field devices directly with the control system, facilitating efficient signal processing in distributed I/O architectures.Features
16 inputs organized into 2 groups of 8.
16 discrete outputs for versatile control.
Compatible with 24V DC control systems.
Robust block-style housing for industrial environments.
Wide operating voltage range of 10-30V DC.
Technical Specifications
Product Model
1791-16BC
Inputs
16 (2 groups of 8)
On-state Voltage Range
10-30V DC
Off-state Current (Max)
11.0mA @ 30V
Off-state Current (Min)
2.5mA @ 10V
Off-state Voltage (Max)
5V DC
Input Impedance (Max)
3.4K ohms
Min On-state Current (Output)
1mA per output
Max On-state Voltage Drop
1.0V @ rated current
Off-state Leakage Current (Max)
0.5mA
Output Signal Delay
0.5ms on / 1.0ms off
Installation Guidelines
Ensure the power supply is disconnected before installing or removing the module to prevent electrical damage.
Mount the module in a location that allows for adequate ventilation and cooling to maintain optimal operating temperatures.
Use shielded cables for I/O connections to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Verify that all wiring connections are secure and properly terminated according to the module's terminal layout.
Handle the module with care, adhering to standard ESD (Electrostatic Discharge) protection practices during installation.
FAQIs the 1791-16BC still in production?No, the Allen-Bradley 1791-16BC was officially discontinued by the manufacturer on June 30, 2015. We provide high-quality surplus or refurbished units to support legacy systems.What are the compatible spare models for this unit?The 1791-16BC is often interchangeable with revisions 1791-16BC/B and 1791-16BC/C, depending on your specific system requirements.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB DO620 (3BHT300009R1) is a high-density digital output module designed for use within the Advant S600 I/O system. This module provides 32 digital output channels, organized into four isolated groups, to facilitate reliable control signal distribution in industrial automation environments. As a component of the Advant Controller 110/160 series, it is engineered for robust performance in demanding process control applications.Features
32-channel digital output configuration
Four isolated groups for enhanced signal separation
Maximum switching capacity of 500mA per channel
Operational voltage rating up to 60VDC
Designed for the Advant S600 I/O platform
Technical Specifications
Product Model
DO620
Order Code
3BHT300009R1
Number of Channels
32
Output Type
Digital Output
Isolation
4 Groups
Max Current per Channel
500mA
Max Voltage
60VDC
System Compatibility
Advant S600
Weight
1.16 kg
Installation Guidelines
Ensure the controller power is disconnected before installing or removing the module from the S600 I/O rack.
Handle the module using proper ESD (Electrostatic Discharge) precautions to prevent damage to internal circuitry.
Verify that the module is firmly seated in the backplane connector to ensure reliable communication and power distribution.
Route signal wiring away from high-voltage power cables and sources of electromagnetic interference (EMI) to maintain signal integrity.
Ensure proper grounding of the I/O rack according to ABB installation standards for the Advant system.
FAQIs the ABB DO620 still in production?No, the ABB DO620 (3BHT300009R1) has been discontinued by the manufacturer. We provide high-quality surplus and refurbished units to support legacy system maintenance.What systems is the DO620 compatible with?The DO620 is specifically designed for the ABB Advant S600 I/O system, commonly used with Advant Controller 110 and 160 series hardware.
