ABB menawarkan solusi otomasi industri untuk penggerak, sistem kontrol, dan robotika. Inventaris global kami memastikan akses cepat ke suku cadang yang sulit ditemukan. Kurangi waktu henti dan pertahankan produksi berkelanjutan dengan komponen ABB yang terverifikasi.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB CI801 3BSE022366R1 PROFIBUS DP-V1 Communication Interface Module
The ABB CI801 3BSE022366R1, also cataloged as the CI801 PROFIBUS DP-V1 Communication Interface Module, provides configurable communication and I/O management for the ABB S800 I/O system. It connects the controller to distributed I/O through PROFIBUS-DPV1 and supports signal processing, supervision data collection, OSP handling, Hot Configuration InRun, HART pass-through, and I/O module configuration.
Hardware Specifications
Parameter
Specification
Model
CI801 3BSE022366R1
Spare Model
3BSE022366R1
Brand
ABB
Product Type
PROFIBUS DP-V1 Communication Interface Module
Series
S800 I/O
Origin
Sweden
Weight
0.25 kg
Dimensions
Estimated shipping size: 13.6 x 9.2 x 5.5 cm
Operating Temp
0 to +55 deg C
Storage Temp
-40 to +70 deg C
Relative Humidity
5 to 95 %, non-condensing
Nominal Supply Voltage
24 VDC
Supply Voltage Range
19.2 to 30 VDC
Typical Current Consumption
140 mA at 24 VDC
Power Dissipation
5.4 W
I/O Module Supply
24 VDC, maximum 1.5 A, fused
I/O Logic Supply
5 VDC, maximum 1.5 A, current limited
Input Power Protection
2 A fuse
PROFIBUS Interface
9-pin D-sub connector
Optical ModuleBus Connection
Supported through TB806/TB842 modems
Marine Certificates
ABS, BV, DNV-GL, LR
PROFIBUS-DPV1 and S800 I/O Communication
The CI801 uses PROFIBUS-DPV1 as the fieldbus connection between the controller and the S800 I/O network. It manages I/O module configuration while processing signals and collecting supervision information.
In addition, the module supports OSP handling, Hot Configuration InRun, and HART pass-through functions. The communication path can also extend to the Optical ModuleBus through compatible TB806 or TB842 modems.
The CI801 supplies isolated power to connected I/O modules. It provides 24 VDC at up to 1.5 A with fused protection and 5 VDC at up to 1.5 A with current limiting. Therefore, field wiring and module power distribution remain separated from the communication processing functions.
Frequently Asked Questions
Q: What fieldbus does the CI801 3BSE022366R1 use for controller communication?A: The CI801 connects to the controller through PROFIBUS-DPV1 using its 9-pin D-sub interface.
Q: What supply voltage does the CI801 require?A: The module uses a nominal 24 VDC supply and accepts an input range of 19.2 to 30 VDC. Typical current consumption is 140 mA at 24 VDC.
Q: Can the CI801 connect to the Optical ModuleBus?A: Yes. The CI801 supports Optical ModuleBus connection through TB806 or TB842 modems.
Field Installation Guidelines
Verify that the installation location remains within the specified operating temperature and humidity range.
Provide a nominal 24 VDC supply within the specified 19.2 to 30 VDC input range.
Connect PROFIBUS-DPV1 through the designated 9-pin D-sub interface.
Route PROFIBUS communication wiring separately from high-current and high-noise power conductors where practical.
Maintain correct PROFIBUS cable shielding and grounding practices according to the installed network design.
Check the 2 A input fuse and the specified module power requirements before energizing the assembly.
When using Optical ModuleBus communication, connect the applicable TB806 or TB842 modem according to the system configuration.
Confirm the connected I/O module power load remains within the stated 24 VDC and 5 VDC output limits.
Inspect connectors, shielding, and terminal interfaces before commissioning.
Verify PROFIBUS communication and I/O supervision status after power-up.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB CI870K01 VIP Communication Interface
Configured for VIP data communication in the AC 800M controller environment, the ABB CI870K01 (CI870 VIP Communication Interface) provides two Ethernet ports for TCP/IP and UDP/IP based communication. The package includes the CI870 interface module and its TP853 baseplate. ABB identifies CI870K01 as the replacement for CI861. (ABB Library)
Hardware Specifications
Parameter
Specification
Model
CI870K01
Base Module
CI870
Product Type
VIP Communication Interface
Brand
ABB
Article Number
3BSE088499R1
System Compatibility
AC 800M / AC 800PEC
Communication Function
VIP communication
Network Ports
2 Ethernet ports
Network Protocols
TCP/IP and UDP/IP based VIP communication
Package Contents
CI870 VIP Interface Module + TP853 Baseplate
Mounting
System baseplate installation
Dimensions
59 mm W x 185 mm H x 127.5 mm D
Weight
0.5 kg
Origin
United States or Sweden, depending on product record
The 59 mm x 185 mm x 127.5 mm dimensional data and 0.5 kg net weight correspond to the listed CI870K01 product configuration. (Quad Industry)
ABB VIP Ethernet Communication
The CI870 provides a dedicated VIP communication interface with two Ethernet ports. The interface supports TCP/IP and UDP/IP based VIP communication between AC 800M or AC 800PEC controllers and compatible VIP-enabled equipment. Therefore, the module handles Ethernet data exchange rather than discrete or analog I/O signal conditioning. (ABB Library)
The CI870K01 package also includes the TP853 baseplate. Consequently, installation requires the corresponding controller-side hardware arrangement rather than direct field wiring to conventional I/O channels. (Quad Industry)
Frequently Asked Questions
Q: What communication function does the CI870K01 provide?A: It provides VIP communication through two Ethernet ports and supports TCP/IP and UDP/IP based VIP data exchange. (ABB Library)
Q: Does the CI870K01 provide analog or digital I/O channels?A: No. The CI870K01 is a communication interface. It does not function as an analog input, analog output, digital input, or digital output module.
Q: What is included in the CI870K01 package?A: The package includes the CI870 VIP Interface Module and TP853 baseplate. (Quad Industry)
Field Installation Guidelines
Install the CI870 module on the specified TP853 baseplate and secure the assembly according to ABB installation procedures.
Verify the controller hardware configuration before applying system power.
Route Ethernet communication cables separately from high-voltage power and high-current switching conductors where practical.
