Jelajahi rangkaian lengkap produk otomasi industri dari merek-merek ternama seperti ABB, Bently, Honeywell, GE, dan lainnya. IndustriaX Limited membantu produsen mendapatkan komponen langka dan sulit ditemukan di seluruh dunia dengan pengiriman cepat untuk meminimalkan waktu henti.
DescriptionThe Siemens 6ES5 695-0AA11 is a dedicated EPROM programmer module engineered for the Simatic S5 automation ecosystem. This hardware interface is designed to facilitate the programming and verification of non-volatile memory sub-modules used in legacy S5 PLC systems. By providing a reliable method to burn compiled ladder logic and statement lists onto EPROM/EEPROM chips, this unit is essential for maintenance, backup creation, and rapid restoration of control logic in industrial environments.Features
Optimized zero-insertion-force (ZIF) socket to ensure secure chip seating and prevent pin damage.
Precision voltage-stepping circuitry for accurate Vpp and Vcc pulse control during programming cycles.
Integrated LED status indicators for real-time monitoring of power, burning activity, and checksum verification.
Designed for integration with PG 695 programming terminals and AT-compatible industrial PCs.
Robust construction suitable for long-term use in demanding industrial maintenance settings.
ApplicationsThis programmer module is widely utilized in legacy industrial facilities, including metallurgical processing plants, municipal power generation sites, and oil and gas refineries. It is primarily used by engineering teams to maintain system uptime by ensuring that critical PLC program backups are correctly written and verified on non-volatile memory media.Technical Specifications
Model
6ES5 695-0AA11
Brand
Siemens
Series
Simatic S5
Host Compatibility
PG 695 / AT-Compatible Industrial PCs
Supported Media
Simatic S5 EPROM / EEPROM sub-modules
Operating Voltage
120-230 VAC
Operating Temperature
5 to 40 deg C
Storage Temperature
-20 to 60 deg C
Relative Humidity
85% non-condensing
Installation Guidelines
Ensure the host workstation is powered down before connecting or disconnecting the programmer module.
Handle EPROM/EEPROM chips with care, utilizing anti-static measures to prevent electrostatic discharge (ESD) damage to the silicon components.
Verify that the ZIF socket lever is in the open position before inserting the memory module and ensure it is locked securely before initiating any programming sequence.
Keep the unit in a clean, dry environment within the specified operating temperature range to ensure long-term reliability of the internal circuitry.
Ensure proper ventilation around the unit during operation to prevent heat buildup during extended burning cycles.
FAQIs this module compatible with modern Windows-based PCs?The 6ES5 695-0AA11 is designed specifically for legacy PG 695 terminals and AT-compatible industrial PCs. Compatibility with modern operating systems may require specialized legacy hardware adapters or virtualized environments, which are not standard.What types of memory modules does this programmer support?This unit supports standard Simatic S5 EPROM and EEPROM memory sub-modules used for storing PLC user programs and data blocks.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1756-LSC8XIB8I is a high-speed counter input module designed for the ControlLogix platform. This module provides eight individually isolated input channels, enabling precise pulse counting and frequency measurement in demanding industrial automation environments. It is engineered to integrate seamlessly into a ControlLogix chassis, offering high-performance signal processing for motion control, flow metering, and position tracking applications.Features
Eight individually isolated input channels for enhanced signal integrity and noise immunity.
High-speed counting capabilities suitable for fast-pulse applications.
Designed for direct integration into the Allen-Bradley ControlLogix I/O architecture.
Supports sophisticated counter configurations to meet specific process requirements.
Robust construction for reliable operation in industrial control panels.
ApplicationsThis module is typically utilized in manufacturing and process control systems where high-speed pulse counting is required. Common applications include conveyor speed monitoring, turbine flow meter integration, rotary encoder feedback, and high-speed batch counting.Technical Specifications
Product Model
1756-LSC8XIB8I
Manufacturer
Allen-Bradley
Platform
ControlLogix
Input Type
High-Speed Counter
Number of Inputs
8 (Individually Isolated)
Weight
0.2 kg
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module to prevent electrical damage.
Verify that the module is fully seated in the chassis slot and the locking mechanism is engaged.
Use shielded twisted-pair cabling for input signals to minimize electromagnetic interference (EMI).
Ensure proper grounding of the chassis and signal shields according to local electrical codes and Allen-Bradley installation manuals.
Maintain adequate clearance around the module to allow for proper airflow and cooling within the cabinet.
Handle the module using ESD-safe practices to prevent damage to sensitive internal components.
FAQWhat is the primary function of the 1756-LSC8XIB8I?The 1756-LSC8XIB8I is a specialized ControlLogix input module designed to count high-speed pulses from field devices such as encoders or flow meters, providing accurate data to the controller.Are the inputs on this module isolated?Yes, the module features eight individually isolated inputs, which helps prevent ground loops and protects the module circuitry from electrical noise or voltage spikes on individual channels.Is this module compatible with all ControlLogix chassis?The 1756-LSC8XIB8I is designed for standard ControlLogix chassis. Please consult your specific system hardware manual to ensure compatibility with your current firmware and processor revision.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The 2711-NC13 is a high-quality communication cable manufactured by Allen-Bradley, specifically engineered for use with PanelView Plus 6 operator terminals. This RS-232 serial cable is designed to provide reliable data transfer for both programming and operational tasks within industrial automation systems.Features
Designed for seamless integration with PanelView Plus 6 terminals.
Supports RS-232 serial communication protocols for robust data exchange.
Equipped with standard 9-pin D-shell connectors on both ends for secure, reliable connections.
5-meter length provides flexibility for routing within control panels and between devices.
ApplicationsThis cable is primarily used for connecting programming workstations to operator interfaces, facilitating the download of HMI applications, firmware updates, and real-time serial data communication in industrial environments.Technical Specifications
Parameter
Specification Details
Model
2711-NC13
Brand
Allen-Bradley
Cable Type
RS-232 Operating / Programming Cable
Connector Type
9-Pin D-Shell to 9-Pin D-Shell
Length
5 Meters
Operating Temperature
0 to 50 degC
Compatibility
PanelView Plus 6 Terminals
Installation Guidelines
Ensure both the programming device and the PanelView terminal are powered down before connecting or disconnecting the cable to prevent potential electrical damage.
Route the cable away from high-voltage power lines and high-EMI sources to maintain signal integrity.
Secure the D-shell connectors using the integrated thumbscrews to prevent accidental disconnection due to vibration.
Avoid sharp bends or excessive tension on the cable during installation to maintain the integrity of the internal conductors.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Bently Nevada 330104-08-12-10-02-00 is a high-performance 3300 XL 8 mm proximity probe designed for eddy current transducer systems. This transducer system provides precise, non-contact measurement of shaft vibration and position in rotating machinery, such as steam turbines, gas turbines, and centrifugal compressors. The 3300 XL series is engineered for high accuracy, temperature stability, and full compatibility with API 670 standards.Features
Advanced eddy current proximity sensing technology.
Complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need for individual component matching or bench calibration.
Standard 8 mm probe design with M10 x 1 threads.
Includes armored cable for enhanced mechanical protection in harsh industrial environments.
Equipped with a miniature coaxial ClickLoc connector.
Applications
Vibration Monitoring (Dynamic): Detects radial vibration and shaft unbalance to trigger alarms or automatic machine trips, preventing mechanical failure.
Thrust/Axial Position (Static): Monitors axial shaft movement to detect bearing wear or failure.
Industrial Sectors: Widely used in power generation (turbines), oil and gas (compressors/pumps), petrochemical (fans/agitators), and heavy industry (blowers/paper mills).
