Jelajahi rangkaian lengkap produk otomasi industri dari merek-merek ternama seperti ABB, Bently, Honeywell, GE, dan lainnya. IndustriaX Limited membantu produsen mendapatkan komponen langka dan sulit ditemukan di seluruh dunia dengan pengiriman cepat untuk meminimalkan waktu henti.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Bently Nevada 106M1079-01 is a Universal AC Power Supply Module engineered for the 3500 Series Machinery Protection System. This half-height module is designed to reside in the designated slots on the left side of the 3500 rack, providing essential power conversion for system modules. It accepts a wide range of AC input voltages and converts them into the stable DC voltages required for the operation of the 3500 rack components.Features
Universal AC input voltage range: 85 to 264 Vac rms.
Supports redundant power configurations when two modules are installed.
Hot-swappable design allows for insertion or removal without disrupting rack operation, provided a redundant supply is active.
Half-height form factor for efficient rack space utilization.
Dedicated architecture compatible with standard 3500/15 Universal AC Power Supply systems.
Applications
Oil & Gas: Monitoring of offshore platforms, refineries, and pipeline infrastructure.
Power Generation: Ensuring stability for grid-connected generators and turbines.
Petrochemicals: Protecting high-speed chemical processing equipment.
Mining: Monitoring large-scale crushers and industrial ventilation systems.
Technical Specifications
Model
3500/15 106M1079-01
Input Voltage (Non-hazardous)
85 to 264 Vac rms
Input Voltage (Hazardous)
85 to 250 Vac rms
Nominal Input Voltage
110 to 220 Vac
Input Frequency
47 to 63 Hz
Form Factor
Half-height module
Weight
1.2 kg
Installation Guidelines
Slot Assignment: Install in the two half-height slots on the far left of the 3500 rack. The lower slot is designated for the primary supply, and the upper slot is for the backup/redundant supply.
Rear PIM Installation: Ensure the Power Input Module (PIM) is installed in the rear of the rack in the slot corresponding to the front power supply position.
Module Insertion: Align the module with the guide rails and slide it firmly into the slot until the connectors seat securely. Tighten the captive thumb screws to ensure proper grounding and mechanical retention.
Handling: Always power down the rack before installing or removing modules to prevent electrical faults or system instability.
FAQWhat is the 3500/15 106M1079-01?The Bently Nevada 3500/15 106M1079-01 is a Universal AC Power Supply Module designed for the 3500 Mechanical Protection System, offering 85 to 264 Vac rms input.What is the function of the 106M1079-01?It is a half-height Universal AC Power Supply module that converts input voltage to the internal voltages required by the 3500 machinery protection rack.Does it support redundancy?Yes. When two modules are installed, the one in the lower slot acts as the primary supply, and the upper slot acts as the backup. This ensures the rack remains operational even if one supply fails or is removed.Do you provide a warranty?Yes, we provide a 12-month warranty for this module. Please contact our support team for assistance with any issues encountered within this period.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Bently Nevada 330380-90-00 is a 3300 XL 16mm High Temperature Proximitor Sensor designed for non-contacting proximity measurements in extreme environments. As part of the 3300 XL High Temperature Proximity System (HTPS), this sensor is engineered to convert the physical distance (gap) between a probe and a target into a proportional 3.94 V/mm (100 mV/mil) voltage signal, facilitating critical machine protection and diagnostic monitoring.Features
Designed for continuous operation in extreme environments with probe tip ratings up to +350 degC (+662 degF).
4 mm (160 mils) linear measurement range suitable for hot-section machine monitoring.
Hermetically-sealed ceramic probe tip provides robust protection against moisture and contaminants.
Compatible with standard Bently Nevada monitoring and diagnostic equipment.
Integrated hardline cable assembly for reliable signal transmission through high-temperature zones.
Applications
Steam turbines and large-scale power generation equipment.
Large centrifugal compressors and gas turbine drive pump sets.
Heavy-duty rotor equipment in steel and paper mills.
Hydroelectric generating units for axial trajectory and deflection monitoring.
Mode shape analysis for turbine R&D and troubleshooting.
Technical Specifications
Model
330380-90-00
System Length
9 meters
Probe Tip Material
Ceramic
Signal Output
3.94 V/mm (100 mV/mil)
Linear Range
4 mm (160 mils)
Output Resistance
50 Ohm
Probe Case Torque
81 N.m (720 in.lb)
Operating Temp (Proximitor)
-51 degC to +100 degC
Installation Guidelines
Ensure the probe is mounted securely using the specified torque to prevent vibration-induced measurement errors.
Route hardline cables carefully to avoid exceeding minimum bend radii, especially near high-temperature zones.
Maintain proper grounding practices for the Proximitor sensor housing to minimize EMI/RFI interference.
Verify that the total system length (probe + extension cable) matches the calibration requirements of the monitoring system.
Always power down the monitoring system before connecting or disconnecting the sensor to prevent electrical damage.
FAQWhat is the primary function of the 330380-90-00?It is a proximity sensor used to measure vibration, thrust position, and differential expansion in hot areas of rotating machinery, converting gap distance into a proportional voltage signal.What is the total system length for this model?The 330380-90-00 is configured for a total system length of 9 meters.Does this sensor require armor?This specific model is provided without armor; armored versions are typically handled as custom configurations.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1734-IE2V is a POINT I/O analog input module designed for high-density, space-saving applications in industrial automation systems. This module provides two single-ended, non-isolated voltage inputs, utilizing Delta Sigma conversion technology to ensure accurate data acquisition for process control and monitoring tasks.Features
Two single-ended, non-isolated voltage input channels.
Delta Sigma conversion type for reliable signal processing.
Signed Integer data format for seamless integration with ControlLogix or CompactLogix controllers.
Compact POINT I/O form factor for flexible, modular mounting on DIN rails.
Key switch position 3 for mechanical module identification and protection.
Open-type enclosure rating suitable for controlled industrial environments.
Technical Specifications
Module Type
Analog Input Module
Inputs
2 Single-ended, non-isolated
Signal Type
Voltage
Conversion Type
Delta Sigma
Absolute Accuracy
0.1% Full Scale at 25 degC (77 degF)
Data Format
Signed Integer
Key Switch Position
3
Enclosure Type
Open
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the POINT I/O base.
Mount the module onto a standard DIN rail, ensuring the locking mechanism is fully engaged.
Verify that the key switch is set to position 3 to match the module type and prevent incorrect module insertion.
Use shielded twisted-pair cabling for analog signals to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the I/O base to ensure signal integrity and safety.
Operate within the specified environmental conditions to avoid thermal degradation or measurement inaccuracies.