Maintain appropriate cable shielding and bonding practices for the installed Ethernet network.
Check Ethernet connector seating and cable condition before commissioning.
Confirm the configured VIP communication parameters at the controller and connected equipment.
Do not apply unverified field wiring or external supply voltages to the communication interface.
For replacement work, verify the controller firmware and system software compatibility before removing the existing communication module.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB CMA121 (3DDE300401) is a Synpol D series DC power supply module designed for reliable power conversion in industrial control environments. This module provides a stable, regulated output voltage, ensuring consistent performance for sensitive electronic components within the ABB control system architecture.Features
Compact design optimized for industrial cabinet integration.
Regulated 5 V DC output with high precision.
Wide input voltage tolerance to accommodate fluctuations in 24 V DC supply lines.
Low ripple and noise characteristics for stable operation of sensitive logic circuits.
Robust isolation between input and output stages.
ApplicationsThis power supply module is typically utilized in industrial automation systems, specifically within ABB Synpol D control configurations, to provide auxiliary power to I/O racks, communication interfaces, or localized control logic boards.Technical Specifications
Product Model
CMA121 (3DDE300401)
Input Voltage Range
18 V DC to 32 V DC (24 V DC nominal)
Output Voltage
5 V DC +/- 1%
Max Output Current
4 A
Power Output
Up to 20 W
Ripple and Noise
< 50 mV peak-to-peak
Isolation
500 V DC (Input to Output)
Operating Temperature
0 degC to +60 degC
Storage Temperature
-40 degC to +85 degC
Relative Humidity
5% to 95% (non-condensing)
Installation Guidelines
Ensure the module is mounted in a clean, dry environment with adequate ventilation to maintain operating temperatures within the specified range.
Verify that the input power source is within the 18-32 V DC range before connecting to the module terminals.
Use appropriate wire gauges for the input and output connections to minimize voltage drop.
Ensure proper grounding of the module chassis to the cabinet earth bus to minimize electromagnetic interference (EMI).
Always power down the system before inserting or removing the module to prevent electrical arcing or damage to the connector pins.
FAQWhat is the primary function of the CMA121 module?The CMA121 is a DC-to-DC power supply module designed to convert a 24 V DC input into a regulated 5 V DC output, specifically for use within ABB Synpol D systems.Can this module be used in high-temperature environments?The module is rated for operation between 0 degC and +60 degC. For installations exceeding these limits, additional cooling or climate control within the enclosure is required.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ProSoft MVI46-MCM is a high-performance communication module designed to allow Rockwell Automation SLC 500 processors to interface seamlessly with Modbus protocol-compatible devices. Acting as an input/output module between the Modbus network and the Allen-Bradley backplane, it facilitates asynchronous data exchange. The module features a 5000-word register space for efficient data transfer, supporting both Master and Slave configurations across its communication ports.Features
Dual-port interface supporting RS-232, RS-422, or RS-485 physical layers.
Configurable as a Modbus Master or Slave device.
Supports up to 100 commands per port in Master mode.
Optimized polling characteristics to manage communication with problematic slave nodes.
Direct ladder logic control for command execution.
Single-slot module design for Allen-Bradley 1746 chassis.
Applications
SCADA system integration and data concentration.
Pulp and paper mill process control and motor drive management.
Mining and heavy material handling, including conveyor and crushing equipment.
Burner and boiler management systems.
Food and beverage processing, including weigh scales and temperature controllers.
Automotive manufacturing, including robotic welding and CNC station monitoring.
Technical Specifications
Product Model
MVI46-MCM
Manufacturer
ProSoft Technology
Backplane Current Load
800 mA at 5.1 VDC
Operating Temperature
0 to 60 degC (32 to 140 degF)
Storage Temperature
-40 to 85 degC (-40 to 185 degF)
Relative Humidity
5 to 95% (non-condensing)
Vibration
5 g from 10-150 Hz
Module Width
Single slot
Compatible Rack
Allen-Bradley 1746 chassis
Installation Guidelines
Ensure the SLC 500 processor is powered down before inserting or removing the module from the chassis.
The module must be installed in a local or extended I/O rack (0-3) of the SLC 500 system; it does not support remote I/O rack installation.
Use appropriate shielded cabling for RS-422/485 connections to minimize EMI interference.
Ensure proper grounding of the chassis to maintain signal integrity.
Follow standard ESD precautions when handling the module to prevent damage to internal circuitry.
FAQsWhat is the MVI46-MCM?The ProSoft Technology MVI46-MCM is a Modbus Communication Module for Allen-Bradley SLC 500 systems, supporting Master or Slave protocols on two configurable serial ports.Can the MVI46-MCM be placed in a remote rack?No, it must reside in the local or extended I/O rack (0-3) of the SLC 500 system.What is the difference between MVI46-MCM and 3150-MCM?The MVI46-MCM is a faster, modern module supporting up to 115.2 kbps and 100 commands per port, whereas the 3150-MCM is a legacy version with lower performance specifications.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB 07 AI 91 (GJR5251600R4202) is a high-performance analog input module designed for integration into the CS31 system bus. This remote module features 8 configurable analog input channels, providing versatile measurement capabilities for industrial automation environments. It is engineered to handle a wide variety of signal types, including temperature sensors and voltage inputs, with integrated linearization for specific sensor types.Features
8 configurable analog input channels, programmable in pairs.
Supports voltage inputs (± 10 V, ± 5 V, ± 500 mV, ± 50 mV).
Supports current inputs (4...20 mA or 0...20 mA with external 250 Ohm resistor).
Compatible with Pt100/Pt1000 RTDs and J, K, S type thermocouples with internal linearization.
12-bit plus sign resolution for high-precision signal processing.
Electrically isolated CS31 system bus connection for enhanced noise immunity.
Integrated diagnostic functions with automatic self-calibration for all channels.
DIL switch configuration for module addressing and channel settings.
ApplicationsThe 07 AI 91 is primarily utilized in distributed control systems (DCS) and PLC architectures where remote data acquisition is required. It is ideal for monitoring process temperatures, pressure transmitters, and other analog field instrumentation in manufacturing, power generation, and process control facilities.Technical Specifications
Model
07 AI 91
Order Code
GJR5251600R4202
Channels
8
Supply Voltage
24V DC
Resolution
12-bit + sign
Operating Temperature
0 degC to +55 degC
Storage Temperature
-25 degC to +75 degC
Protection Rating
IP20
Mounting
DIN rail (TH35-15, TH35-7.5)
Installation Guidelines
Ensure the power supply is disconnected before installing or removing the module from the DIN rail.