Technical Specifications
Product Model
330104-08-12-10-02-00
System Type
3300 XL 8 mm Proximity Transducer
Thread Size
M10 x 1
Unthreaded Length
80 mm
Case Length
120 mm
Cable Length
1.0 meter (3.3 feet)
Connector Type
Miniature coaxial ClickLoc
Cable Protection
Armored
Agency Approval
Not required
Installation Guidelines
Handling: Proximity probes are sensitive electronic components. Handle with care to avoid damage to the probe tip or connector pins.
Mounting: Ensure the probe is mounted in a rigid bracket to prevent mechanical resonance. Maintain the specified gap distance from the target shaft as per the system calibration.
Wiring: Use only compatible Bently Nevada extension cables. Ensure all connections are clean and fully seated (ClickLoc connectors must be locked).
Grounding: Follow standard industrial grounding practices for instrumentation to minimize EMI/RFI interference.
Power: Always disconnect power from the Proximitor sensor before connecting or disconnecting the probe to prevent electrical damage.
FAQWhat is the typical gap voltage for this sensor?When properly installed, the Proximitor sensor output should be approximately -9 VDC to -11 VDC, operating within a linear range of -1 VDC to -17 VDC.Are 3300 XL components interchangeable with older systems?Yes, 3300 XL 8 mm components are both electrically and physically backward compatible with non-XL 3300 5 mm and 8 mm transducer system components.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB CI610 is an I/O Bus Extender module designed for use within the Advant OCS and Advant 800xA control system environments. This module facilitates the extension of the I/O bus, allowing for flexible configuration and expanded connectivity in distributed control architectures.Features
Designed for Advant OCS and Advant 800xA system integration.
Provides reliable I/O bus extension capabilities.
Robust industrial construction for demanding control room environments.
Original ABB spare part, identified by order code 3BHT300003R1.
ApplicationsThe CI610 is primarily utilized in industrial automation systems where physical distance between the controller and I/O racks requires bus extension. It is commonly found in power generation, chemical processing, and large-scale manufacturing control systems utilizing the Advant platform.Technical Specifications
Manufacturer
ABB
Model
CI610
Part Number
3BHT300003R1
Product Type
I/O Bus Extender
Weight
1.16 kg
Tariff Code
8517620050
Installation Guidelines
Ensure the control system is powered down before installing or removing the CI610 module to prevent electrical damage.
Verify that the module is properly seated in the designated rack slot to ensure reliable backplane communication.
Maintain proper grounding practices for the rack and cabinet to minimize electromagnetic interference (EMI).
Ensure adequate ventilation around the module to prevent overheating during continuous operation.
Handle with care to avoid electrostatic discharge (ESD) damage to the internal circuitry.
FAQIs the ABB CI610 still in production?No, the CI610 has been discontinued by the manufacturer. We provide this unit as a spare part for legacy system maintenance and support.What systems is the CI610 compatible with?The CI610 is specifically designed for integration with ABB Advant OCS and Advant 800xA control systems.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB UDD406A (3BHE041464R0101) is a high-performance control board designed for use within ABB’s heavy-duty power electronics and control portfolios, including the UNITROL 6000 excitation system. This module functions as a critical logic controller, executing complex mathematical models required for managing the magnetic fields of large synchronous generators to ensure grid stability and reactive power compensation. Beyond its primary control functions, it serves as a diagnostic hub, monitoring the health of connected power semiconductor modules and tracking historical fault data.Features
Central processing unit for power electronics and excitation systems.
Supports fiber optic communication for high-speed data exchange.
Integrated diagnostic capabilities for power semiconductor health monitoring.
Designed for standard sub-rack mounting with robust front-plane connectors.
Compatible with modular industrial control architectures.
Applications
Power Generation: Excitation systems for grid-compliant generator stabilization.
Oil & Gas: Efficient control for pumping and compression systems.
Metals & Mining: Energy management and motor control for heavy industrial mills.
Chemical Processing: Continuous process control for emissions and reaction management.
Manufacturing: Energy-efficient control for industrial drives and injection molding machinery.
Technical Specifications
Model
UDD406A
Order Code
3BHE041464R0101
Digital Inputs
24V DC
Analog Inputs
0/4-20mA
Operating Temperature
0 degC to +55 degC
Storage Temperature
-25 degC to +70 degC
Humidity
5-95% RH non-condensing
Installation Guidelines
Ensure the system is powered down before inserting or removing the module from the rack.
Mark all existing wires with their connector IDs before detaching the old unit to ensure correct reconnection.
Maintain physical separation between control/communication wiring and high-power input/motor cables to prevent electromagnetic interference (EMI).
Route cables through designated cabinet grommets and ensure cable clamps are tightened on the stripped sections to maintain a secure, low-impedance ground.
Handle the module using standard ESD (Electrostatic Discharge) precautions to prevent damage to sensitive internal circuitry.
FAQWhat is the primary function of the ABB UDD406A?The UDD406A acts as a central control board and logic controller, primarily used in excitation systems to manage generator magnetic fields and perform real-time diagnostics on power electronics.Is this module compatible with existing ABB control systems?Yes, it is designed for integration into ABB Advant OCS and 800xA environments, as well as specific power electronics platforms like the UNITROL 6000.What are the environmental requirements for this board?The module is designed for industrial environments with an operating temperature range of 0 degC to +55 degC and requires a non-condensing humidity environment of 5-95% RH.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Honeywell 620-0024 (6200024) is a dedicated memory module designed for Honeywell / ISSC PLC systems. It provides 24 k of non-volatile memory capacity, ensuring reliable storage for controller firmware, configuration parameters, and runtime logic. This module is essential for maintaining system integrity in industrial automation environments, including oil refining, power generation, chemical processing, and heavy manufacturing, where deterministic control and data retention are critical.Engineered for durability, the unit maintains memory integrity despite exposure to industrial electrical noise and vibration. It integrates directly into the PLC rack backplane, facilitating automatic data retrieval during system boot-up or controller initialization, which helps minimize downtime during maintenance or power-cycle events.Features
24 k non-volatile memory capacity for program and configuration storage.
Designed for seamless integration with Honeywell / ISSC legacy PLC backplanes.
Passive memory retention architecture for high reliability.
Compact plug-in design for efficient rack mounting and field replacement.
Optimized for consistent data retention across power cycles and fault events.
ApplicationsThis memory module is primarily used in legacy Honeywell / ISSC PLC control systems to support:
Controller firmware and logic backup.
System configuration and parameter retention.
Rapid recovery of control logic during system restarts.
Technical Specifications
Model
620-0024 (6200024)
Brand
Honeywell
Module Type
Memory Module
Memory Capacity
24 k
Operating Temperature
0 to 60 deg C
Power Consumption
Approx. 1 W
Mounting
Rack-mounted plug-in
Installation Guidelines
Ensure the PLC rack power is disconnected before inserting or removing the module to prevent electrical damage.
Handle the module by the edges to avoid electrostatic discharge (ESD) damage to internal components.
Align the module carefully with the backplane connector slots before applying pressure to seat it.
Ensure the module is fully seated and secured within the rack to maintain proper electrical contact and vibration resistance.
Keep the module away from high-EMI sources and ensure the control cabinet provides adequate ventilation to maintain operating temperatures below 60 deg C.
FAQIs this module compatible with all Honeywell PLC systems?The 620-0024 is designed for specific Honeywell / ISSC legacy PLC platforms. Please verify your controller backplane compatibility before installation.Does this module require external power?No, the module is powered directly through the PLC backplane connection.What is the primary function of this module?It serves as a non-volatile storage medium for PLC program logic and system configuration data, ensuring that critical information is retained during power loss.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The General Electric IC660TBA104 is a terminal assembly designed for the Genius I/O system. This component provides the necessary physical connection points for field wiring, facilitating the integration of I/O circuits within the Genius distributed control architecture.Features
Designed for integration with Genius I/O blocks.