FAQWhat is the primary function of the 1734-IE2V?The 1734-IE2V is an analog input module used within the POINT I/O system to convert field voltage signals into digital data for processing by the PLC.Is this module isolated?No, the 1734-IE2V features non-isolated, single-ended inputs.What is the key switch position for this module?The key switch position for the 1734-IE2V is set to 3.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB ECZ is a bus module designed for the Procontic CS31 series. This module serves as a critical interface component within the CS31 automation architecture, facilitating communication and signal distribution. It is engineered to support versatile power input requirements, accommodating both 24VDC and 110/220VAC supply voltages, making it adaptable to various industrial power environments.Features
Compatible with ABB Procontic CS31 control systems.
Supports dual power input ranges: 24VDC and 110/220VAC.
Compact form factor for efficient rack or panel space utilization.
Robust industrial construction for reliable operation in control cabinets.
Technical Specifications
Product Model
ECZ
Order Code / Spare Model
FPR3700001R0001
Manufacturer
ABB
Product Type
Bus Module
Input Voltage
24VDC / 110/220VAC
Weight
0.18 kg
Installation Guidelines
Ensure the control system power is fully disconnected before installing or removing the module to prevent electrical damage.
Mount the module in a clean, dry environment within an industrial enclosure to protect against dust, moisture, and extreme temperatures.
Verify that the supply voltage matches the module specifications (24VDC or 110/220VAC) before applying power.
Ensure proper grounding of the cabinet backplane to minimize electromagnetic interference (EMI) and ensure signal integrity.
Maintain adequate clearance around the module to allow for proper heat dissipation and airflow.
FAQWhat is the primary function of the ABB ECZ module?The ECZ module is a bus module used within the ABB Procontic CS31 system to manage bus communication and power distribution.Can this module operate on different voltages?Yes, the ECZ is designed to be compatible with 24VDC or 110/220VAC power inputs, providing flexibility for different site power configurations.Is this module compatible with other Procontic series?The ECZ is specifically designed for the Procontic CS31 series. Please verify your system documentation to ensure compatibility with your specific controller configuration.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe F31X134EPRBEG1 is an Encoder Process Board and Processor Interface Card engineered by General Electric for use within general-purpose drive systems, specifically compatible with the DC-300 drive series. This board is designed to manage high-speed feedback and tachometer scaling, providing the precise motor speed telemetry required for accurate velocity loop control in industrial automation environments, such as metal processing and assembly lines.Features
Facilitates real-time motor speed tracking and signal conditioning.
Integrated diagnostic interface via a 3-screw terminal strip for live voltage measurement.
Supports PI-tach scale calibration, allowing for precise scaling adjustments at 50 percent of total motor speed capacity.
Designed for seamless integration within the 531X series drive architecture.
ApplicationsThis board is utilized in industrial drive control systems, particularly within manufacturing plants and metal processing facilities where precise speed regulation and feedback monitoring are critical to maintaining machine stability and reducing operational downtime.Technical Specifications
Model
F31X134EPRBEG1
Brand
General Electric (GE)
Product Line
531X Boards Series
Secondary Board Number
531X134EPRBEG1
Factory Edge Code
FR00/0
Compatibility
GE DC-300 Drive Series
Operating Temperature
0 to 55 deg C
Installation Guidelines
Ensure the drive system is fully powered down and locked out before attempting to install or remove the board.
Handle the PCB by its edges; avoid touching components or solder joints to prevent electrostatic discharge (ESD) damage.
Verify that the board is correctly seated in the designated 531X series drive slot.
Use a standard voltmeter to monitor voltage across terminals 1 TB-1 and 1 TB-3 for diagnostic evaluation.
Ensure all connections to the 3-screw terminal strip are secure and properly torqued to prevent signal noise or intermittent feedback.
FAQWhat is the primary function of the F31X134EPRBEG1 board?This board acts as an encoder process and interface card that handles high-speed feedback and tachometer scaling for GE DC-300 drives, ensuring accurate velocity loop performance.How do I calibrate the tachometer scaling?Calibration is performed using the 3-screw terminal strip located on the card. By measuring voltage between terminals 1 TB-1 and 1 TB-3, technicians can scale the PI-tach parameters to 50 percent of the motor's total speed capacity.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Schneider TSXAMZ600 is a high-performance analogue I/O module designed for integration within industrial automation systems. This module provides precise signal acquisition and control capabilities, featuring four analogue inputs and two analogue outputs. It is specifically engineered for compatibility with the RMS-TSG-TZ-C series PLC architecture, offering a reliable solution for modular process control and monitoring applications.Features
Four configurable analogue input channels supporting voltage (0-10 V) or current (0-20 mA) signals.
Two analogue output channels for precise control of actuators and process instrumentation.
High-resolution 12-bit conversion for accurate data processing.
Compact, space-saving design suitable for standard PLC rack mounting.
Robust construction designed for industrial environments with an operating temperature range of 0 degC to 60 degC.
ApplicationsThis module is suitable for various industrial automation tasks, including process variable monitoring, actuator control, and integration into complex PLC-based control loops within manufacturing and process industries.Technical Specifications
Manufacturer
Schneider Electric
Model
TSXAMZ600
Series
RMS-TSG-TZ-C
Analogue Inputs
4 channels (0-10 V / 0-20 mA)
Analogue Outputs
2 channels (0-10 V / 0-20 mA)
Input Impedance
10 kOhm (voltage), 250 Ohm (current)
Output Load Capacity
500 Ohm maximum
Resolution
12-bit
Accuracy
+/- 0.5%
Response Time
10 ms typical
Power Supply
24 VDC
Operating Temperature
0 degC to 60 degC
Installation Guidelines
Ensure the PLC rack power is disconnected before installing or removing the module to prevent electrical damage.
Mount the module securely in the designated rack slot, ensuring proper alignment with the backplane connector.
Use shielded twisted-pair cabling for all analogue signal connections to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the PLC system to ensure signal integrity and safety.
Keep the module away from high-voltage power lines and high-EMI equipment to prevent signal noise.
Ensure adequate ventilation within the control cabinet to maintain operating temperatures within the specified 0-60 degC range.
FAQWhat is the resolution of the TSXAMZ600 module?The module features 12-bit resolution for both input and output channels.Can this module handle both voltage and current signals?Yes, the module is designed to support both 0-10 V voltage and 0-20 mA current signals for its input and output channels.What is the required power supply for this module?The TSXAMZ600 operates on a 24 VDC power supply.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Honeywell RM7897C1000 is a relay-based combustion safety controller from the 7800 Series, engineered for precise burner management in industrial applications. This module provides reliable ignition sequencing, flame supervision, and interlock monitoring, ensuring safe operation for boiler systems, process furnaces, and power generation units.Features
Integrated burner purge and ignition sequencing control.
Configurable pilot flame establishment timing (selectable 4-second or 10-second windows).
Delayed main fuel valve actuation for enhanced safety.
Robust relay-based architecture designed for stability in high-EMI industrial environments.
Support for configurable interlock input mapping to interface with external safety devices.