Mount the module on a standard TH35-15 or TH35-7.5 DIN rail according to IEC 60715 standards.
Maintain adequate clearance around the module to ensure proper ventilation and cooling within the control cabinet.
Use shielded cables for analog signal connections to minimize EMI interference; ensure the shield is properly grounded.
Ensure that only electrically isolated sensors are connected to the input channels to prevent ground loops.
Configure the module address and input types using the physical DIL switches before commissioning.
FAQWhat is the primary function of the 07 AI 91 module?The 07 AI 91 is a remote analog input module for the CS31 system bus, used to collect and digitize analog signals from sensors like thermocouples, RTDs, and voltage/current transmitters.Can this module measure 4-20 mA signals?Yes, the module can measure 4-20 mA or 0-20 mA signals by utilizing an external 250 Ohm resistor connected in parallel with the input channel.How is the module configured?The module address and input channel configurations are set manually using the DIL switches located on the unit.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB Bailey Infi 90 NTCF23 is a specialized termination unit designed to facilitate communication within the INFI-Net control system. This module serves as an electric-to-optic interface, enabling reliable signal conversion for fiber optic network integration. It is engineered to support the robust communication requirements of the Infi 90 distributed control environment.Features
Designed for INFI-Net electric-to-optic signal conversion.
Provides reliable termination for fiber optic communication links.
Compatible with legacy Bailey Infi 90 control system architecture.
Robust hardware construction for industrial control room or cabinet deployment.
ApplicationsThis termination unit is primarily utilized in power generation, water treatment, and heavy industrial processing plants that rely on the Bailey Infi 90 platform. It is essential for extending communication distances and reducing electromagnetic interference (EMI) by utilizing fiber optic transmission media between control nodes.Technical Specifications
Model
NTCF23
Manufacturer
ABB
Function
Electric-to-Optic Termination Unit
System Compatibility
Bailey Infi 90 / INFI-Net
Weight
2.25 kg
Tariff Code
8537101190
Installation Guidelines
Ensure the control system is powered down before installing or removing the NTCF23 module to prevent electrical damage.
Mount the unit in a clean, dry, and climate-controlled environment consistent with standard industrial cabinet requirements.
Handle fiber optic connectors with care; ensure they are clean and free of debris before insertion to maintain signal integrity.
Verify that all electrical terminations are secure and that the fiber optic cables are routed with appropriate bend radii to avoid signal attenuation.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect internal circuitry.
FAQWhat is the primary function of the NTCF23?The NTCF23 acts as a bridge in the INFI-Net system, converting electrical signals to optical signals for fiber optic communication, which helps in maintaining signal quality over longer distances.Is this module compatible with other control systems?The NTCF23 is specifically designed for the ABB Bailey Infi 90 system. It is not intended for use with non-Bailey or modern non-compatible control platforms.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB PM860K01 is a high-performance processor unit kit designed for the Advant AC 800M control system. This kit serves as a central processing component, providing robust computing power for demanding industrial automation and process control applications. The PM860 unit is engineered to support complex control logic, high-speed communication, and reliable data processing within the AC 800M architecture.Features
Central processing unit designed for the AC 800M controller series.
Includes baseplate for secure mounting and integration into the control cabinet.
Supports scalable automation solutions for various industrial environments.
Designed for high availability and consistent performance in process control tasks.
Technical Specifications
Model Number
PM860K01
Spare Part Number
3BSE018100R1
Manufacturer
ABB
Product Type
Processor Unit Kit
Weight
0.92 kg
Tariff Code
85389091
Installation Guidelines
Ensure the control system is powered down before installing or removing the processor unit to prevent electrical damage.
Mount the baseplate securely onto a standard DIN rail or panel as per the system layout requirements.
Verify that all physical connections to the baseplate are clean and free of debris to ensure reliable signal integrity.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect internal circuitry.
Maintain adequate ventilation around the controller to prevent overheating during continuous operation.
FAQIs the PM860K01 still in production?No, this model has been discontinued by the manufacturer. We provide these units as reliable spare parts for existing AC 800M installations.What is included in the PM860K01 kit?The kit typically includes the PM860 processor unit and the necessary baseplate for mounting.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB ICSC08L1 is a remote I/O unit designed for the Procontic CS31 automation system. This module facilitates distributed input and output operations, allowing for efficient signal processing in industrial control environments. Although this unit is now discontinued by the manufacturer, it remains a critical component for maintaining legacy Procontic CS31 installations.Features
Designed for integration within the ABB Procontic CS31 fieldbus architecture.
Supports 24 Vdc operation for reliable I/O signal handling.
Compact hardware footprint suitable for space-constrained control cabinets.
Compatible with legacy ABB automation infrastructure.
Technical Specifications
Model
ICSC08L1
Spare Model / Order Code
FPR3319101R1082
System Series
Procontic CS31
Supply Voltage
24 Vdc
Manufacturer
ABB
Weight
0.28 kg
Tariff Code
8538907080
Installation Guidelines
Ensure the control system power is fully disconnected before installing or removing the I/O unit to prevent electrical damage.
Mount the unit in a clean, dry environment, ensuring adequate ventilation to prevent overheating.
Verify that all wiring connections are secure and follow local electrical codes for industrial control equipment.
Use shielded cabling where necessary to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Handle the module using proper ESD (Electrostatic Discharge) precautions to protect internal circuitry.
FAQIs the ICSC08L1 still in production? No, this unit has been discontinued by ABB. It is primarily available through secondary market channels or as a refurbished spare.What is the primary function of this module? The ICSC08L1 acts as a remote I/O interface for the Procontic CS31 system, enabling the controller to communicate with field devices located away from the main processor.Can I use this as a direct replacement for other CS31 modules? You should verify the specific part number and system configuration requirements. The spare model number associated with this unit is FPR3319101R1082.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB SDCS-UCM-1C (3ADT220090R0008) is a specialized measurement and resistor board designed for use with ABB DCS880 and DCS800 thyristor power converters. This component is specifically engineered for drive frame sizes H1 through H5, where standard internal DC voltage measurement integration may be insufficient for complex configurations such as those utilizing DC-breakers or US-style DC-contactors.Features
Enables external DC voltage measurement directly at the motor terminals for H1 to H5 frame sizes.
