Allen-Bradley, merek Rockwell Automation, menyediakan beragam produk otomasi industri. Mulai dari PLC dan panel HMI hingga modul dan pengontrol I/O, solusi Allen-Bradley menjamin kontrol industri yang andal, efisien, dan terukur untuk pabrik-pabrik di seluruh dunia.
The Allen-Bradley 1746-FIO4V is a high-performance Fast Analog I/O module designed for the SLC 500 control platform. This module provides specialized signal processing capabilities, featuring two high-speed analog input channels and two analog voltage output channels, suitable for applications requiring rapid response times and precise signal conversion.Features
Integrated I/O configuration with 2 fast analog inputs and 2 analog voltage outputs.
Supports versatile input/output ranges including +/-10V DC, 0-10V DC, 0-20mA, and 4-20mA.
High-speed processing capability with a slew rate of 2V/ms.
Accuracy rated at +/-0.2% of full scale for reliable process control.
Designed for seamless integration into the SLC 500 backplane.
Technical Specifications
Product Model
1746-FIO4V
Manufacturer
Allen-Bradley
Input Channels
2
Output Channels
2
Voltage Ranges
+/-10V DC, 0-10V DC
Current Ranges
0-20mA, 4-20mA
Accuracy
+/-0.2% of full scale
Slew Rate
2V/ms
Backplane Power
5V DC
Isolation Voltage
500V AC (continuous)
Operating Temperature
0 degC to 60 degC
Storage Temperature
-40 degC to 85 degC
Humidity
5% to 95% (non-condensing)
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical damage.
Verify that the module is fully seated in the chassis slot and secured with the retaining screws.
Use shielded twisted-pair cabling for analog signals to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the chassis and signal shields to ensure operational stability.
Keep the module away from high-voltage wiring and heat-generating equipment to maintain specified operating temperatures.
FAQWhat is the primary function of the 1746-FIO4V?This module is designed for fast analog data acquisition and control, offering a 2V/ms slew rate for applications where standard analog modules may be too slow.Does this module support current outputs?The 1746-FIO4V is primarily configured for voltage outputs; please refer to the technical specifications for supported input current ranges.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1746-C9 is a specialized 36-inch (0.91-meter) ribbon interconnect cable engineered for the SLC 500 modular control system. This component facilitates reliable communication and power distribution between multiple chassis within an industrial control cabinet, enabling the expansion of I/O capacity across secondary or tertiary rack configurations.Features
System Expansion: Supports the daisy-chaining of SLC 500 modular chassis (1746-A4, A7, A10, A13) to extend system I/O beyond a single rack.
Optimal Length: Provides a 3-foot reach, ideal for cabinets where chassis are mounted in stacked or adjacent configurations.
Compatibility: Fully compatible with SLC 5/01, 5/02, 5/03, 5/04, and 5/05 processor-based systems.
Robust Design: Ribbon-style construction ensures secure signal integrity between backplanes while maintaining flexibility for routing within tight enclosure spaces.
ApplicationsThis cable is intended for use in Allen-Bradley SLC 500 installations requiring multi-chassis expansion. It is commonly deployed in manufacturing environments where I/O requirements necessitate additional rack space beyond the primary processor chassis.Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Cable Type
Chassis Interconnect
Length
0.91 m (36 in)
Max System Expansion
3 chassis total
Bend Radius
101.6 mm (4 in)
Operating Temperature
0 to 60 degC (32 to 140 degF)
Installation Guidelines
Ensure the PLC system power is disconnected before installing or removing the interconnect cable.
Align the ribbon cable connectors carefully with the backplane ports on both chassis to prevent pin damage.
Maintain the minimum bend radius of 101.6 mm to avoid stress on the internal ribbon conductors.
Route the cable away from high-voltage wiring, AC power lines, and sources of significant electromagnetic interference (EMI).
Verify that all chassis are properly grounded to the enclosure backplane to ensure signal stability.
FAQWhat is the maximum distance supported by the 1746-C9?The cable is designed for a maximum reach of 36 inches, allowing for flexible mounting of chassis within an enclosure while maintaining required signal integrity.Can I use this cable with any SLC 500 chassis?Yes, the 1746-C9 is compatible with all modular 1746 chassis, including the 4-slot (A4), 7-slot (A7), 10-slot (A10), and 13-slot (A13) versions.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1746-IO12 is a combination I/O module designed for the SLC 500 programmable logic controller system. This module provides a compact solution for control applications requiring both discrete input monitoring and relay-based output control within a single slot of the SLC 500 chassis.Features
Integrated design featuring 6 discrete inputs and 6 relay outputs.
Input voltage compatibility rated for 120 VAC operation.
Flexible output voltage range supporting 24-125 VDC or 120-240 VAC loads.