Preignition control logic to validate safety conditions before fuel introduction.
ApplicationsThis module is widely utilized in industrial combustion management, including:
Commercial and industrial boiler systems.
Refinery and petrochemical process heaters.
Power generation burner management units.
Industrial furnace ignition and flame monitoring systems.
Technical Specifications
Model
RM7897C1000
Series
7800 Series
Supply Voltage
120 VAC
Frequency
50/60 Hz
Power Consumption
Approx 6 W
Pilot Establishing Time
4 s or 10 s (selectable)
Operating Temperature
0 to 60 deg C
Mounting
Plug-in module for 7800 Series chassis
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the chassis.
The module must be installed in a 7800 Series compatible burner control chassis.
Verify that all external interlocks and flame detectors are correctly wired to the system backplane according to the specific burner application diagram.
Maintain proper grounding of the chassis to prevent electrical noise interference.
Ensure the operating environment remains within the specified 0 to 60 deg C temperature range to prevent relay degradation.
Follow all local and national safety codes regarding burner management and combustion safety.
FAQIs the RM7897C1000 programmable?No, the RM7897C1000 is a factory-configured relay module. It does not support field-programmable software logic; however, it offers selectable hardware timing and interlock configurations as defined by the model specifications.What is the primary function of the pilot establishing time?The pilot establishing time defines the duration the controller allows for the pilot flame to be proven before the main fuel valve is energized. This model allows for a 4-second or 10-second window to accommodate different burner ignition characteristics.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe General Electric IC660EBS103 is a Genius I/O block designed for integration within the Genius I/O distributed control architecture. This module facilitates reliable communication and data exchange between field devices and the host controller, supporting both AC and DC power configurations to suit diverse industrial environments.Features
Supports versatile AC and DC power inputs.
Provides 1500 V block-to-block isolation for enhanced signal integrity and protection.
Selectable input filter times ranging from 10 to 100 mS in 10 mS increments.
Engineered for robust performance in industrial temperature ranges from 0 to 60 degC.
Compatible with the Genius I/O communication protocol.
Technical Specifications
Product Model
IC660EBS103
Product Line
Genius I/O
Isolation
1500 V
Operating Temperature
0 to 60 degC
Storage Temperature
-40 to 100 degC
Frequency
47 to 63 Hz
Humidity
5 to 95 percent (non-condensing)
Input Filter Time
10 to 100 mS (10 mS steps)
Installation Guidelines
Ensure the system power is disconnected before installing or removing the I/O block to prevent electrical damage.
Mount the unit in a clean, dry environment with adequate ventilation to maintain operating temperatures within the specified 0 to 60 degC range.
Verify that all wiring connections are secure and follow local electrical codes for industrial control equipment.
Use shielded cabling for communication lines to minimize electromagnetic interference (EMI).
Handle the module using standard ESD (Electrostatic Discharge) precautions to protect internal circuitry.
FAQWhat is the primary function of the IC660EBS103?The IC660EBS103 serves as a Genius I/O block, acting as a field-side interface for the Genius I/O network, allowing for the distributed monitoring and control of industrial processes.Can this block be used in high-humidity environments?The module is rated for operation in 5 to 95 percent non-condensing humidity. Ensure the enclosure is properly sealed if the environment exceeds these parameters.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Siemens Simatic S5 6ES5252-4BA11 (IP252B) is an intelligent processor module designed for high-performance closed-loop control and positioning tasks within the Simatic S5 controller platform. By offloading time-critical mathematical processing and regulation algorithms from the main CPU, this module ensures deterministic execution and rapid response times. It is widely utilized in demanding industrial applications, including thermal power plants, oil refining, and automated mining operations, where localized control loop stability is essential for minimizing downtime.Features
Autonomous Logic Execution: Features dedicated on-board processing and memory to compute PID loops, velocity profiles, and positioning matrices independently of the main PLC scan cycle.
High-Speed Bus Interface: Facilitates high-speed parallel data mapping over the standard S5 backplane for efficient transfer of processed values to the host controller.
Robust Industrial Design: Engineered to withstand thermal drift and electromagnetic interference, ensuring reliable operation in harsh environments.
System Optimization: Reduces CPU load by handling complex calculations locally, preventing bus congestion and maintaining tight process synchronization.
ApplicationsThis module is designed for precision industrial control environments, specifically for:
Closed-loop regulation and process control.
High-speed positioning and motion control tasks.
Time-critical mathematical modeling and algorithm execution.
Complex automation in power generation and heavy industrial manufacturing.
Technical Specifications
Model
6ES5252-4BA11
Alternate Designation
IP252B, G26004-A3118-P110
Brand
Siemens Simatic S5
Product Family
Simatic S5 Intelligent Processors
Operating Temperature
0 to 55 deg C
Storage Temperature
-40 to 70 deg C
Power Consumption
4.5 W (typical)
Installation Guidelines
Ensure the PLC rack power is disconnected before inserting or removing the module to prevent electrical damage.
Verify the module is correctly seated in the designated S5 backplane slot and secured with the integrated locking mechanism.
Maintain adequate ventilation around the rack to ensure the module operates within its specified temperature range (0-55 deg C).
Follow standard ESD (Electrostatic Discharge) handling procedures when touching the module circuitry.
Ensure all signal cables are properly shielded and routed away from high-voltage or high-EMI sources to maintain signal integrity.
FAQWhat is the primary function of the 6ES5252-4BA11?The 6ES5252-4BA11 (IP252B) acts as an intelligent co-processor that executes complex control algorithms and PID loops independently, reducing the processing burden on the main Siemens S5 CPU.Is this module compatible with all S5 racks?This module is designed for the standard Simatic S5 backplane architecture. Please verify your specific rack configuration and power supply capacity before installation.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe 2840A20G01 is a high-performance control card designed for the Emerson Ovation distributed control system (DCS) platform. Engineered for mission-critical industrial applications, this module serves as a computational engine for real-time logic execution, data acquisition, and signal processing. It is widely utilized in power generation and heavy industrial facilities to ensure precise management of control loops and overall system stability.Features
High-speed processing architecture for real-time logic execution and low-latency I/O handling.
Supports advanced redundancy configurations to maintain control functions during primary processor degradation.
Integrated diagnostic monitoring for internal circuitry and backplane communication health.
Robust electrical isolation and electromagnetic interference (EMI) shielding for signal integrity in high-voltage environments.
Deterministic firmware performance optimized for strict industrial timing requirements.
ApplicationsThis control card is primarily used within the Emerson Ovation DCS environment for:
Power plant process control and monitoring.
Complex loop control in heavy industrial manufacturing.
High-density data acquisition systems requiring high reliability.
Mission-critical automation tasks where system uptime is paramount.