Features two integrated resistor chains for effective voltage reduction.
Designed for external mounting outside the primary drive module.
Includes dual DC voltage terminal connections (X1 and X2) for flexible wiring based on nominal motor voltage.
Facilitates accurate voltage feedback to the drive's analog input (AI3) even when DC-breakers are open.
Applications
Industrial Cranes & Hoists: Support for port, overhead, and shipyard crane winches.
Conveyor Systems: Reliable control for overland bulk material transport.
Rolling Mills: High-torque variable-speed control for hot and cold milling processes.
Wire Drawing Machines: Maintaining continuous tension during metal processing.
Cable Cars & Ski Lifts: Ensuring smooth acceleration and fail-safe deceleration.
Technical Specifications
Model
SDCS-UCM-1C
Order Code
3ADT220090R0008
Manufacturer
ABB
Function
Measurement / Resistor Board
Operating Temperature
-40 degC to +70 degC
Storage Temperature
-50 degC to +85 degC
Humidity
5-95% RH (condensing)
Tariff Code
8537101190
Installation Guidelines
Cable Selection: Always utilize twisted, shielded pair cables for instrumentation feedback lines to minimize electromagnetic interference (EMI).
Ground Routing: Connect the board’s protective earth (PE) terminal directly to the main drive chassis ground plane.
Segregation: Maintain high-ohmic segregation by keeping high-voltage resistor measurement paths physically separate from low-voltage control or communication cables.
Mounting: Ensure the board is securely mounted in an environment protected from excessive dust and moisture, following the specific clearance requirements for the drive cabinet.
FAQWhat is the primary function of the SDCS-UCM-1C board?The SDCS-UCM-1C acts as a measurement and resistor interface. It allows the drive to obtain an accurate DC voltage measurement from the motor terminals, which is then fed into the drive's analog input (AI3) for closed-loop regulation, particularly useful when a contactor or breaker is installed between the drive and the motor.Which drive series is this board compatible with?This board is primarily designed for the ABB DCS880 and DCS800 series thyristor power converters, specifically for frame sizes H1 through H5.Why is this board necessary for H1-H5 frame sizes?In these specific frame sizes, the DC voltage measurement is integrated into the internal control board. If a DC-breaker or contactor is opened, the internal measurement cannot see the motor voltage. The SDCS-UCM-1C provides an external measurement path that remains active regardless of the state of the DC-breaker.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB SDCS-POW-1 (3ADT220090R0003) is a dedicated power supply board designed for use within ABB industrial drive systems. This module provides essential regulated voltage outputs required for the operation of control electronics and peripheral components within the drive architecture.Features
Reliable power conversion for industrial drive control systems.
Multiple output rails to support diverse internal circuitry.
Designed for integration within specified ABB drive hardware.
Robust construction suitable for demanding industrial environments.
Technical Specifications
Product Model
SDCS-POW-1
Order Code
3ADT220090R0003
Input Voltage
24 V DC
Output Voltages
+5 V DC, ±15 V DC, +24 V DC
Output Current
5-15 A
Power Rating
50-150 W (typical)
Operating Temperature
-20 degC to +70 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% RH (non-condensing)
Installation Guidelines
Ensure the drive system is fully de-energized and locked out before attempting to install or remove the power supply board.
Handle the board using proper ESD (Electrostatic Discharge) precautions to prevent damage to sensitive electronic components.
Verify that all cable connections are secure and seated correctly in their respective terminals.
Ensure adequate ventilation around the drive cabinet to maintain operating temperatures within the specified range.
Check for proper grounding of the module to minimize electromagnetic interference (EMI) and ensure system stability.
FAQWhat is the primary function of the SDCS-POW-1?This module acts as a power supply unit, converting 24 V DC input into the various regulated DC voltages required by the drive's control logic and auxiliary circuits.Is this part compatible with other drive series?The SDCS-POW-1 is specific to certain ABB drive configurations. Please verify your drive's hardware manual or the original part number (3ADT220090R0003) against your existing module before installation.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB Bailey NIDS01 is a Digital Station Interface Module designed for the INFI 90 distributed control system. This module serves as a critical termination component, facilitating the reliable connection and signal processing of digital points within the control network. It is engineered to provide robust interface capabilities for digital station operations in industrial automation environments.Features
Designed specifically for integration within the Bailey INFI 90 control architecture.
Supports high-density digital point connectivity for station monitoring and control.
Provides galvanic isolation to protect sensitive control circuitry from field-side electrical disturbances.
Optimized for low power consumption while maintaining high operational reliability.
Wide operating temperature range suitable for demanding industrial facility conditions.
Technical Specifications
Product Model
NIDS01
Function
Digital Station Interface / Termination Module
Power Supply
24 V DC
Power Consumption
3-8 W (typical)
Isolation
1500 V AC
Digital Channels
16-32 points
Operating Temperature
-20 degC to +70 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% RH (non-condensing)
Installation Guidelines
Ensure the control system power is fully disconnected before installing or removing the NIDS01 module to prevent electrical damage.
Mount the module in a clean, dry, and vibration-free environment, ensuring adequate airflow for heat dissipation.
Verify that all field wiring is securely terminated and properly shielded to minimize electromagnetic interference (EMI).
Adhere to standard ESD (Electrostatic Discharge) handling procedures when touching the module components.
Confirm that the 24 V DC power supply is stable and within the specified operating limits before system startup.
FAQWhat is the primary function of the NIDS01 module?The NIDS01 is a Digital Station Interface/Termination module used within the ABB Bailey INFI 90 system to manage and interface digital signal points between field devices and the control system.Is this module compatible with other control systems?The NIDS01 is specifically engineered for the Bailey INFI 90 series. It is not intended for use in non-compatible control architectures.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB YPQ108A (YT204001-DT) is a specialized I/O board designed for integration within ABB Advant OCS and Advant-800xA control systems. This module serves as a critical interface component, providing robust signal processing and connectivity for industrial automation environments. It features a resistive network configuration to support precise signal conditioning and reliable data acquisition.Features
Integrated resistive network for signal conditioning.
High-density I/O configuration for versatile control applications.