Supports 4 input and 2 output circuits.
Rated for 115V AC or 125V DC operation.
Provides robust isolation: 1500V block-to-block and 300V group-to-group.
Engineered for reliable performance in industrial environments with a maximum heat dissipation of 12 Watts.
Technical Specifications
Product Model
IC660TBA104
Voltage Rating
115V AC / 125V DC
Operating Voltage Range
93-132V AC / 105-145V DC
Maximum Current
250mA (AC) / 140mA (DC)
Frequency/Ripple
47-63 Hz / 10% max ripple
Isolation (Block to Block)
1500V (1 minute)
Isolation (Group to Group)
300V
Power Supply Dropout
1 cycle (AC) / 10ms (DC)
Weight
0.5 kg
Installation Guidelines
Ensure all power is disconnected from the Genius I/O block before installing or removing the terminal assembly.
Verify that the terminal assembly is securely seated to ensure proper electrical contact with the I/O block.
Route field wiring away from high-voltage power lines and sources of electromagnetic interference (EMI) to maintain signal integrity.
Use appropriate wire gauges as specified by local electrical codes and ensure all terminal screws are tightened to the recommended torque.
Maintain adequate ventilation around the I/O block to prevent exceeding the maximum heat dissipation limits.
FAQWhat is the primary function of the IC660TBA104?The IC660TBA104 serves as a terminal assembly for Genius I/O blocks, providing the physical interface for connecting field devices to the control system.Is this terminal assembly compatible with both AC and DC voltages?Yes, the unit is rated for 115V AC and 125V DC applications, with specific operating ranges defined for each.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Bently Nevada 3500/50 Tachometer Module is a critical component of the 3500 Series Machinery Protection System. It is engineered to measure rotational speed and provide phase reference signals for shafts in turbines, compressors, and other essential rotating equipment. The 3500/50-04-01 configuration provides high-integrity speed monitoring, ensuring reliable overspeed protection and accurate phase reference data for machinery diagnostics and control systems.Features
High-integrity speed monitoring for critical turbomachinery.
Supports single or redundant configurations to meet stringent overspeed protection requirements.
Provides essential phase reference signals for synchronous vibration analysis.
Designed for continuous, reliable online monitoring in compliance with API 670 standards.
Fully compatible with other 3500 Series modules for integrated plant-wide machinery protection.
Configurable via 3500 Rack Configuration Software for customized alarm thresholds.
Includes buffered transducer outputs for external diagnostic equipment.
ApplicationsThis module is widely used in industrial environments for monitoring speed on critical assets, including steam and gas turbines, centrifugal compressors, fans, and large motors. It serves as a primary input for safety-instrumented systems requiring overspeed detection and phase-locked vibration monitoring.Technical Specifications
Manufacturer
Bently Nevada
Part Number
3500/50-04-01
Series
3500 Machinery Protection System
Product Type
Tachometer Module
Channels
2 independent tachometer channels
Input Compatibility
Proximity probes or magnetic pickups
Power Consumption
8 W typical
Operating Temperature
-30 degC to +65 degC
Storage Temperature
-40 degC to +85 degC
Humidity
95% non-condensing
Installation Guidelines
Ensure the 3500 rack power is disconnected before installing or removing the module.
The module is designed for standard half-height 3500 rack slots; ensure proper seating and engagement with the backplane connectors.
Use shielded cabling for all transducer inputs to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the 3500 rack to ensure signal integrity and safety compliance.
Verify that the I/O module matches the configuration settings in the 3500 Rack Configuration Software before commissioning.
FAQQ: Can the 3500/50 module be used for overspeed protection?A: Yes, the module is designed for high-integrity overspeed protection and can be configured in redundant pairs to meet safety requirements.Q: What type of sensors does this module support?A: The 3500/50-04-01 supports standard proximity probes and magnetic pickup sensors for speed measurement.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Bently Nevada 3300/55 Dual Velocity Monitor is a critical component of the 3300 Series machinery protection system. It is engineered to provide continuous monitoring of casing vibration velocity by interfacing with Velomitor piezo-velocity sensors. This module features two independent channels that compare real-time vibration data against user-defined alarm setpoints, ensuring reliable protection for rotating equipment such as turbines, compressors, motors, and pumps.Features
Dual-channel velocity monitoring for independent vibration analysis.
Compatible with standard Velomitor piezo-velocity sensors.
Integrated alarm and danger relay outputs for automated machinery trip functions.
Provides proportional 4-20 mA outputs for integration with external control and data acquisition systems.
Designed for seamless integration into the 3300 rack-based monitoring architecture.
ApplicationsThis monitor is primarily used in industrial environments for the protection of critical rotating machinery. It is suitable for monitoring casing vibration in high-speed turbines, centrifugal compressors, large industrial motors, and pumps where velocity-based vibration monitoring is required to detect mechanical degradation or imbalance.Technical Specifications
Model
3300/55-03-01-15-15-00-00-01-00
Brand
Bently Nevada
Input Type
Velomitor piezo-velocity sensors
Output Signals
Dynamic vibration, 4-20 mA proportional, voltage scaling
Operating Temperature
0 degC to +60 degC
Power Consumption
1.5 W typical
Installation Guidelines
Ensure the 3300 rack is powered down before inserting or removing the monitor module to prevent electrical damage.
Verify that the module is fully seated in the rack slot and that the front panel connectors are securely fastened.
Use shielded cabling for all sensor inputs to minimize electromagnetic interference (EMI) and signal noise.
Ensure proper grounding of the 3300 rack system according to the site-specific installation manual to maintain signal integrity.
Handle the module using ESD-safe practices to prevent damage to sensitive internal electronic components.
FAQWhat is the primary function of the 3300/55 monitor?The 3300/55 is designed to monitor casing vibration velocity using piezo-velocity sensors and provide alarm/trip relay logic to protect rotating machinery from damage.Is this module compatible with other sensor types?This specific configuration (15-15) is optimized for Velomitor piezo-velocity sensors. Refer to the Bently Nevada 3300 system documentation for compatibility with other sensor technologies.Does this module require external barriers?The suffix code 00 in the barrier option indicates that this unit is configured for standard input without intrinsic safety barriers.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The 2711-NL1 is a replacement backlight lamp designed by Allen-Bradley for use with PanelView 550 operator interface terminals. This component is essential for restoring display brightness and screen legibility in legacy HMI units, allowing maintenance teams to address degraded lighting conditions before total display failure occurs. By performing proactive maintenance, operators can minimize unexpected downtime and maintain clear visibility of critical process data.Features
Engineered specifically for PanelView 550 terminals (Series G and below) and PanelView 550 Touch terminals (Series A only).
Restores optimal screen luminance for improved operator interaction.
Rated for a service life of 20,000 hours under standard operating conditions.
Compact, industrial-grade design for straightforward field replacement.
ApplicationsThis backlight lamp is intended for use in industrial control environments where PanelView 550 HMI units are deployed. It is a critical spare part for maintenance technicians responsible for the upkeep of legacy automation interfaces in manufacturing, processing, and utility facilities.Technical Specifications
Model
2711-NL1
Brand
Allen-Bradley
Operating Voltage
5 V
Current Draw
1 A
Power Consumption
5 W
Rated Bulb Life
20,000 hours
Operating Temperature
0 to 55 degC
Installation Guidelines
Ensure the PanelView terminal is fully disconnected from the power source before attempting to access or replace the lamp.