Technical Specifications
Model
2840A20G01
Brand
Emerson
Series
Ovation
Operating Temperature
0 to 60 degC
Installation Guidelines
Ensure the Ovation rack is powered down before inserting or removing the control card to prevent electrical damage.
Handle the module using proper ESD (electrostatic discharge) precautions to protect sensitive internal components.
Verify that the backplane connector is clean and free of debris before seating the card.
Ensure the card is fully seated and secured within the rack slot to maintain reliable communication with the backplane.
Route signal cables away from high-voltage power lines to minimize EMI, utilizing shielded cabling where required by site standards.
FAQIs this module compatible with all Ovation system generations?The 2840A20G01 is designed for specific Ovation hardware architectures. Please verify your existing controller firmware and backplane revision to ensure full compatibility with your specific system configuration.Does this card support hot-swapping?While the Ovation system is designed for high availability, it is standard engineering practice to follow the specific maintenance procedures outlined in your plant's Ovation technical manual regarding module replacement and system-wide power-down requirements.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1756-CPR2 is a specialized redundant power supply cable designed for use within the ControlLogix platform. This cable facilitates the connection of redundant power supplies to the 1756 chassis, ensuring continuous power availability for critical control applications. It is engineered to maintain system integrity by providing a reliable interface for power distribution in high-availability configurations.Features
Designed specifically for ControlLogix redundant power supply configurations.
Provides secure, reliable power distribution between power supplies and the chassis.
Robust construction suitable for industrial control cabinet environments.
Standardized length for ease of installation in standard rack setups.
Technical Specifications
Product Model
1756-CPR2
Series
ControlLogix
Cable Length
3 feet (0.91 meters)
Input Current
970 mA at 5.1V DC; 1.7 mA at 24V DC
Thermal Dissipation
17.4 BTU per hour
Weight
0.293 kg
Installation Guidelines
Ensure the power supply is disconnected from the main power source before attempting to connect or disconnect the 1756-CPR2 cable.
Route the cable away from high-voltage lines and sources of electromagnetic interference (EMI) to prevent signal noise or potential power instability.
Verify that the connectors are fully seated and locked into the corresponding power supply and chassis ports to ensure a stable electrical connection.
Avoid excessive bending or tension on the cable during installation to prevent internal conductor fatigue.
Follow standard industrial grounding practices to maintain system safety and compliance.
FAQWhat is the primary function of the 1756-CPR2 cable?The 1756-CPR2 is used to connect redundant power supplies to a ControlLogix chassis, allowing the system to switch to a backup power source if the primary supply fails, thereby preventing downtime.Is this cable compatible with all ControlLogix power supplies?This cable is specifically designed for use with ControlLogix redundant power supply systems. Always verify your specific power supply module compatibility in the product manual before installation.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Siemens 6ES5 464-8MF11 is an isolated 2-channel analog input module designed for the Simatic S5 architecture, including S5-90U, S5-95U, and S5-100U systems, as well as ET 100U and ET 200U distributed I/O stations. This module is engineered for high-precision conversion of low-voltage millivolt signals (+/-500 mV) and Pt100 resistance temperature detectors. By providing galvanic isolation between field signals and the internal system backplane, the module ensures signal integrity, suppresses common-mode noise, and prevents ground loop currents in demanding industrial environments such as petrochemical refining and thermal power facilities.Features
2-channel isolated analog input configuration.
Supports +/-500 mV and Pt100 RTD sensor inputs.
Galvanic isolation between channels and the backplane to protect against electrical interference.
Integrated signal conditioning and filtering for high noise rejection.
Compact design compatible with standard S5-100U bus units.
ApplicationsThis module is typically deployed in temperature-critical processing environments where precise analog-to-digital conversion is required for closed-loop control. Common applications include monitoring thermal processes in metal smelting, petrochemical plants, and power generation facilities.Technical Specifications
Model
6ES5 464-8MF11
Brand
Siemens
Input Channels
2 Isolated
Input Ranges
+/-500 mV, Pt100 RTD
Power Consumption
1.5 W at 24 VDC
Operating Temperature
0 to 60 deg C
Compatibility
Simatic S5-90U, S5-95U, S5-100U, ET 100U, ET 200U
Installation Guidelines
Ensure the controller power is switched off before inserting or removing the module from the rack or bus unit.
Mount the module securely into the designated S5-100U bus unit slot to ensure proper backplane connection.
Use shielded cabling for all analog inputs to minimize electromagnetic interference (EMI).
Maintain proper grounding practices to ensure the effectiveness of the galvanic isolation.
Ensure adequate ventilation in the control cabinet to maintain operating temperatures within the 0 to 60 deg C range.
FAQIs this module compatible with S5-115U systems?The 6ES5 464-8MF11 is specifically designed for the S5-90U, S5-95U, and S5-100U series. Please consult your specific system documentation before attempting installation in other S5 series hardware.Does this module require external power?The module draws its operational power directly from the backplane rail of the S5 system.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Schneider Electric VW3A3607 is a dedicated communication module designed for integration within the Altivar drive range. This module enables seamless connectivity and data exchange between Altivar variable speed drives and a Profibus DP V1 fieldbus network, facilitating advanced control and monitoring in industrial automation environments.Features
Designed specifically for the Altivar product range.
Supports Profibus DP V1 communication protocol for robust fieldbus integration.
Equipped with a standard 9-pin female SUB-D connector for reliable physical connection.
Supports a wide range of transmission rates from 9.6 kbps up to 12 Mbps.
Technical Specifications
Product Model
VW3A3607
Product Type
Communication Module
Communication Protocol
Profibus DP V1
Electrical Connection
1 x Female SUB-D 9 connector
Transmission Rate
9.6 kbps to 12 Mbps
Weight
0.28 kg
Installation Guidelines
Ensure the drive is completely powered down and the DC bus capacitors have discharged before installing or removing the communication module.
Handle the module with care, observing standard ESD (Electrostatic Discharge) precautions to prevent damage to internal circuitry.
Insert the module into the designated option slot on the Altivar drive, ensuring it is firmly seated and secured using the provided mounting hardware.
Use high-quality, shielded Profibus-compliant cabling to minimize electromagnetic interference (EMI) in industrial environments.
Ensure the cable shield is properly grounded at the cabinet entry point or as specified by the drive installation manual.
Verify that the Profibus address and termination settings are correctly configured via the drive's HMI or software parameters after installation.