Galvanic isolation between channels and the system bus to enhance noise immunity.
Designed for compatibility with ABB Advant OCS and 800xA system architectures.
Technical Specifications
Model
YPQ108A (YT204001-DT)
Manufacturer
ABB
Digital I/O
32 digital channels
Analog I/O
8 differential +/- 10 V inputs
Relay Outputs
8 form-C contacts
Galvanic Isolation
500 V dc channel-to-bus
Power Supply
24 V dc
Operating Temperature
0 to +55 degC
Storage Temperature
-40 to +85 degC
Installation Guidelines
Ensure the control system is powered down before installing or removing the I/O board.
Handle the module using ESD-safe procedures to prevent damage to sensitive electronic components.
Verify that the module is securely seated in the designated rack slot and that all locking mechanisms are engaged.
Ensure proper grounding of the cabinet to minimize electromagnetic interference (EMI).
Route signal cables away from high-voltage power lines to maintain signal integrity.
Maintain adequate ventilation within the cabinet to ensure the module operates within the specified temperature range.
FAQWhat systems are compatible with the YPQ108A?The YPQ108A is engineered for use with ABB Advant OCS and Advant-800xA control systems.What is the primary function of the resistive network on this board?The resistive network is utilized for signal conditioning, ensuring that input signals are correctly scaled and protected before being processed by the system controller.Does this module require external power?Yes, the module operates on a 24 V dc power supply, which must be provided according to the system's power distribution specifications.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB DSDP160 (57160001-KG) is a high-performance pulse counter board designed for integration within the Advant S100 I/O system. This module is engineered for precise pulse counting applications in industrial automation environments, providing reliable data acquisition for 800xA and Advant control systems. It is built to handle standard industrial 24V DC control voltages, ensuring seamless compatibility with existing S100 I/O infrastructure.Features
Designed for Advant S100 I/O and 800xA control system architectures.
Supports a maximum pulse frequency of 10 kHz for high-speed counting tasks.
Minimum pulse width capability of 50 microseconds.
Nominal operating voltage of 24V DC with a functional range of 20V to 30V DC.
Typical current consumption of 0.5 A at 24V DC.
Technical Specifications
Product Model
DSDP160
Order Code
57160001-KG
Manufacturer
ABB
Function
Pulse Counter Board
Nominal Voltage
24V DC
Input Voltage Range
20V to 30V DC
Max Pulse Frequency
10 kHz
Min Pulse Width
50 us
Power Consumption
10-15W (approx.)
Typical Current
0.5 A at 24V DC
Installation Guidelines
Ensure the control system power is disconnected before installing or removing the DSDP160 module from the S100 I/O rack.
Verify that the module is securely seated in the designated slot to ensure proper backplane communication.
Use shielded cabling for pulse input signals to minimize electromagnetic interference (EMI) and ensure signal integrity.
Maintain proper ventilation within the cabinet to prevent thermal stress on the module components.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching the board or its connectors.
FAQWhat is the primary function of the DSDP160 module?The DSDP160 is a dedicated pulse counter board used to interface pulse-generating field devices with the ABB Advant S100 I/O system.Is this module compatible with the 800xA system?Yes, this module is designed for use within the Advant control system family, which integrates with the 800xA environment.What is the maximum frequency this counter can handle?The module supports a maximum pulse frequency of 10 kHz.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB DSTD110A (57160001-TZ) is a digital output connection unit designed for use within the ABB Master control system architecture. This module serves as a high-density interface for digital output signals, providing robust signal distribution and termination for industrial automation applications.Features
32-channel digital output capacity for high-density control requirements.
Supports a maximum output voltage of 60 V DC per channel.
Robust current handling with a capacity of 3 A per channel.
Total unit continuous current rating of 10 A.
Galvanic isolation of 500 V DC between channels and the system bus to ensure signal integrity and protection.
Wide operating temperature range suitable for harsh industrial environments.
Technical Specifications
Product Model
DSTD110A 57160001-TZ
Channels
32 Digital Outputs
Max Output Voltage
60 V DC per channel
Max Current per Channel
3 A
Total Unit Current
10 A continuous
Isolation
500 V DC channel-to-bus
Operating Temperature
-25 degC to +70 degC
Storage Temperature
-40 degC to +85 degC
Relative Humidity
5 - 95 % RH (non-condensing)
Installation Guidelines
Ensure the system power is completely disconnected before installing or removing the DSTD110A module.
Mount the unit in a clean, dry environment, ensuring adequate ventilation to maintain operating temperatures within the specified range.
Use shielded cables for signal wiring to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Verify that all field wiring connections are secure and properly torqued to prevent intermittent signal loss.
Handle the module using proper electrostatic discharge (ESD) prevention techniques to avoid damage to internal components.
FAQWhat is the primary function of the DSTD110A?The DSTD110A is a digital output connection unit used to interface field devices with the ABB Master control system, managing up to 32 digital output channels.Can this module be used in extreme temperatures?The module is rated for an operating temperature range of -25 degC to +70 degC, making it suitable for most standard industrial control room and cabinet environments.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB SB512 (3BSE002098R1) is a dedicated power supply module designed for use within the Advant S100 I/O system. This module provides reliable power conversion and distribution, ensuring stable operation for connected I/O components in industrial automation environments.Features
Designed specifically for compatibility with Advant S100 I/O racks.
Supports a wide range of input voltages to accommodate various industrial power architectures.
Engineered for high efficiency and low ripple, maintaining signal integrity for sensitive I/O modules.
Robust construction suitable for demanding industrial temperature ranges.
ApplicationsThis power supply is primarily utilized in ABB Advant OCS and S100 I/O configurations, providing field power to distributed I/O stations in process control, power generation, and manufacturing automation systems.Technical Specifications
Product Model
SB512 / 3BSE002098R1
Manufacturer
ABB
Input Voltage
110-230 VAC/DC
Output Voltage
10-24 VDC
Output Current
1 A
Operating Temperature
-25 degC to +70 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% RH (non-condensing)
Altitude
Up to 2000 meters
Installation Guidelines
Ensure the power supply is installed in a clean, dry environment within an industrial enclosure.
Verify that the input voltage matches the module specifications before applying power.
Maintain proper ventilation around the module to prevent heat buildup, adhering to the specified operating temperature limits.
Use appropriate wire gauges for input and output connections to minimize voltage drop and ensure secure terminal contact.