Handle the replacement lamp with care; avoid touching the glass surface directly to prevent oil deposits that may affect thermal performance.
Verify that the HMI terminal series (Series G and below for standard, Series A for Touch) is compatible with this specific lamp model before installation.
Ensure the lamp is securely seated in the connector to prevent flickering or intermittent display issues.
After installation, re-assemble the housing according to the original equipment manufacturer's service manual to maintain the integrity of the enclosure.
FAQIs this lamp compatible with all PanelView 550 models?The 2711-NL1 is compatible with PanelView 550 terminals (Series G and below) and PanelView 550 Touch terminals (Series A only). Please check your specific unit's series label before purchase.What is the expected lifespan of this lamp?The rated bulb life is 20,000 hours under normal operating conditions within the specified temperature range.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe IC693CPU331T is a high-performance modular CPU module belonging to the GE Fanuc Series 90-30 programmable logic controller (PLC) family. Designed for demanding industrial automation applications, this processor provides reliable control and logic execution for complex machine and process control systems. It utilizes an 80188 processor architecture to deliver efficient instruction processing and system management.Features
Processor Type: 80188 microprocessor.
Clock Speed: 10 MHz operation for rapid logic execution.
Scan Rate: Typical scan rate of 0.4 ms per 1K of Boolean logic.
Memory and Logic: Supports up to 680 timers and counters for versatile control configurations.
Expansion Capability: Supports up to four (4) expansion baseplates and four (4) remote I/O baseplates, allowing for scalable system architecture.
Power Requirements: Operates on a +5VDC bus voltage with a current draw of 350mA.
Technical Specifications
Model
IC693CPU331T
Series
Series 90-30
Processor
80188
Clock Speed
10 MHz
Typical Scan Rate
0.4 ms / 1K logic
Timers/Counters
680
Bus Voltage
+5VDC
Current Load
350mA
Operating Temperature
0 to 60 degC (32 to 140 degF)
Installation Guidelines
Ensure the PLC system is powered down before inserting or removing the CPU module from the baseplate to prevent electrical damage.
The module should be installed in the designated CPU slot of the Series 90-30 baseplate.
Maintain proper ventilation within the control cabinet to ensure the module operates within its specified temperature range.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching the module circuitry.
Ensure all baseplate connections are secure and that the module is fully seated to maintain reliable bus communication.
FAQWhat is the primary function of the IC693CPU331T?This module serves as the central processing unit for a GE Series 90-30 PLC system, responsible for executing the user program, managing I/O data, and coordinating communication across the backplane.Can this module be used with remote I/O?Yes, the IC693CPU331T supports up to four expansion baseplates and four remote I/O baseplates, providing flexibility for distributed control architectures.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB SDCS-PIN-41A (Order Code: 3BSE004939R1) is a pulse transformer module designed for use within ABB industrial drive systems. This component serves as a critical interface for signal isolation and pulse transmission, ensuring reliable control signal delivery within the drive's power electronics architecture. As a discontinued component, it is primarily utilized for the maintenance and repair of legacy ABB drive installations.Features
Original ABB spare part for drive control systems.
Designed for high-reliability pulse signal isolation.
Compact PCB-based assembly for integration into drive control racks.
Engineered for compatibility with specific ABB drive series.
Technical Specifications
Manufacturer
ABB
Model
SDCS-PIN-41A
Order Code
3BSE004939R1
Component Type
Pulse Transformer Module
Tariff Code
8537101190
Installation Guidelines
Ensure the drive system is fully de-energized and locked out before attempting to remove or install the module.
Handle the PCB using standard ESD (Electrostatic Discharge) protection practices to prevent damage to sensitive components.
Verify that the module is correctly seated in the designated slot and that all terminal connections are secure before restoring power.
Inspect surrounding components for signs of heat stress or dust accumulation during the replacement process.
Ensure that the replacement module matches the exact order code (3BSE004939R1) to maintain system integrity.
FAQIs this module compatible with all ABB drives?No, the SDCS-PIN-41A is designed for specific ABB drive models. Please verify the part number on your existing module against the 3BSE004939R1 order code before installation.Is this part still in production?No, this module has been discontinued by the manufacturer. We provide these units as spare parts for the maintenance of existing legacy systems.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB CI853A Communication Interface Module
The ABB CI853A, also cataloged as the CI853A Communication Interface Module, operates as a dedicated hardware component for industrial network data exchange within ABB AC 800M and automation system platforms. The module manages communication links between controllers and connected field-level devices through configured industrial protocols.
Hardware Specifications
Parameter
Specification
Model
CI853A
Brand
ABB
Product Type
Communication Interface Module
System Compatibility
ABB AC 800M, Freelance, and 800xA control system environments
Communication Function
Controller-to-field device and subsystem communication interface
Supported Protocols
Protocol support depends on firmware and system configuration, including ABB supported field communication networks
Transmission Speed
Up to 12 Mbps for supported Profibus-based configurations
Power Supply
ModuleBus / backplane powered, typically 24 VDC system supply
Mounting Type
DIN-rail mounting in ABB control cabinets
Indicators
Front LED indicators for power, module status, diagnostics, and communication activity
Protection Class
IP20 cabinet installation requirement
Operating Temp
0 deg C to +55 deg C
Dimensions
Not specified in available technical data
Weight
Not specified in available technical data
Power Consumption
Backplane power consumption depends on system configuration and load conditions
Origin
Sweden
Backplane Bus Communication and Industrial Network Integration
The ABB CI853A uses ABB controller backplane communication mechanisms to exchange configuration data and process information with connected automation components. The module supports deterministic industrial communication behavior through configured firmware functions and network parameters.
Furthermore, ABB automation platforms use firmware-managed communication interfaces to maintain compatibility between controller hardware, I/O subsystems, and engineering tools. The CI853A configuration depends on the installed control system revision, communication protocol selection, and application requirements.
The module supports industrial control architectures where communication interface density and network expansion require coordinated hardware addressing. Therefore, correct firmware compatibility and Control Builder configuration are required before commissioning.
Frequently Asked Questions
Q: Does the CI853A support hot-swap replacement during controller operation?A: Hot-swap capability depends on the ABB control system architecture, controller configuration, and approved module replacement procedures. The installation manual for the specific system revision defines replacement limitations.
Q: How does the CI853A connect to the ABB control system backplane?A: The module connects through the ABB system ModuleBus or controller backplane interface. The backplane provides power distribution and internal communication between installed modules.
Q: What factors affect CI853A communication performance?A: Communication performance depends on protocol selection, network configuration, firmware compatibility, cable installation quality, and connected device loading.
Field Installation Guidelines
Install the CI853A inside an approved ABB control cabinet with IP20 protection requirements.
Mount the module on a compatible DIN rail and verify mechanical locking before wiring.
Confirm module addressing, firmware compatibility, and Control Builder configuration before startup.
Route communication cables separately from high-voltage power cables to reduce electrical interference.
Use proper cable shielding and connect shield layers according to ABB grounding recommendations.
Verify backplane connections and power distribution before applying system voltage.
Check front-panel LED indicators after installation to confirm module status and communication activity.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB AI830A 3BSE040662R1 Analog Input Module - RTD
The ABB AI830A 3BSE040662R1, also cataloged as the AI830A Analog Input Module, provides direct temperature and resistance signal acquisition for ABB S800 I/O systems through RTD and resistive sensor interfaces.