FAQWhat is the primary function of the VW3A3607?The VW3A3607 acts as a gateway, allowing an Altivar drive to function as a slave device on a Profibus DP V1 network, enabling remote control, monitoring, and parameterization.Is this module compatible with all Altivar drives?This module is designed for the Altivar range. Please verify your specific drive model's compatibility documentation to ensure the VW3A3607 is supported for your hardware configuration.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe General Electric Multilin 750-P5-G5-HI-A1-R-E is a high-performance Feeder Management Relay from the SR750 series. Designed for the protection, control, and monitoring of electrical distribution feeders, this relay provides comprehensive protection features for industrial and utility power systems. It features advanced metering capabilities and flexible communication options to ensure reliable operation in demanding electrical environments.Features
Phase current input: 5 Amp
Ground current input: 5 Amp Zero Sequence
Sensitive current input: 5 Amp
Wide range power supply: 80-300 V DC or 70-265 V AC (48/62 Hz)
Analog output: Eight 4-20 mA channels
Visual indication: Red LED for breaker closed status
Fully isolated outputs for enhanced noise immunity
High-speed response: 100% indication in less than 3 power system cycles
Technical Specifications
Product Model
750-P5-G5-HI-A1-R-E
Manufacturer
General Electric
Power Consumption
25 VA nominal, 35 VA maximum
Make and Carry
15 A @ 250 VDC for 500 ms
Accuracy
+/- 1% of full scale
Voltage Loss Hold-up Time
30 ms
Operating Temperature
-40 degC to +60 degC
Storage Temperature
-40 degC to +85 degC
Humidity
Up to 95% (non-condensing) @ 55 degC
Installation Guidelines
Ensure the relay is installed in a clean, dry environment protected from excessive dust and moisture.
Verify that the control power supply matches the specified voltage range (80-300 V DC or 70-265 V AC) before applying power.
Use shielded cables for analog inputs and outputs to minimize electromagnetic interference (EMI).
Ensure proper grounding of the relay chassis to the panel ground bus to maintain signal integrity and safety.
Perform all wiring connections while the system is de-energized to prevent accidental short circuits or damage to the internal electronics.
Maintain adequate clearance around the unit to allow for proper heat dissipation and airflow.
FAQWhat is the primary function of the 750-P5-G5-HI-A1-R-E relay?This unit is a feeder management relay designed to provide protection, control, and monitoring for electrical distribution systems, specifically handling phase, ground, and sensitive current inputs.Does this relay require a specific power supply?Yes, this model supports a wide range of input power, specifically 80-300 V DC or 70-265 V AC at 48/62 Hz.What is the ambient operating temperature range?The device is rated for operation in temperatures ranging from -40 degC to +60 degC.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1747-SCNR is a ControlNet Scanner module designed for the SLC 500 programmable logic controller platform. This module facilitates high-speed communication between the SLC 500 processor and other devices on a ControlNet network, supporting distributed I/O and peer-to-peer messaging.Features
Provides ControlNet connectivity for SLC 500 systems.
Equipped with two BNC connectors for redundant or standard network media configurations.
Supports high-speed data transfer and deterministic communication.
Designed for integration into standard SLC 500 chassis.
Technical Specifications
Model
1747-SCNR
Platform
SLC 500
Backplane Current
850mA at 5V DC
ControlNet Ports
2 x BNC connectors
Network Power
24V DC (External)
Operating Temperature
0 degC to 60 degC
Relative Humidity
5-95% non-condensing
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module.
Slide the module into an available slot in the chassis and secure it using the provided retention screws.
Use appropriate ControlNet-rated coaxial cable and BNC connectors to ensure network integrity.
Maintain proper grounding practices for the ControlNet network to prevent signal interference.
Ensure adequate ventilation around the chassis to maintain operating temperatures within the 0-60 degC range.
FAQIs the 1747-SCNR still in production? No, this module has been discontinued by the manufacturer. We supply tested, reliable units to support legacy system maintenance.What is the primary function of this module? The 1747-SCNR acts as a scanner on a ControlNet network, allowing an SLC 500 controller to manage and exchange data with remote I/O and other controllers.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1734-OB8 is a high-density digital DC sourcing output module designed for the POINT I/O platform. It provides eight output channels capable of driving various 24V DC loads, making it suitable for distributed I/O applications in industrial automation environments.Features
8-point digital DC sourcing output configuration.
Electronically protected outputs for enhanced reliability.
Integrated module and network status indicators (green/red).
Dedicated logic-side status indicators (yellow) for each output channel.
Compact design optimized for space-constrained control cabinets.
Seamless integration with the POINTBus backplane.
Technical Specifications
Module Type
Digital DC Sourcing Output
Number of Outputs
8
Output Voltage Range
10-28.8V DC
Output Current
3 Amps per module
Power Dissipation
2.0 Watts / 6.8 BTU/hour
POINTBus Current
75 mA
Operating Temperature
Refer to system manual
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the POINT I/O base.
Mount the module on a standard DIN rail, ensuring it is securely seated in the base unit.
Verify that the module is compatible with the existing POINTBus backplane configuration.
Use appropriate shielded cabling for output signals to minimize electromagnetic interference (EMI).
Ensure proper grounding of the DIN rail system to maintain signal integrity and safety.
Maintain adequate clearance around the module to allow for proper thermal dissipation.
FAQWhat is the primary function of the 1734-OB8?The 1734-OB8 is a digital output module used to control 24V DC field devices such as solenoids, relays, or indicators within an Allen-Bradley POINT I/O system.Are the outputs protected?Yes, the 1734-OB8 features electronic protection to safeguard the module against short circuits or overcurrent conditions on the output channels.How do I monitor the status of the outputs?The module includes 8 yellow status indicators on the logic side, which provide visual confirmation of the state of each individual output channel.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB SAFT121PAC is a pulse amplifier board designed for industrial control applications. This component serves as a critical interface for signal conditioning and amplification within legacy ABB drive and control systems. As a discontinued manufacturer component, this board is often utilized as a direct replacement for maintenance and repair of existing installations.Features
Engineered for precise pulse signal amplification.
Compatible with specific ABB control architectures requiring the SAFT121 series.
Robust PCB construction suitable for industrial environments.
Direct replacement for legacy hardware identified by part number 57411503.
Technical Specifications
Manufacturer
ABB
Model Number
SAFT121PAC
Alternative Part Number
57411503
Product Type
Pulse Amplifier Board
Weight
0.6 kg
Installation Guidelines
Ensure the control system is powered down and locked out before attempting to remove or install the PCB.
Handle the board by its edges to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
Verify that all ribbon cables and terminal connections are securely seated and free of oxidation before applying power.
Ensure the mounting environment is free from excessive vibration, moisture, and conductive dust to maintain operational integrity.
Consult the original equipment manual for specific calibration or jumper settings required for your specific system configuration.
FAQIs the SAFT121PAC still in production?No, the SAFT121PAC has been discontinued by the manufacturer. We provide these units as spare parts for legacy system support.What is the alternative part number for this board?This unit is also identified by the part number 57411503.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB CI873AK01 Communication Interface Module
Configured for Ethernet communication interface execution in ABB System 800xA and AC 800M controller environments, the ABB CI873AK01 (CI873AK01 Communication Interface Module) provides direct physical network connectivity and data exchange functions. The module is cataloged under order code 3BSE092695R1 and supports communication tasks between controller hardware and external industrial networks.