Always disconnect power before inserting or removing the module from the I/O rack to prevent electrical damage or arcing.
Ensure the module is securely seated in the rack and properly grounded to minimize electromagnetic interference (EMI).
FAQIs the SB512 compatible with other Advant I/O systems?The SB512 is specifically designed for the Advant S100 I/O series. Please verify your system documentation or part number compatibility before installation.What is the primary function of this module?The SB512 serves as a power supply unit, converting primary supply voltages into the required DC levels for field I/O operations within the S100 system.
DescriptionThe ABB GHV0360875R0035 (also identified by spare model 810-281670-004) is a specialized drive board card designed for use within ABB drive and servo systems. This component is engineered to facilitate reliable signal transmission and control within industrial motion control environments.Features
Designed for integration with ABB drive and servo system architectures.
Supports multi-conductor shielded cable configurations to minimize electromagnetic interference.
Robust construction suitable for demanding industrial operating environments.
Designed for consistent performance in high-precision motion control applications.
Technical Specifications
Product Model
GHV0360875R0035 / 810-281670-004
Manufacturer
ABB
Voltage Rating
300 V AC
Current Rating
1-2 A per conductor
Conductor Count
6-15 conductors
Capacitance
< 100 pF/m (typical)
Operating Temperature
-20 degC to +80 degC (flexing); -30 degC to +80 degC (static)
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% RH (non-condensing)
Installation Guidelines
Ensure the drive system is fully powered down and locked out before attempting to install or remove the drive board card.
Handle the module using proper ESD (Electrostatic Discharge) protection practices to prevent damage to sensitive electronic components.
Verify that all multi-conductor shielded cables are properly seated and secured to ensure signal integrity.
Ensure the environment meets the specified temperature and humidity requirements to prevent premature component failure.
Check that the board is correctly aligned with the slot or mounting interface before applying pressure to seat the connector.
FAQWhat is the primary function of the GHV0360875R0035 drive board?This board serves as a critical interface component within ABB drive and servo systems, managing signal routing and control logic for motor operation.What type of cabling is recommended for this board?The unit is designed to interface with multi-conductor shielded cables to ensure reliable operation and protection against electrical noise in industrial settings.Are there specific environmental requirements for storage?Yes, the module should be stored in a controlled environment within the range of -40 degC to +85 degC, kept dry, and protected from direct environmental contaminants.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB ICSI08E1-230 is a binary input unit designed for the Procontic CS31 automation system. This module facilitates the reliable acquisition of digital signals within industrial control environments, ensuring seamless integration with the CS31 fieldbus architecture. It is engineered for high-performance signal processing in distributed I/O applications.Features
Designed for integration with the ABB Procontic CS31 system.
Provides robust binary signal input processing.
Compact hardware design for efficient panel space utilization.
Compatible with standard CS31 fieldbus communication protocols.
ApplicationsThis binary input unit is primarily utilized in industrial automation systems where distributed I/O is required. It is commonly deployed in manufacturing lines, process control systems, and machine automation setups that rely on the CS31 communication standard for signal monitoring and data acquisition.Technical Specifications
Product Model
ICSI08E1-230
Spare Model / Order Code
FPR3316101R0016
Manufacturer
ABB
System Series
Procontic CS31
Weight
0.44 kg
Installation Guidelines
Ensure the power supply is disconnected before installing or removing the module from the rack or DIN rail.
Verify that the module is securely seated in the designated slot to ensure proper backplane communication.
Maintain proper grounding practices to protect against electromagnetic interference (EMI) and electrostatic discharge (ESD).
Ensure adequate ventilation around the module to prevent overheating during continuous operation.
Route signal cables separately from high-voltage power lines to minimize signal noise and crosstalk.
FAQWhat is the primary function of the ICSI08E1-230?The ICSI08E1-230 is a binary input unit used to interface digital signals with the ABB Procontic CS31 automation system.Is this module compatible with other CS31 series components?Yes, this unit is designed specifically for the Procontic CS31 architecture and is intended to function within that ecosystem.What should I do if the module fails to communicate?Check the physical connection to the CS31 bus, verify that the module is properly seated, and ensure that the input voltage levels are within the specified operating range for the unit.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB TC516 is an RS485 twisted pair modem designed for industrial communication applications within the Advant Master system environment. This module facilitates reliable data transmission over RS485 serial interfaces, ensuring robust connectivity in demanding automation environments. It is identified by the order code 3BSE012632R1.Features
Designed for RS485 twisted pair communication protocols.
Compatible with ABB Advant Master control systems.
Engineered for industrial reliability and signal integrity.
Compact form factor for efficient cabinet space utilization.
Technical Specifications
Product Model
TC516
Order Code
3BSE012632R1
Communication Type
RS485 Twisted Pair
Manufacturer
ABB
Weight
0.72 kg
Tariff Code
8517620050
Installation Guidelines
Ensure the system power is completely disconnected before installing or removing the module to prevent electrical damage.
Mount the unit in a clean, dry, and vibration-free environment, typically within an industrial control cabinet.
Use shielded twisted pair cabling for RS485 connections to minimize electromagnetic interference (EMI).
Ensure proper grounding of the cable shields at one end to avoid ground loops.
Maintain adequate spacing from high-voltage power lines and frequency converters to prevent signal degradation.
Verify all terminal connections are secure and properly seated before restoring power.
FAQWhat is the primary function of the ABB TC516?The TC516 serves as a modem for RS485 twisted pair communication, allowing for serial data exchange between devices in an ABB Advant Master automation system.Is the TC516 compatible with other systems?The TC516 is specifically engineered for integration with the ABB Advant Master series. Please consult your system documentation to ensure compatibility with your specific controller configuration.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB NIOC-01 is an I/O base board designed for use within the ACS 600 series drive systems. This component serves as a standard I/O interface, facilitating communication and signal processing between the drive control unit and external field devices. As a critical spare part for legacy ACS 600 installations, the NIOC-01 ensures reliable signal distribution for monitoring and control applications.Features
Standard I/O kit configuration for seamless integration with compatible ACS 600 drives.
Robust PCB construction designed for industrial control environments.
Direct interface support for essential drive I/O functions.
Genuine ABB spare component, identified by part number 3BSE005735R1.