Hardware Specifications
Parameter
Specification
Model
AI830A 3BSE040662R1
Brand
ABB
Product Type
Analog Input Module - RTD
System Platform
ABB S800 I/O
Origin
Sweden
Weight
0.24 kg
Dimensions
4.5 x 10.6 x 11.8 cm
Operating Temp
Not specified
Power Consumption
1.6 W
Signal Specification
3-wire RTD: Pt100, Cu10, Ni100, Ni120 and resistive potentiometer
Number of Channels
8
Resolution
14 Bit
Rated Insulation Voltage
50 V
Dielectric Test Voltage
500 V AC
CMRR at 50 Hz / 60 Hz
>120 dB at 10 ohm load
NMRR at 50 Hz / 60 Hz
>60 dB
Current Consumption +5 V Modulebus
70 mA
Current Consumption +24 V Modulebus
50 mA
Tariff Code
8537101190
Shipment Location
Xiamen, China
ABB S800 I/O Backplane and RTD Signal Processing
The AI830A module connects to the ABB S800 I/O architecture through ModuleBus communication and processes resistance-based sensor signals from field devices. The module supports 8 RTD input channels with 3-wire connection methods for temperature measurement applications.
Furthermore, the input circuits monitor sensor conditions including open circuit, short circuit, and grounded sensor states. The 14 Bit conversion resolution allows the module to provide detailed analog measurement data for controller processing.
The ABB S800 I/O platform uses modular I/O density scaling, allowing AI830A modules to integrate with distributed control configurations through standardized backplane communication. The module operates with defined ModuleBus power consumption values for system load calculation.
Frequently Asked Questions
Q: What type of sensors can the AI830A 3BSE040662R1 process?A: The AI830A processes 3-wire RTD sensors including Pt100, Cu10, Ni100, Ni120, and resistive potentiometer inputs.
Q: How does the AI830A detect field sensor faults?A: The module monitors input conditions and provides detection functions for open circuits, short circuits, and grounded sensor states.
Q: What is the power consumption requirement of the AI830A module?A: The module consumes 70 mA from the +5 V ModuleBus supply and 50 mA from the +24 V ModuleBus supply, with 1.6 W power dissipation.
Field Installation Guidelines
Install the AI830A module within the specified ABB S800 I/O mounting arrangement and verify ModuleBus connection alignment before power application.
Connect RTD sensors using the recommended 3-wire wiring method to reduce lead resistance influence on measurement accuracy.
Separate RTD signal cables from high-voltage power wiring and switching circuits to reduce electrical interference.
Connect cable shields according to the site grounding practice and control system installation standards.
Verify sensor polarity, channel assignment, and field wiring continuity before commissioning.
Confirm ModuleBus power loading remains within the supported system configuration limits.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB AI880A 3BSE039293R1 High Integrity Analog Input Module
Configured for 4-20 mA and 0-20 mA signal acquisition in ABB System 800xA S800 I/O networks, the ABB AI880A 3BSE039293R1 (AI880A High Integrity Analog Input Module) provides direct physical and electrical conversion of field analog signals into controller data.
Hardware Specifications
Parameter
Specification
Model
AI880A 3BSE039293R1
Brand
ABB
Product Type
High Integrity Analog Input Module
Origin
Sweden
Weight
0.15 kg
Dimensions
4.5 x 11 x 11.8 cm (shipping size)
Operating Temp
0 to +55 deg C
Storage Temp
-40 to +70 deg C
Power Consumption
Not specified in provided data
Signal Specification
0-20 mA, 4-20 mA
Number of Channels
8
Signal Type
Unipolar single ended
Resolution
12 bit
Input Impedance
250 Ohm with shunt stick TY801
Maximum Input Voltage
11 VDC non destructive
NMRR
> 40 dB at 50 Hz and 60 Hz
Rated Insulation Voltage
50 V
Dielectric Test Voltage
500 VAC
HART Communication
Supported
Compatible MTU
TU834, TU844, TU845, TU854
ABB S800 I/O Backplane and I/O Density Characteristics
The AI880A operates as an ABB S800 I/O analog acquisition component with eight input channels for current-based field signals. The module communicates through the S800 I/O architecture and supports integration with ABB System 800xA control environments.
The module uses channel-level signal processing for 0-20 mA and 4-20 mA inputs. Furthermore, the 12 bit conversion resolution provides digital representation of measured process values for controller execution.
The ABB I/O platform supports backplane bus communication and I/O density scaling through modular S800 configurations. The AI880A installation requires compatible Module Termination Units, including TU834, TU844, TU845, and TU854, to complete field wiring connections.
Frequently Asked Questions
Q: What input signals does the AI880A 3BSE039293R1 accept?A: The AI880A accepts unipolar single ended analog current inputs with 0-20 mA and 4-20 mA signal ranges.
Q: How many analog input channels are available on the AI880A module?A: The AI880A provides eight analog input channels with 12 bit signal resolution.
Q: Which termination units are compatible with the AI880A?A: The module supports TU834, TU844, TU845, and TU854 Module Termination Units for field signal connection.
Field Installation Guidelines
Install the AI880A module according to ABB S800 I/O mechanical configuration requirements. Verify that the selected Module Termination Unit matches the installed hardware arrangement before connecting field wiring.
Use appropriate shielded signal cables for analog current loops. Connect cable shields according to site grounding practices to reduce electromagnetic interference. Separate low-level analog signal wiring from high-voltage power conductors to minimize coupling noise.
Confirm current loop polarity before commissioning. Check that field transmitters provide signals within the specified input range of 0-20 mA or 4-20 mA before enabling process measurement functions.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB AI893 3BSC690141R1 Analog Input Module
The ABB AI893 3BSC690141R1, also cataloged as the AI893 Analog Input Module, operates as a dedicated hardware component for RTD and thermocouple signal acquisition within ABB S800 I/O systems. The module provides 8 input channels with intrinsic safety interface support for temperature measurement applications.
Hardware Specifications
Parameter
Specification
Model
AI893 3BSC690141R1
Brand
ABB
Product Type
Analog Input Module
Origin
Sweden
Weight
0.2 kg
Dimensions
4.4 x 12.1 x 10.8 cm
Operating Temp
0 to +55 deg C
Storage Temp
-40 to +70 deg C
Power Consumption
Not specified
Input Type
RTD or TC
Number of Channels
8
Resolution
15 bit + sign
Input Impedance
>10 Mohm
Common Mode Voltage Input
+/- 5 V
CMRR at 50 Hz, 60 Hz
>100 dB
NMRR at 50 Hz, 60 Hz
>80 dB
Signal Interface
Intrinsic safety interface
Product Function
Temperature signal input processing
ABB S800 I/O Backplane Integration and Signal Processing
The AI893 module connects to ABB S800 I/O architecture through the standard I/O communication structure and processes field temperature signals from RTD and thermocouple sensors. In addition, the module supports I/O density scaling with 8 measurement channels in a compact hardware format.
The module performs analog signal conversion using 15 bit plus sign resolution. Furthermore, the input stage provides high impedance measurement characteristics and noise rejection performance through common mode and normal mode rejection specifications.
ABB industrial control modules use defined backplane bus communication methods for deterministic data exchange between I/O hardware and controller platforms. The AI893 supports temperature measurement configurations where signal integrity, channel separation, and correct sensor wiring are required.
Frequently Asked Questions
Q: What sensor types can the ABB AI893 3BSC690141R1 accept?A: The AI893 accepts RTD and thermocouple (TC) input signals through its 8 analog input channels with intrinsic safety interface support.
Q: What is the resolution of the AI893 analog measurement input?A: The module provides 15 bit plus sign resolution for analog temperature signal conversion.
