Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
ABB TB852 RCU Link Terminator
Configured for RCU link termination in ABB Advant Controller and System 800xA platforms, the ABB TB852 3BSC950263R1 (TB852 RCU Link Terminator) provides direct physical termination for redundant control unit communication links.
Hardware Specifications
Parameter
Specification
Model
TB852
Brand
ABB
Product Type
RCU Link Terminator
Product ID
3BSC950263R1
Origin
Global ABB supply chain
Weight
0.02 kg
Dimensions
23 mm width x 20 mm height x 57 mm depth
Power Consumption
Passive component, no external power consumption
Communication Function
RCU link signal termination
Application Platform
ABB Advant Controller / System 800xA environments
HS Code
85369095 / 853690
Industrial Control Bus Termination Characteristics
The TB852 is a passive termination component designed for ABB redundant control communication networks. It terminates the RCU link electrical path and reduces signal reflection at the communication endpoint.
Furthermore, the component supports stable data transmission by maintaining the correct termination state of the RCU communication circuit. ABB industrial control architectures use this type of termination hardware to preserve communication quality between redundant processing units and associated control modules.
For ABB PLC and DCS installations, proper backplane bus communication velocity management and I/O density scaling depend on correct physical network configuration. Therefore, TB852 installation must follow the controller hardware topology requirements defined for the specific ABB control system.
Frequently Asked Questions
Q: What is the primary function of ABB TB852 3BSC950263R1? A: The TB852 functions as an RCU Link Terminator. It provides endpoint termination for the ABB RCU communication link and maintains proper electrical signal conditions.
Q: Does the TB852 require an external power supply? A: No. The TB852 is a passive termination component and does not require an external power connection.
Q: Can the TB852 be installed in any ABB control network position? A: No. The TB852 must be installed at the designated termination point of the RCU link according to the ABB system hardware configuration.
Field Installation Guidelines
Install the TB852 only at the specified RCU link termination position within the ABB control architecture.
Verify that the communication cable routing matches the ABB controller installation documentation.
Maintain separation between communication wiring and high-voltage power cables to reduce electrical interference.
Confirm connector seating and mechanical fixation before system startup.
Follow ABB grounding and shielding practices for connected communication cables.
Do not modify the passive termination circuitry or replace the component with non-approved termination devices.