Hardware Specifications
Parameter
Specification
Model
CI873AK01
Product ID
3BSE092695R1
Brand
ABB
Product Type
Communication Interface Module
System Compatibility
ABB System 800xA / AC 800M controller environment
Communication Function
Industrial network communication interface
Origin
Sweden
Installation Type
Controller system hardware mounting
Module Configuration
Communication interface package
ABB Industrial Communication Interface Architecture
The CI873AK01 operates as a communication interface component within ABB controller platforms. It manages data transfer between AC 800M control hardware and connected communication networks. Therefore, the module handles network interface processing while maintaining compatibility with ABB engineering and control system structures.
The module follows ABB industrial control architecture principles, including backplane communication handling, controller integration, and system-level data exchange. Additionally, CI873AK01 configurations support scalable communication structures where multiple automation devices exchange process and diagnostic information.
Frequently Asked Questions
Q: What is the primary function of the ABB CI873AK01 module?A: The CI873AK01 functions as a communication interface module that provides network communication capability for ABB System 800xA and AC 800M controller environments.
Q: Can the CI873AK01 be installed as an independent controller unit?A: No. The CI873AK01 operates as a dedicated communication hardware component and requires integration with compatible ABB controller system hardware.
Q: Does the CI873AK01 require firmware compatibility checks during replacement?A: Yes. Firmware and system configuration compatibility should be verified before replacement to ensure correct communication operation within the controller platform.
Field Installation Guidelines
Install the CI873AK01 according to ABB system installation procedures and approved cabinet design practices.
Verify controller compatibility and hardware configuration before installation.
Mount the module in the designated ABB controller system position.
Keep communication cables separated from high-voltage power wiring to reduce electrical interference.
Connect cable shields according to the cabinet grounding design and industrial EMC practices.
Confirm module status indicators after power-up and validate communication diagnostics through the engineering tool.
Perform firmware and configuration verification before placing the system into operational service.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB CI873K01 Ethernet/IP Interface
Configured for Ethernet/IP communication interface execution in ABB System 800xA control platforms, the ABB 3BSE056899R1 (CI873K01 Communication Module) provides direct physical network connectivity through the CI873 communication interface with TP867 baseplate integration.
Hardware Specifications
Parameter
Specification
Model
CI873K01
Product ID
3BSE056899R1
Brand
ABB
Product Type
Communication Module
Communication Interface
Ethernet/IP Interface
Included Components
CI873 Communication Interface, TP867 Baseplate
System Platform
ABB System 800xA / AC 800M communication architecture
Origin
Sweden
Weight
0.7 kg
Dimensions
127.5 mm depth x 186 mm height x 59 mm width
RoHS Compliance
EU Directive 2011/65/EU
WEEE Category
5. Small Equipment
Industrial Ethernet/IP Network Integration
The CI873K01 provides Ethernet/IP interface capability for ABB control system communication networks. Therefore, the module handles industrial Ethernet data exchange between connected devices and the controller environment through the configured communication interface.
Furthermore, the module supports ABB industrial control architectures where deterministic Profinet / EtherNet/IP network structures require defined communication paths. The CI873 communication interface uses the TP867 baseplate for mechanical installation and system integration.
The module belongs to ABB PLC/DCS communication hardware, where backplane bus communication and firmware compatibility determine the connection between communication modules and controller systems. Configuration parameters must match the installed ABB control system firmware and engineering environment.
Frequently Asked Questions
Q: What components are included with the CI873K01 package?A: The CI873K01 package includes the CI873 Communication Interface and TP867 Baseplate according to the supplied product specification.
Q: What communication function does the CI873K01 provide?A: The CI873K01 provides an Ethernet/IP interface function for ABB control system communication networks.
Q: Does the provided specification define operating temperature and power consumption values?A: No. The supplied technical data does not specify operating temperature limits or power consumption values.
Field Installation Guidelines
Install the CI873K01 on the designated ABB mounting arrangement with the TP867 baseplate correctly secured before electrical connection.
Verify that Ethernet/IP network wiring follows industrial installation practices. Maintain proper cable separation from high-voltage power conductors to reduce electromagnetic interference.
Connect protective grounding according to the control cabinet grounding design. Confirm shielding continuity for communication cables where required by the system installation standard.
Before commissioning, check module seating, connector engagement, network addressing, and controller configuration compatibility.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB DI802 Digital Input Module
The ABB DI802, also cataloged as the DI802 Digital Input Module, operates as a dedicated hardware component for 120 V AC/DC discrete signal acquisition within the ABB S800 I/O system. The module provides 8 individually isolated digital input channels with current sinking signal processing, optical isolation, EMC protection, and configurable digital filtering for industrial control applications.
Hardware Specifications
Parameter
Specification
Model
DI802 3BSE022360R1
Brand
ABB
Product Type
Digital Input Module
System Platform
ABB S800 I/O
Signal Specification
120 V AC, 110 V DC
Number of Channels
8
Signal Type
Current sinking
HART Support
No
SOE Support
No
Redundancy
No
High Integrity
No
Intrinsic Safety
No
Mechanics
S800L
Input Voltage Range Logic "0"
0 to 30 V AC, 0 to 20 V DC
Input Voltage Range Logic "1"
77 to 130 V AC, 75 to 145 V DC
Input Current
10 mA at 120 V AC, 2.8 mA at 110 V DC
Input Impedance
12 kOhm AC, 39 kOhm DC
Isolation
Individually isolated channels
Filter Times
2 ms, 4 ms, 8 ms, 16 ms selectable
Input Frequency Range
47 to 63 Hz
Maximum Field Cable Length
200 m for AC, 600 m for DC
Rated Insulation Voltage
250 V
Dielectric Test Voltage
2000 V AC
Power Dissipation
Typical 2.8 W
Current Consumption +5 V Modulebus
50 mA
Current Consumption +24 V Modulebus
0 mA
Current Consumption +24 V External
0 mA
Dimensions
110 x 86.1 x 58.5 mm
Weight
0.24 kg
Operating Temp
0 to +55 deg C
Storage Temp
-40 to +70 deg C
Relative Humidity
5 to 95 %, non-condensing
Protection Class
IP20 according to IEC 60529
Power Consumption
Typical 2.8 W
Backplane Bus Communication and I/O Signal Processing
The ABB DI802 integrates with the S800 I/O backplane architecture to transfer digital input status data to the controller. The module processes field voltage signals through current limiting components, EMC protection circuits, input status LEDs, and optical isolation barriers.
Furthermore, each input channel operates independently to maintain channel separation. The module supports selectable digital filtering times of 2 ms, 4 ms, 8 ms, and 16 ms, allowing signal conditioning according to field device switching characteristics.
The input design supports industrial AC and DC discrete signals while maintaining electrical isolation between field wiring and the S800 I/O communication interface.