Q: Does the AI893 support intrinsic safety field connections?A: Yes. The module includes an intrinsic safety interface for compatible field measurement applications.
Field Installation Guidelines
Install the AI893 module according to ABB S800 I/O system installation procedures and verify the correct module position before power application.
Connect RTD and thermocouple field wiring using suitable industrial instrumentation cables. Maintain proper cable routing separation between analog signal lines and high-voltage power conductors to reduce electrical interference.
For thermocouple applications, verify correct polarity and compensation requirements before commissioning. Ensure shielding practices follow the plant grounding standard and avoid multiple grounding points that may introduce measurement noise.
Check terminal connections, module addressing, and controller configuration before placing the analog input channel into service.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB DI801 Digital Input Module
The ABB DI801 3BSE020508R1, also cataloged as the DI801 Digital Input Module, provides 24 VDC field signal acquisition for S800 I/O systems. The module executes direct electrical input processing through 16 isolated digital channels with channel status indication, filtering selection, and process voltage supervision capability.
Hardware Specifications
Parameter
Specification
Model
DI801 3BSE020508R1
Brand
ABB
Origin
Sweden
Product Type
Digital Input Module
System Platform
ABB S800 I/O
Signal Specification
24 VDC
Number of Channels
16 digital inputs
Signal Type
Current sinking
Input Voltage Range
"0": -30 to +5 V; "1": 15 to 30 V
Input Current
6 mA at 24 VDC
Input Impedance
3.5 kOhm
Isolation
Groupwise isolated from ground
HART Support
No
SOE Support
No
Redundancy
No
High Integrity
No
Intrinsic Safety
No
Filter Times
2 ms, 4 ms, 8 ms, 16 ms selectable
Maximum Field Cable Length
600 m
Rated Insulation Voltage
50 V
Dielectric Test Voltage
500 V
Power Dissipation
Typical 2.2 W
Modulebus +5 V Current Consumption
70 mA
Modulebus +24 V Current Consumption
0
Weight
0.24 kg
Dimensions
86.1 mm W x 58.5 mm D x 110 mm H
Operating Temp
0 to +55 deg C
Storage Temp
-40 to +70 deg C
Protection Class
IP20 according to IEC 60529
ABB S800 I/O Backplane and I/O Density Characteristics
The DI801 operates within the ABB S800 I/O architecture and provides direct digital signal processing through the ModuleBus interface. The module supports I/O density scaling with sixteen input channels integrated into one compact S800L mechanical design.
Each input channel contains current limiting components, EMC protection circuits, LED status indication, and an optical isolation barrier. Therefore, the module separates field signal conditions from internal electronics while maintaining channel-level diagnostic visibility.
The DI801 supports ABB S800 I/O backplane communication functions and maintains compatibility with standard S800 system configurations. Channel 16 can additionally monitor process voltage conditions for group supervision functions.
Frequently Asked Questions
Q: Does the DI801 support redundant input operation?A: No. The DI801 is specified as a non-redundant digital input module and provides one isolated group containing sixteen input channels.
Q: What diagnostic indications are available on the DI801 front panel?A: The module provides an S status LED for run or fault indication and individual channel LEDs for input states from channel 1 to channel 16.
Q: Can the DI801 monitor external process voltage conditions?A: Yes. Channel 16 can be configured as a process voltage supervision input for the input group.
Field Installation Guidelines
Install the DI801 module in an ABB S800 I/O station according to the approved mechanical arrangement. Verify that the module keying, connector alignment, and mounting position match the configured system design.
Connect field wiring according to the specified wire size range. Maintain proper separation between signal wiring and high-voltage conductors to reduce electromagnetic interference.
Use appropriate grounding practices for cabinet installation. Confirm that field cable shielding, EMC protection, and protective earth connections follow the site electrical installation standard.
Before commissioning, verify input polarity, 24 VDC field supply levels, channel LED operation, and process voltage supervision status through the control system diagnostics.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TU847 Module Termination Unit
The ABB TU847 3BSE022462R1, also cataloged as the TU847 Module Termination Unit, provides physical and electrical connection management for redundant CI840/CI840A field communication interface configurations within ABB System 800xA ModuleBus networks.
Hardware Specifications
Parameter
Specification
Model
TU847 3BSE022462R1
Brand
ABB
Product Type
Module Termination Units
Origin
Sweden
Weight
0.5 kg (1.1 lbs)
Dimensions
Width 124 mm, Height 186 mm including latch, Depth 47 mm
Operating Temp
0 to +55 deg C (approved range +5 to +55 deg C)
Power Consumption
24 VDC input, ModuleBus distribution maximum 5 V 1.5 A and 24 V 1.5 A
Communication Protocol
PROFIBUS DP-V1
Configuration Type
Redundant CI840/CI840A, Single I/O
Module Redundancy
Yes
Hot Swap Support
No
Power Input
24 VDC (19.2 to 30 V)
Mounting Orientation
Vertical or Horizontal
Connector Interface
PROFIBUS DSUB9 connector, Service ports RJ45 connector
Mechanical Key Configuration
36 different combinations
Rated Insulation Voltage
50 V
Dielectric Test Voltage
500 VAC
Protection Class
IP20 according to IEC 529
Relative Humidity
5 to 95 %, non-condensing
Storage Temperature
-40 to +70 deg C
Equipment Class
Class I according to IEC 60536, earth protected
Certifications
CE, EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
Hazardous Location Approval
cULus Hazardous Location Class 1 Zone 2, ATEX Zone 2
Marine Certificates
ABS, BV, DNV-GL, LR
ABB ModuleBus Redundant Communication Interface
The TU847 uses ABB ModuleBus architecture to connect two CI840/CI840A communication interface modules in a redundant arrangement. The unit provides dual module positions, dual rotary switches for station address settings from 0 to 99, and electrical ModuleBus connections for distributed I/O communication.
The mechanical key system prevents incorrect module installation. Each position uses two six-position keys, creating 36 configuration combinations for module identification control.
The TU847 supports connection of a ModuleBus Optical Port TB842 through the TB806 adapter. Therefore, optical ModuleBus extension capability can be integrated into the same hardware configuration.
Backplane Bus Communication and I/O Density Scaling
The TU847 operates as a passive connection unit within ABB industrial control platforms. It maintains electrical routing between CI840/CI840A interfaces and the ModuleBus network while supporting redundant communication paths.
The unit applies ABB backplane bus communication architecture for I/O density scaling across System 800xA installations. Additionally, the fixed ModuleBus current distribution limits define the available power capacity for connected communication modules.
Frequently Asked Questions
Q: Does the TU847 support hot swap replacement during system operation?A: No. The TU847 cannot be replaced with power applied. The system power must be removed before mechanical replacement.
Q: Can the TU847 operate with redundant CI840 and CI840A modules?A: Yes. The TU847 is designed for redundant CI840/CI840A communication interface configurations with two module positions.
Q: What installation clearance is required for TU847 removal?A: The TU847 requires available space on the left side to allow removal from the mounting arrangement.
Field Installation Guidelines
Install the TU847 in a vertical or horizontal mounting position according to cabinet layout requirements.
Verify that power is disconnected before removing or replacing the unit.
Confirm mechanical key positions before inserting CI840/CI840A modules.
Route PROFIBUS cables separately from high-voltage power conductors to reduce electrical interference.
Use approved wire sizes from 0.25 to 2.5 mm2 with recommended terminal torque of 0.5 to 0.6 Nm.
Maintain proper protective earth connection according to the equipment Class I installation requirements.
Check ModuleBus connections and station address settings before commissioning.