ApplicationsThis I/O base board is specifically engineered for the ABB ACS 600 drive family. It is typically utilized in industrial automation, motor control centers, and process manufacturing environments where precise control of drive parameters and external I/O signal management is required.Technical Specifications
Product Model
NIOC-01
Spare Part Number
3BSE005735R1
Alternative Part ID
58906816
Component Type
I/O Base Board
Manufacturer
ABB
Weight
0.18 kg
Installation Guidelines
Ensure all power is disconnected from the drive system before attempting to remove or install the NIOC-01 board.
Handle the PCB by the edges to avoid electrostatic discharge (ESD) damage to sensitive components.
Verify that the board is correctly seated in the designated slot and that all connectors are fully engaged.
Ensure the environment is free from excessive dust, moisture, and vibration to maintain long-term reliability.
Consult the original ACS 600 hardware manual for specific wiring diagrams and configuration settings required for your drive setup.
FAQIs the NIOC-01 still in production?No, the NIOC-01 has been discontinued by the manufacturer. It is now primarily available as a spare part for maintenance and repair of existing legacy systems.What is the primary function of the NIOC-01?The NIOC-01 acts as the base board for I/O signals in the ACS 600 drive, providing the necessary hardware interface for connecting external control signals to the drive's control unit.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB CI610 is an I/O Bus Extender module designed for use within the Advant OCS and Advant 800xA control system environments. This module facilitates the extension of the I/O bus, allowing for flexible configuration and expanded connectivity in distributed control architectures.Features
Designed for Advant OCS and Advant 800xA system integration.
Provides reliable I/O bus extension capabilities.
Robust industrial construction for demanding control room environments.
Original ABB spare part, identified by order code 3BHT300003R1.
ApplicationsThe CI610 is primarily utilized in industrial automation systems where physical distance between the controller and I/O racks requires bus extension. It is commonly found in power generation, chemical processing, and large-scale manufacturing control systems utilizing the Advant platform.Technical Specifications
Manufacturer
ABB
Model
CI610
Part Number
3BHT300003R1
Product Type
I/O Bus Extender
Weight
1.16 kg
Tariff Code
8517620050
Installation Guidelines
Ensure the control system is powered down before installing or removing the CI610 module to prevent electrical damage.
Verify that the module is properly seated in the designated rack slot to ensure reliable backplane communication.
Maintain proper grounding practices for the rack and cabinet to minimize electromagnetic interference (EMI).
Ensure adequate ventilation around the module to prevent overheating during continuous operation.
Handle with care to avoid electrostatic discharge (ESD) damage to the internal circuitry.
FAQIs the ABB CI610 still in production?No, the CI610 has been discontinued by the manufacturer. We provide this unit as a spare part for legacy system maintenance and support.What systems is the CI610 compatible with?The CI610 is specifically designed for integration with ABB Advant OCS and Advant 800xA control systems.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB UDD406A (3BHE041464R0101) is a high-performance control board designed for use within ABB’s heavy-duty power electronics and control portfolios, including the UNITROL 6000 excitation system. This module functions as a critical logic controller, executing complex mathematical models required for managing the magnetic fields of large synchronous generators to ensure grid stability and reactive power compensation. Beyond its primary control functions, it serves as a diagnostic hub, monitoring the health of connected power semiconductor modules and tracking historical fault data.Features
Central processing unit for power electronics and excitation systems.
Supports fiber optic communication for high-speed data exchange.
Integrated diagnostic capabilities for power semiconductor health monitoring.
Designed for standard sub-rack mounting with robust front-plane connectors.
Compatible with modular industrial control architectures.
Applications
Power Generation: Excitation systems for grid-compliant generator stabilization.
Oil & Gas: Efficient control for pumping and compression systems.
Metals & Mining: Energy management and motor control for heavy industrial mills.
Chemical Processing: Continuous process control for emissions and reaction management.
Manufacturing: Energy-efficient control for industrial drives and injection molding machinery.
Technical Specifications
Model
UDD406A
Order Code
3BHE041464R0101
Digital Inputs
24V DC
Analog Inputs
0/4-20mA
Operating Temperature
0 degC to +55 degC
Storage Temperature
-25 degC to +70 degC
Humidity
5-95% RH non-condensing
Installation Guidelines
Ensure the system is powered down before inserting or removing the module from the rack.
Mark all existing wires with their connector IDs before detaching the old unit to ensure correct reconnection.
Maintain physical separation between control/communication wiring and high-power input/motor cables to prevent electromagnetic interference (EMI).
Route cables through designated cabinet grommets and ensure cable clamps are tightened on the stripped sections to maintain a secure, low-impedance ground.
Handle the module using standard ESD (Electrostatic Discharge) precautions to prevent damage to sensitive internal circuitry.
FAQWhat is the primary function of the ABB UDD406A?The UDD406A acts as a central control board and logic controller, primarily used in excitation systems to manage generator magnetic fields and perform real-time diagnostics on power electronics.Is this module compatible with existing ABB control systems?Yes, it is designed for integration into ABB Advant OCS and 800xA environments, as well as specific power electronics platforms like the UNITROL 6000.What are the environmental requirements for this board?The module is designed for industrial environments with an operating temperature range of 0 degC to +55 degC and requires a non-condensing humidity environment of 5-95% RH.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB SDCS-PIN-41A (Order Code: 3BSE004939R1) is a pulse transformer module designed for use within ABB industrial drive systems. This component serves as a critical interface for signal isolation and pulse transmission, ensuring reliable control signal delivery within the drive's power electronics architecture. As a discontinued component, it is primarily utilized for the maintenance and repair of legacy ABB drive installations.Features
Original ABB spare part for drive control systems.
Designed for high-reliability pulse signal isolation.
Compact PCB-based assembly for integration into drive control racks.
Engineered for compatibility with specific ABB drive series.
Technical Specifications
Manufacturer
ABB
Model
SDCS-PIN-41A
Order Code
3BSE004939R1
Component Type
Pulse Transformer Module
Tariff Code
8537101190
Installation Guidelines
Ensure the drive system is fully de-energized and locked out before attempting to remove or install the module.
Handle the PCB using standard ESD (Electrostatic Discharge) protection practices to prevent damage to sensitive components.
Verify that the module is correctly seated in the designated slot and that all terminal connections are secure before restoring power.
Inspect surrounding components for signs of heat stress or dust accumulation during the replacement process.