Frequently Asked Questions
Q: Does the ABB DI802 support redundant operation or high integrity configurations?A: No. The DI802 does not support redundancy, high integrity functions, or SIL-related configurations. It operates as a standard S800 I/O digital input module.
Q: How does the DI802 isolate field input signals?A: Each input channel uses optical isolation with EMC protection and current limiting components to separate field signals from internal electronics.
Q: What diagnostic functions are available on the DI802?A: The module provides status indication through front LEDs and supports process voltage supervision on channel 8 with module error, module warning, and channel error indications.
Field Installation Guidelines
Install the ABB DI802 on the designated S800 I/O mounting arrangement and verify correct module addressing before system commissioning.
Connect field wiring according to the approved terminal assignment. Maintain separation between AC field signal cables and sensitive communication wiring to reduce electrical interference.
Use shielded cables where required by the installation environment and connect shields according to the plant grounding standard. Verify conductor size, terminal torque, and insulation condition before energizing the module.
Confirm that the field voltage matches the specified input range of 77 to 130 V AC or 75 to 145 V DC before operation. Check LED status after power-up to validate channel state and module diagnostics.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB DI810 Digital Input Module
The ABB DI810 3BSE008508R2, also cataloged as the DI810 Digital Input Module, provides direct electrical signal acquisition for digital field devices within ABB S800 I/O system platforms. The module receives 24 VDC process signals and transfers channel status data to the controller through the I/O communication interface.
Hardware Specifications
Parameter
Specification
Model
DI810 3BSE008508R2
Brand
ABB
Product Type
Digital Input Module
Origin
Sweden
Operating Temp
0 deg C to +55 deg C
Power Consumption
Not specified
Number of Channels
16 digital input channels
Input Voltage
24 VDC
Input Current
Typ. 6 mA per channel
Channel Isolation
Isolated input design
Signal Indication
Individual channel LED status indication
Mounting Type
DIN rail mounting with S800 I/O infrastructure
Diagnostics
Module and channel status monitoring
ABB Industrial I/O Backplane and Communication Integration
The DI810 operates as an ABB S800 I/O digital acquisition module and exchanges channel information through the system backplane communication interface. The module supports I/O density scaling by providing multiple discrete input channels within a compact hardware format.
Furthermore, the module architecture includes electrical isolation between field input circuits and internal logic circuits. This design separates process wiring from controller electronics and supports stable digital signal handling in industrial control installations.
Frequently Asked Questions
Q: How many digital input channels does the ABB DI810 provide?A: The DI810 provides 16 digital input channels for 24 VDC field signal acquisition.
Q: Does the DI810 provide electrical isolation between field signals and internal electronics?A: Yes. The module uses an isolated input design to separate field signal circuits from internal module logic.
Q: What type of field signals can connect to the DI810?A: The module accepts standard 24 VDC digital signals from industrial field devices such as switches, sensors, and status contacts.
Field Installation Guidelines
Install the DI810 module on the designated ABB S800 I/O mounting structure according to system hardware documentation.
Verify that field wiring polarity matches the digital input terminal configuration before applying operating voltage.
Route digital signal cables separately from high-voltage power cables and high-frequency switching conductors to reduce electrical interference.
Connect cable shields according to the site grounding standard and avoid multiple grounding points that may introduce signal noise.
Confirm LED channel indications after installation to verify correct field device switching status.
Check controller configuration parameters before placing the module into active process operation.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB DI825 Digital Input Module
The ABB DI825 3BSE008552R1, also cataloged as the DI825 Digital Input Module, provides 48 VDC discrete signal acquisition for S800 I/O systems through isolated input channels and ModuleBus diagnostics.
Hardware Specifications
Parameter
Specification
Model
DI825 3BSE008552R1
Brand
ABB
Origin
Sweden
Weight
0.15 kg
Dimensions
45 mm W x 102 mm D x 119 mm H
Operating Temp
0 to +55 deg C
Power Consumption
Typ. 2.7 W
Product Type
Digital Input Module
Series
S800 I/O
Signal Specification
48 VDC
Number of Channels
16
Signal Type
Current sinking
Input Voltage Range "0"
-60 to +10 VDC
Input Voltage Range "1"
30 to 60 VDC
Input Current
4 mA at 48 VDC
Input Impedance
11 kOhm
Isolation
Two isolated groups with 8 channels each
Filter Times
2 ms, 4 ms, 8 ms, 16 ms selectable
Maximum Field Cable Length
600 m
Rated Insulation Voltage
50 V
Dielectric Test Voltage
500 VAC
ModuleBus Current Consumption +5 V
50 mA
ModuleBus Current Consumption +24 V
0
External +24 V Current Consumption
0
HART Support
No
SOE Function
No
Redundancy Support
No
High Integrity Function
No
Intrinsic Safety
No
MTU Compatibility
TU810, TU812, TU814, TU818, TU830, TU833, TU838, TU850
Keying Code
BD
Protection Class
IP20 according to IEC 60529
Relative Humidity
5 to 95 %, non-condensing
Storage Temperature
-40 to +70 deg C
EMC Standard
EN 61000-6-4 and EN 61000-6-2
Safety Standard
EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
RoHS Compliance
EU RoHS, UAE RoHS, CN RoHS
ABB S800 I/O Backplane and I/O Density Characteristics
The DI825 operates within the ABB S800 I/O platform and communicates through the ModuleBus interface. The module uses ABB backplane bus communication architecture to transfer diagnostic states and input data between field channels and the controller system.
Furthermore, the module structure supports I/O density scaling by providing 16 digital input channels in a compact S800 form factor. Each input channel includes current limiting components, EMC protection components, LED status indication, and an optical isolation barrier.
The input channels are arranged into two electrically isolated groups. Each group contains eight channels and one process voltage supervision input. Therefore, the module can detect loss of field supply voltage and report channel-related error conditions through the ModuleBus diagnostic system.
Frequently Asked Questions
Q: How does the DI825 handle input channel isolation?A: The DI825 uses two individually isolated input groups, with eight channels in each group. Each input channel includes an optical isolation barrier and EMC protection components.
Q: What diagnostic information is available through ModuleBus?A: The module provides module error, module warning, and channel error status. Process voltage supervision signals are transferred through the ModuleBus interface.
Q: Can the DI825 operate with redundant configurations?A: No. The DI825 is specified as a non-redundant digital input module for S800 I/O applications.
Field Installation Guidelines
Install the DI825 module using a compatible ABB S800 MTU according to the selected terminal configuration. Verify that the TU810, TU812, TU814, TU818, TU830, TU833, TU838, or TU850 MTU matches the module keying code before installation.
Route field signal cables separately from high-voltage power conductors to reduce electromagnetic interference. Connect cable shielding according to the site grounding practice and applicable EMC installation requirements.