Ensure environmental conditions remain within the specified operating temperature and humidity limits.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TU844 3BSE021445R1 Redundant Module Termination Unit
The ABB TU844 3BSE021445R1, also cataloged as the TU844 Redundant Module Termination Unit, provides physical signal termination and ModuleBus distribution for ABB S800 I/O modules including AI845, AI880, AI880A, and DP840 configurations.
Hardware Specifications
Parameter
Specification
Model
TU844 3BSE021445R1
Brand
ABB
Product Type
Redundant Module Termination Unit (MTU)
Origin
Sweden
Weight
0.6 kg (1.3 lbs)
Dimensions
Width: 131 mm including connector; Depth: 64 mm including terminals; Height: 186.5 mm including locking device
Operating Temp
0 to +55 deg C (+32 to +131 deg F)
Power Consumption
Passive MTU design; power consumption generated by connected I/O modules
Configuration Type
Redundant
Connection Type
Terminal block
I/O Channels
8
Process Voltage Connections
2 + 2 process voltage connections
Maximum Voltage Rating
50 V per channel
Maximum Current Rating
2 A per I/O channel
Maximum Process Connection Current
5 A
Compatible I/O Modules
AI845, AI880, AI880A, DP840
Mounting Method
Horizontal DIN rail mounting
ModuleBus Distribution
Dual ModuleBus distribution to I/O module and next MTU
Input Selection
Voltage or current input selection through TY801 shunt sticks
Dielectric Test Voltage
500 V AC
Wire Size
Solid: 0.2 - 4 mm2; Stranded: 0.2 - 2.5 mm2, 24 - 12 AWG
Recommended Terminal Torque
0.5 - 0.6 Nm
Wire Stripping Length
7 mm
Protection Class
IP20 according to IEC 60529
Relative Humidity
5 to 95 %, non-condensing
Storage Temperature
-40 to +70 deg C (-40 to +158 deg F)
Pollution Degree
Degree 2, IEC 60664-1
Corrosion Protection
ISA-S71.04 G3
EMC Compliance
EN 61000-6-4, EN 61000-6-2
Electrical Safety Standards
EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
Hazardous Location Certification
C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
Marine Certification
ABS, BV, DNV-GL, LR
RoHS Compliance
EN 50581:2012
WEEE Compliance
Directive 2012/19/EU
ABB S800 I/O ModuleBus Signal Distribution
The TU844 provides electrical termination and routing functions for redundant ABB S800 I/O installations. It distributes two ModuleBuses, with one bus assigned to each I/O module and the outgoing connection extended to the next MTU.
The unit generates module addressing by shifting outgoing position signals through the MTU chain. Therefore, connected I/O modules receive the correct hardware position information without additional software configuration.
The TU844 supports eight I/O channels, where each channel contains two I/O terminals and one ZP connection. Additionally, TY801 individual shunt sticks define the input mode between voltage and current signals. The channel design supports a maximum rated voltage of 50 V and a maximum rated current of 2 A.
The mechanical key system configures compatibility between the MTU and installed I/O modules. Each I/O module position uses two mechanical keys, and each key provides six positions. Therefore, the configuration system supports 36 possible mechanical combinations without changing electrical functionality.
Frequently Asked Questions
Q: What I/O modules can be connected to the ABB TU844 3BSE021445R1?
A: The TU844 supports ABB S800 I/O modules including AI845, AI880, AI880A, and DP840 modules in redundant configurations.
Q: How does the TU844 select voltage or current input signals?
A: The input selection is performed through individual TY801 shunt sticks. The shunt stick defines whether the channel operates with voltage or current input signals.
Q: Can the TU844 be installed on a standard DIN rail?
A: Yes. The TU844 uses horizontal DIN rail mounting and includes a mechanical latch that locks the MTU to the rail.
Field Installation Guidelines
Install the TU844 on a standard DIN rail with the locking mechanism fully engaged before wiring.
Verify that the mechanical key positions match the installed ABB S800 I/O module type before commissioning.
Use approved terminal wiring methods and maintain correct conductor preparation according to the specified wire range.
Separate signal wiring from high-current power cables to reduce electrical interference.
Connect cable shields according to the plant grounding standard when shielded instrumentation wiring is used.
Confirm TY801 shunt stick positions before applying field signals to prevent incorrect voltage or current input configuration.
Inspect ModuleBus connections between adjacent MTUs before system power-up.
Maintain environmental limits for temperature, humidity, pollution degree, and enclosure protection during installation.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TU849 3BSE042560R1 Module Termination Unit
The ABB TU849 3BSE042560R1, also cataloged as the TU849 Module Termination Unit, provides physical termination and power distribution for redundant TB840/TB840A Optical ModuleBus Modem configurations within ABB ModuleBus networks.
Hardware Specifications
Parameter
Specification
Model
TU849 3BSE042560R1
Brand
ABB
Origin
Sweden
Product Type
Module Termination Unit (MTU)
Communication Protocol
ModuleBus
Configuration Type
Redundant TB840/TB840A, Single I/O, Dual Power
Power Input
24 VDC (19.2 to 30 V)
Weight
0.45 kg
Dimensions
124 mm W x 186.5 mm H x 47 mm D
Mounting
Vertical or Horizontal DIN rail mounting
Operating Temp
0 to +55 deg C (approved range +5 to +55 deg C)
Storage Temperature
-40 to +70 deg C
Power Consumption
2.5 W
ModuleBus Current Distribution
Maximum 5 V 1.5 A and 24 V 1.5 A
Line Redundancy
Yes
Hot Swap Support
No
Mechanical Key Configurations
36 selectable combinations
Rated Insulation Voltage
50 V
Dielectric Test Voltage
500 VAC
Protection Class
IP20 according to IEC 60529
Relative Humidity
5 to 95 %, non-condensing
Wire Size Range
Solid and stranded 0.2 to 2.5 mm2, 24 to 12 AWG
Recommended Terminal Torque
0.5 Nm
ABB ModuleBus Redundant Power and I/O Interface Design
The TU849 uses passive electrical routing to connect two TB840/TB840A Optical ModuleBus Modems with individual power supply inputs. The unit provides one electrical ModuleBus connection and supports redundant modem installation for non-redundant I/O configurations.
Furthermore, the MTU integrates a rotary switch for cluster address selection from 1 to 7. Four mechanical keys define module compatibility through 36 selectable hardware configurations. The key positions can be adjusted with a screwdriver to match the installed modem arrangement.
For ABB industrial control platforms, the TU849 supports ModuleBus communication structures where backplane bus communication velocity and I/O density scaling depend on the connected controller and I/O architecture. The passive termination design maintains direct signal routing without internal processing functions.
Frequently Asked Questions
Q: Does the ABB TU849 support hot swap replacement of TB840/TB840A modules?A: No. The TU849 does not provide hot swap capability. Power isolation and system shutdown procedures should be followed before replacing connected modem modules.
Q: What type of power connection does the TU849 provide for redundant modem installation?A: The TU849 provides two separate power supply connections, with one connection assigned to each TB840/TB840A modem position.
Q: How are module compatibility settings configured on the TU849?A: The MTU uses four mechanical keys with six positions each. These settings provide 36 possible hardware configurations and can be adjusted using a screwdriver.
Field Installation Guidelines
Install the TU849 on a standard DIN rail using the integrated mechanical latch. Verify that the latch is correctly locked after mounting to prevent mechanical movement during operation.
Connect the 24 VDC power supply lines according to the assigned modem positions. Maintain correct polarity and separate power routing for each redundant modem connection.
Use approved industrial wiring practices when connecting ModuleBus and power conductors. Keep signal cables separated from high-voltage switching circuits to reduce electrical interference.