Ensure that the replacement module matches the exact order code (3BSE004939R1) to maintain system integrity.
FAQIs this module compatible with all ABB drives?No, the SDCS-PIN-41A is designed for specific ABB drive models. Please verify the part number on your existing module against the 3BSE004939R1 order code before installation.Is this part still in production?No, this module has been discontinued by the manufacturer. We provide these units as spare parts for the maintenance of existing legacy systems.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB CI853A Communication Interface Module
The ABB CI853A, also cataloged as the CI853A Communication Interface Module, operates as a dedicated hardware component for industrial network data exchange within ABB AC 800M and automation system platforms. The module manages communication links between controllers and connected field-level devices through configured industrial protocols.
Hardware Specifications
Parameter
Specification
Model
CI853A
Brand
ABB
Product Type
Communication Interface Module
System Compatibility
ABB AC 800M, Freelance, and 800xA control system environments
Communication Function
Controller-to-field device and subsystem communication interface
Supported Protocols
Protocol support depends on firmware and system configuration, including ABB supported field communication networks
Transmission Speed
Up to 12 Mbps for supported Profibus-based configurations
Power Supply
ModuleBus / backplane powered, typically 24 VDC system supply
Mounting Type
DIN-rail mounting in ABB control cabinets
Indicators
Front LED indicators for power, module status, diagnostics, and communication activity
Protection Class
IP20 cabinet installation requirement
Operating Temp
0 deg C to +55 deg C
Dimensions
Not specified in available technical data
Weight
Not specified in available technical data
Power Consumption
Backplane power consumption depends on system configuration and load conditions
Origin
Sweden
Backplane Bus Communication and Industrial Network Integration
The ABB CI853A uses ABB controller backplane communication mechanisms to exchange configuration data and process information with connected automation components. The module supports deterministic industrial communication behavior through configured firmware functions and network parameters.
Furthermore, ABB automation platforms use firmware-managed communication interfaces to maintain compatibility between controller hardware, I/O subsystems, and engineering tools. The CI853A configuration depends on the installed control system revision, communication protocol selection, and application requirements.
The module supports industrial control architectures where communication interface density and network expansion require coordinated hardware addressing. Therefore, correct firmware compatibility and Control Builder configuration are required before commissioning.
Frequently Asked Questions
Q: Does the CI853A support hot-swap replacement during controller operation?A: Hot-swap capability depends on the ABB control system architecture, controller configuration, and approved module replacement procedures. The installation manual for the specific system revision defines replacement limitations.
Q: How does the CI853A connect to the ABB control system backplane?A: The module connects through the ABB system ModuleBus or controller backplane interface. The backplane provides power distribution and internal communication between installed modules.
Q: What factors affect CI853A communication performance?A: Communication performance depends on protocol selection, network configuration, firmware compatibility, cable installation quality, and connected device loading.
Field Installation Guidelines
Install the CI853A inside an approved ABB control cabinet with IP20 protection requirements.
Mount the module on a compatible DIN rail and verify mechanical locking before wiring.
Confirm module addressing, firmware compatibility, and Control Builder configuration before startup.
Route communication cables separately from high-voltage power cables to reduce electrical interference.
Use proper cable shielding and connect shield layers according to ABB grounding recommendations.
Verify backplane connections and power distribution before applying system voltage.
Check front-panel LED indicators after installation to confirm module status and communication activity.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB AI830A 3BSE040662R1 Analog Input Module - RTD
The ABB AI830A 3BSE040662R1, also cataloged as the AI830A Analog Input Module, provides direct temperature and resistance signal acquisition for ABB S800 I/O systems through RTD and resistive sensor interfaces.
Hardware Specifications
Parameter
Specification
Model
AI830A 3BSE040662R1
Brand
ABB
Product Type
Analog Input Module - RTD
System Platform
ABB S800 I/O
Origin
Sweden
Weight
0.24 kg
Dimensions
4.5 x 10.6 x 11.8 cm
Operating Temp
Not specified
Power Consumption
1.6 W
Signal Specification
3-wire RTD: Pt100, Cu10, Ni100, Ni120 and resistive potentiometer
Number of Channels
8
Resolution
14 Bit
Rated Insulation Voltage
50 V
Dielectric Test Voltage
500 V AC
CMRR at 50 Hz / 60 Hz
>120 dB at 10 ohm load
NMRR at 50 Hz / 60 Hz
>60 dB
Current Consumption +5 V Modulebus
70 mA
Current Consumption +24 V Modulebus
50 mA
Tariff Code
8537101190
Shipment Location
Xiamen, China
ABB S800 I/O Backplane and RTD Signal Processing
The AI830A module connects to the ABB S800 I/O architecture through ModuleBus communication and processes resistance-based sensor signals from field devices. The module supports 8 RTD input channels with 3-wire connection methods for temperature measurement applications.
Furthermore, the input circuits monitor sensor conditions including open circuit, short circuit, and grounded sensor states. The 14 Bit conversion resolution allows the module to provide detailed analog measurement data for controller processing.
The ABB S800 I/O platform uses modular I/O density scaling, allowing AI830A modules to integrate with distributed control configurations through standardized backplane communication. The module operates with defined ModuleBus power consumption values for system load calculation.
Frequently Asked Questions
Q: What type of sensors can the AI830A 3BSE040662R1 process?A: The AI830A processes 3-wire RTD sensors including Pt100, Cu10, Ni100, Ni120, and resistive potentiometer inputs.
Q: How does the AI830A detect field sensor faults?A: The module monitors input conditions and provides detection functions for open circuits, short circuits, and grounded sensor states.
Q: What is the power consumption requirement of the AI830A module?A: The module consumes 70 mA from the +5 V ModuleBus supply and 50 mA from the +24 V ModuleBus supply, with 1.6 W power dissipation.
Field Installation Guidelines
Install the AI830A module within the specified ABB S800 I/O mounting arrangement and verify ModuleBus connection alignment before power application.
Connect RTD sensors using the recommended 3-wire wiring method to reduce lead resistance influence on measurement accuracy.
Separate RTD signal cables from high-voltage power wiring and switching circuits to reduce electrical interference.
Connect cable shields according to the site grounding practice and control system installation standards.
Verify sensor polarity, channel assignment, and field wiring continuity before commissioning.
Confirm ModuleBus power loading remains within the supported system configuration limits.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