Confirm the 48 VDC field supply polarity before energizing the input circuits. Check the front LED indicators after startup to verify module operation, channel states, and process voltage supervision status.
Avoid exceeding the specified field cable length and environmental limits. Maintain enclosure protection requirements to preserve the IP20 installation rating.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB DI818 3BSE069052R1 Digital Input Module
Configured for 24 VDC digital signal acquisition in the ABB S800 I/O system, the ABB DI818 3BSE069052R1 (DI818 Digital Input Module) provides direct electrical input processing through 32 isolated channels for industrial control applications.
Hardware Specifications
Parameter
Specification
Model
DI818 3BSE069052R1
Brand
ABB
Product Type
Digital Input Module
System Platform
ABB S800 I/O
Input Type
24 VDC Digital Input
Number of Input Channels
32
Channel Configuration
Isolated in two groups of 16 channels
Channel Type
DI
Module Termination Unit Compatibility
TU818, TU819, TU830
Origin
Sweden
Weight
0.2 kg
Dimensions
102 mm depth x 119 mm height x 45 mm width
Product Classification
I-O Module
RoHS Compliance
EU Directive 2011/65/EU
WEEE Category
Category 5 Small Equipment
ABB S800 I/O Backplane and I/O Density Scaling
The DI818 integrates with the ABB S800 I/O architecture through the module backplane communication interface. Therefore, the module supports high-density digital input deployment with 32 channels arranged into two electrically isolated groups of 16 channels.
The isolated channel grouping reduces signal interaction between field circuits and the control system. Additionally, the module termination units TU818, TU819, and TU830 provide the required field wiring interface for cabinet installation and signal distribution.
Frequently Asked Questions
Q: How are the DI818 input channels electrically organized?A: The DI818 contains 32 digital input channels divided into two isolated groups of 16 channels. Each group operates as an independent field signal section.
Q: Which termination units support the DI818 module?A: The DI818 is designed for use with ABB TU818, TU819, and TU830 Module Termination Units for field connection.
Q: Can the DI818 be installed in systems requiring channel isolation?A: Yes. The module provides electrical isolation between the two groups of 16 input channels, supporting separated field signal wiring configurations.
Field Installation Guidelines
Install the DI818 module on the compatible ABB S800 I/O carrier according to ABB system installation procedures.
Verify that the selected Module Termination Unit matches the field wiring requirements before connection.
Separate low-level signal cables from high-voltage power wiring to reduce electrical interference.
Connect field cable shields according to the cabinet grounding design and local electrical standards.
Confirm the 24 VDC input wiring polarity before applying field power.
Check module status indicators after installation to verify correct communication and input operation.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
ABB DI821 3BSE008550R1 S800 Digital Input Module
The ABB DI821 3BSE008550R1, also cataloged as the DI821 Digital Input Module, operates as a dedicated hardware component for 230 V AC/DC discrete signal acquisition within the ABB S800 I/O system. It provides 8 individually isolated input channels with voltage supervision functions, optical isolation barriers, EMC protection, and configurable input filtering.
Hardware Specifications
Parameter
Specification
Model
DI821 3BSE008550R1
Brand
ABB
Product Type
Digital Input Module
Series
S800 I/O
Origin
Sweden
Weight
0.18 kg
Dimensions
45 mm W x 102 mm D x 119 mm H
Operating Temp
0 to +55 deg C
Power Consumption
Typical 2.8 W
Signal Type
Current sinking
Number of Channels
8
Signal Specification
230 V AC, 220 V DC
AC Input Voltage Range
164 to 264 V AC
DC Input Voltage Range
175 to 275 V DC
Input Current
11 mA at 230 V AC; 1.6 mA at 220 V DC
Input Impedance
21 kOhm AC / 134 kOhm DC
Isolation
Individually isolated channels
Digital Filter Time
2, 4, 8, 16 ms selectable
Analog Filter Delay
5 / 28 ms On/Off delay
Input Frequency Range
47 to 63 Hz
Rated Insulation Voltage
250 V
Dielectric Test Voltage
2000 V AC
ModuleBus Current Consumption
+5 V ModuleBus: 50 mA
+24 V ModuleBus Consumption
0 mA
+24 V External Consumption
0 mA
HART Support
No
SOE Function
No
Redundancy Support
No
High Integrity
No
Intrinsic Safety
No
Compatible MTU
TU811, TU813, TU831, TU839, TU851
Keying Code
AC
Protection Class
IP20 according to IEC 60529
Relative Humidity
5 to 95 %, non-condensing
Storage Temperature
-40 to +70 deg C
EMC Compliance
EN 61000-6-4 and EN 61000-6-2
Safety Standards
EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
Marine Certification
ABS, BV, DNV, LR
RoHS Compliance
EU RoHS, UAE RoHS, CN RoHS
ABB S800 I/O Industrial Signal Processing
The ABB DI821 integrates with the S800 I/O architecture through ModuleBus communication and supports high-voltage discrete signal monitoring. Each input channel includes current limiting components, EMC protection components, LED status indication, optical isolation, and a 6 ms analog filter.
Furthermore, the module provides process voltage supervision through dedicated channel monitoring. Channel 1 supervises channels 2 to 4, while channel 8 supervises channels 5 to 7. When the monitored supply voltage disappears, the module activates the corresponding error input and Warning LED indication. The diagnostic information is transferred through the ModuleBus interface.
The DI821 supports ABB industrial control installations requiring dense digital I/O scaling, S800 backplane communication, and firmware-compatible module integration. Its isolated channel design separates field voltage signals from internal electronics to maintain electrical separation between process circuits and control hardware.
Frequently Asked Questions
Q: How does the DI821 provide electrical isolation between input channels?A: The DI821 uses individually isolated input channels. Each channel contains an optical isolation barrier together with EMC protection and current limiting components.
Q: Can the DI821 monitor loss of field supply voltage?A: Yes. Channel 1 and Channel 8 can operate as voltage supervision inputs for separate channel groups. The module reports supervision errors through the ModuleBus interface.
Q: What MTU units are compatible with the DI821 module?A: The DI821 supports TU811, TU813, TU831, TU839, and TU851 MTU configurations with AC keying code.
Field Installation Guidelines
Install the DI821 module only in compatible ABB S800 I/O assemblies with the correct AC keying configuration. Verify that the selected MTU matches the module specification before wiring field circuits.
Connect field wiring according to ABB installation documentation. Maintain separation between high-voltage AC/DC signal wiring and low-level communication or instrumentation wiring to reduce electromagnetic interference.
Use proper grounding methods for cabinet assemblies and ensure cable shields follow the site grounding practice. Confirm input polarity, voltage level, and channel assignment before energizing the module.
Check front LED indicators after installation. Verify Run, Fault, Warning, and channel status indications through the controller diagnostic interface before placing the I/O point into service.
15 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