Before operation, verify the rotary switch cluster address setting and confirm that the mechanical key configuration matches the installed TB840/TB840A modem type.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TU847 3BSE022462R1 Module Termination Unit
Configured for CI840 module termination and non-redundant I/O support in ABB System 800xA control networks, the ABB 3BSE022462R1 (TU847 Module Termination Unit) provides direct physical connection between CI840 communication interfaces and connected I/O modules.
Hardware Specifications
Parameter
Specification
Model
TU847 3BSE022462R1
Brand
ABB
Origin
Sweden
Weight
0.5 kg
Dimensions
47 mm depth x 186 mm height x 124 mm width
Operating Temp
Not specified by manufacturer
Power Consumption
Passive termination unit; power consumption not specified
Product Type
Module Termination Unit
Compatible Module
CI840 communication interface
Mounting Type
Vertical module mounting
I/O Configuration
Supports non-redundant I/O
Redundancy Configuration
1+1 CI840 configuration support
Included Components
1 pcs Power Supply Connector, 1 pcs TB807 Modulebus Terminator
Protection Compliance
RoHS according to EU Directive 2011/65/EU
WEEE Category
Small Equipment, no external dimension more than 50 cm
Customs Tariff Number
85371098
ABB Industrial Control Bus Integration
The TU847 3BSE022462R1 operates as a passive interface component within ABB System 800xA S800 I/O configurations. Therefore, it provides mechanical termination, power connection routing, and Modulebus termination functions for CI840 communication modules.
The unit supports ABB backplane bus communication structures where module positioning, connector alignment, and termination integrity affect I/O communication stability. Additionally, the included TB807 Modulebus Terminator completes the Modulebus connection path for non-redundant I/O installations.
The TU847 design follows ABB S800 I/O hardware architecture principles, allowing vertical installation of associated modules while maintaining the required electrical interface between the communication module and field I/O assemblies.
Frequently Asked Questions
Q: What ABB module is the TU847 3BSE022462R1 designed to support?A: The TU847 is designed for CI840 communication interface installations and supports 1+1 CI840 configurations with non-redundant I/O operation.
Q: Does the TU847 include termination accessories?A: Yes. The unit includes one Power Supply Connector and one TB807 Modulebus Terminator as specified in the product documentation.
Q: Is the TU847 a powered electronic I/O module?A: No. The TU847 is a Module Termination Unit that provides physical termination and connection functions rather than performing signal processing.
Field Installation Guidelines
Install the TU847 in the specified vertical mounting orientation within the ABB S800 I/O assembly.
Verify that the CI840 interface module is correctly seated before applying system power.
Confirm that the Power Supply Connector is properly installed and mechanically secured.
Install the TB807 Modulebus Terminator according to the Modulebus termination requirements.
Maintain separation between communication wiring and high-voltage power cables to reduce electrical interference.
Connect grounding and shielding according to the control cabinet design and ABB installation requirements.
Inspect connectors for contamination, mechanical damage, or improper engagement before commissioning.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TU890 3BSC690075R1 Compact Terminal Block
Configured for field signal termination and process power connection in ABB S800 I/O systems, the ABB TU890 3BSC690075R1 (TU890 Compact Terminal Block) provides direct physical electrical connection between I/O modules and external field wiring.
Hardware Specifications
Parameter
Specification
Model
TU890 3BSC690075R1
Brand
ABB
Product Type
Compact Terminal Block
Origin
Sweden
Weight
0.22 kg
Dimensions
21 x 6.5 x 8.8 cm
Operating Temp
55 deg C
Power Consumption
Passive terminal connection, no external power consumption
Type
Compact
Connection
Terminal block
Channels
8
Voltage
24 V
Mounting
Horizontal DIN rail mounting
Process Connections
27 blue terminals
Compatible I/O Modules
AI890, AI893, AI895, AO890, AO895, DI890, DO890
Mounting Detail
55 deg mounting orientation
ABB S800 I/O Terminal Interface and I/O Density Scaling
The TU890 provides field wiring termination for ABB S800 I/O modules. It connects process signals, module power interfaces, and ModuleBus-related connections through a compact terminal structure.
Furthermore, the terminal block supports I/O density scaling by allowing compact installation arrangements with compatible AI, AO, DI, and DO modules. The mechanical keying design prevents incorrect module insertion, while the DIN rail latching mechanism maintains fixed positioning during operation.
The ABB S800 architecture uses structured backplane and ModuleBus communication paths. Therefore, correct terminal assignment and module compatibility verification are required before installation.
Frequently Asked Questions
Q: Which ABB I/O modules are compatible with the TU890 3BSC690075R1?A: The TU890 is specified for use with ABB AI890, AI893, AI895, AO890, AO895, DI890, and DO890 I/O modules.
Q: Does the TU890 require an external power supply?A: No. The TU890 is a passive terminal block and does not require an independent power input.
Q: What mounting method does the TU890 use?A: The TU890 uses horizontal DIN rail mounting with an integrated latching device for mechanical retention.
Field Installation Guidelines
Install the TU890 on a correctly positioned DIN rail according to the cabinet mechanical layout.
Verify terminal assignments before connecting field wiring to avoid incorrect signal routing.
Keep field signal cables separated from high-current power conductors to reduce electrical interference.
Connect cable shields according to the control cabinet grounding design and applicable site standards.
Confirm that the installed I/O module type matches the terminal block compatibility list before energizing the system.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB TB820V2 3BSE013208R1 Modulebus Optical Modem
Configured for optical Modulebus communication extension in ABB S800 I/O systems, the ABB TB820V2 3BSE013208R1 (TB820V2 Modulebus Optical Modem) provides direct physical data transmission between Modulebus segments through optical interfaces.
Hardware Specifications
Parameter
Specification
Model
TB820V2 3BSE013208R1
Brand
ABB
Product Type
Modulebus Optical Modem
Origin
Sweden
Weight
0.34 kg
Dimensions
17 x 5.8 x 12 cm
Communication Interface
Modulebus optical interface
Application Platform
ABB S800 I/O system
Function
Optical Modulebus segment extension and adapter module
Backplane Bus Communication and I/O Network Integration
The TB820V2 operates as an optical communication interface within ABB industrial control architectures. Therefore, it transfers Modulebus communication signals through optical media to extend physical separation between connected I/O clusters.
The unit supports ABB Modulebus network configurations where optical transmission is required. In addition, the optical interface reduces electrical coupling between separated hardware sections and supports distributed I/O installation layouts.
The TB820V2 belongs to ABB industrial control hardware designed around backplane bus communication velocity management and I/O density scaling. It integrates with ABB S800 I/O components through the defined Modulebus architecture without providing independent control processing functions.
Frequently Asked Questions
Q: What is the primary function of the ABB TB820V2 3BSE013208R1?A: The TB820V2 functions as a Modulebus Optical Modem that converts and transfers Modulebus communication signals through optical media between compatible ABB system sections.
Q: Does the TB820V2 operate as a standalone controller module?A: No. The TB820V2 is a communication interface component and does not execute user application logic or control algorithms.
Q: What system platform uses the TB820V2 Modulebus Optical Modem?A: The TB820V2 is designed for ABB S800 I/O system configurations requiring optical Modulebus communication extension.
Field Installation Guidelines
Install the TB820V2 according to ABB S800 I/O system hardware configuration requirements.
Verify optical cable compatibility before connecting the Modulebus optical interface.
Route optical communication cables separately from high voltage power wiring to minimize installation interference.
Ensure all mounting connections maintain proper mechanical fixation inside the control cabinet.
Confirm system power isolation before removing or installing the module.
Check connector alignment before applying system power after installation.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
