ABB TB820 ModuleBus Modem The ABB 3BSE008555R1, also cataloged as the TB820 ModuleBus Modem, operates as a dedicated communication interface component...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
ABB TB820 ModuleBus Modem
The ABB 3BSE008555R1, also cataloged as the TB820 ModuleBus Modem, operates as a dedicated communication interface component for ModuleBus signal transmission and expansion within ABB Advant OCS and AC 400 system architectures.
Hardware Specifications
Parameter
Specification
Model
TB820
Brand
ABB
Origin
Sweden
Power Consumption
Supplied through system rack or ModuleBus interface
Product Type
ModuleBus Modem / Interface Unit
Part Number
3BSE008555R1
Communication Function
ModuleBus communication extension and interface
System Compatibility
ABB Advant OCS / AC 400 control systems
Mounting Method
DIN rail or rack mounting depending on system configuration
Signal Interface
Electrical or optical ModuleBus communication interface
Backplane Bus Communication and I/O Expansion Characteristics
The ABB TB820 uses the ABB ModuleBus architecture to transfer communication signals between controller assemblies and connected I/O units. Therefore, the unit provides a physical interface for extending ModuleBus communication paths within compatible ABB control platforms.
The module supports structured communication between system nodes and maintains ModuleBus signal integrity through the defined ABB hardware interface. In addition, the TB820 can be integrated into configurations requiring distributed I/O placement and controller-to-I/O communication extension.
The ABB industrial control platform design focuses on backplane bus communication velocity, deterministic data exchange, and I/O density scaling. However, TB820 specific firmware flash compatibility and communication parameters depend on the installed ABB system revision and hardware configuration.
Frequently Asked Questions
Q: What is the primary function of the ABB TB820 3BSE008555R1? A: The TB820 functions as a ModuleBus Modem that provides communication interfacing and expansion capability for ABB ModuleBus-based control systems.
Q: Can the TB820 operate as a standalone communication device? A: No. The TB820 requires integration with compatible ABB control hardware and ModuleBus system components for operation.
Q: Does the TB820 support optical ModuleBus communication? A: The TB820 is designed for ModuleBus communication extension. The exact optical or electrical interface capability depends on the connected ABB hardware configuration.
Field Installation Guidelines
Install the ABB TB820 according to the applicable ABB system installation manual and hardware configuration requirements.
Verify that the mounting position matches the specified rack or DIN rail arrangement before wiring.
Keep ModuleBus communication cables separated from high-voltage power conductors to reduce electrical interference.
Connect cable shielding and grounding according to ABB control cabinet grounding practices.
Check connector seating, module alignment, and system power conditions before commissioning.
Confirm controller recognition and ModuleBus communication status through the ABB engineering tool after installation.