Designed for seamless integration with the SLC 500 backplane.
Compact form factor optimized for rack-based industrial control environments.
ApplicationsThis combination module is suitable for various industrial automation tasks, including machine control, process monitoring, and small-scale relay logic operations where space in the controller chassis is limited.Technical Specifications
Product Model
1746-IO12
Input Points
6
Input Voltage
120 VAC
Output Points
6
Output Type
Relay
Output Voltage Range
24-125 VDC / 120-240 VAC
Backplane Current Draw
70-90 mA
Manufacturer
Allen-Bradley
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module.
Verify that the module is fully seated in the chassis slot to ensure proper backplane connection.
Use appropriate shielded cabling for input signals to minimize electromagnetic interference (EMI).
Maintain adequate clearance around the module to allow for proper ventilation and heat dissipation.
Follow all local electrical codes and safety standards regarding AC voltage wiring and relay load protection.
FAQIs the 1746-IO12 still in production?No, this model has been discontinued by the manufacturer. We provide high-quality surplus or refurbished units to support legacy system maintenance.What is the primary function of this module?The 1746-IO12 serves as a combination module, allowing the SLC 500 system to interface with 120 VAC sensors while simultaneously controlling external devices through its onboard relay outputs.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1746-HSRV is a specialized servo control module designed for the SLC 500 programmable controller system. This module provides precise motion control capabilities by outputting an analog velocity command, allowing for seamless integration with a variety of Rockwell Automation servo drives and motion control components.Features
Single-slot module design for efficient SLC 500 chassis utilization.
Provides one analog velocity command output with programmable limits up to +/- 10 V DC.
Features 3 integrated 24 VDC inputs for status monitoring or feedback.
Supports flexible integration with standard Rockwell Automation servo drive interfaces.
ApplicationsThis module is primarily utilized in industrial motion control applications where precise velocity regulation is required. It is commonly deployed in packaging machinery, material handling systems, and automated assembly equipment where SLC 500 platforms manage coordinated motion.Technical Specifications
Model
1746-HSRV
Module Type
Servo Control Module
Inputs
3 x 24 VDC
Outputs
1 x Analog Velocity Command (+/- 10 V DC)
Slot Requirement
Single Slot
Operating Temperature
0 to 60 degC (32 to 140 degF)
Storage Temperature
-40 to 85 degC (-40 to 185 degF)
Relative Humidity
5 to 95% (non-condensing)
Installation Guidelines
For optimal performance and to minimize signal interference, install the 1746-HSRV module as close as possible to the processor in the SLC 500 chassis.
Ensure the system power is disconnected before inserting or removing the module from the backplane to prevent electrical damage.
Verify that all field wiring is properly shielded to protect the analog velocity command signal from electromagnetic noise.
Maintain proper ventilation in the control cabinet to ensure operating temperatures remain within the specified 0 to 60 degC range.
FAQIs the 1746-HSRV compatible with all SLC 500 processors?The module is designed for the SLC 500 series, but compatibility should be verified against your specific processor firmware and chassis power supply capacity.What is the primary function of the analog output?The output provides a programmable +/- 10 V DC signal used to command the velocity of an external servo drive system.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1746-A7 is a robust 7-slot modular chassis specifically engineered for the SLC 500 programmable controller system. This chassis provides a reliable backplane for mounting the controller processor, power supply, and various I/O or specialty modules. It is ideal for mid-sized automation applications where a compact footprint is required while maintaining sufficient capacity for system expansion and diverse module integration.Features
Seven-slot capacity for flexible I/O and processor configuration.
Slot 0 reserved for the SLC 500 processor or remote I/O adapter.
Supports local expansion by linking up to two additional chassis units.
Compatible with 1746-C series interconnect cables for backplane communication.
Integrated backplane for high-speed data transfer between modules.
Panel-mount design with four secure mounting tabs for vibration-resistant installation.
ApplicationsThis chassis is a fundamental component for Allen-Bradley SLC 500 control systems, widely utilized in industrial manufacturing, process control, and machine automation environments. It serves as the physical backbone for distributed or standalone control architectures requiring scalable I/O density.Technical Specifications
Brand
Allen-Bradley
Product Series
SLC 500
Slot Count
7
Backplane Current (5.1V DC)
10 A
Backplane Current (24V DC)
2.88 A
Mounting
Panel Mount
Operating Temperature
0 to 60 degC
Storage Temperature
-40 to 85 degC
Relative Humidity
5 to 95% (Non-condensing)
Weight
1.22 kg
Installation Guidelines
Ensure the mounting surface is flat and capable of supporting the weight of the chassis and all installed modules.
Use appropriate SEM or Phillips screws with star washers to secure the chassis via the four mounting tabs.
Always disconnect power from the chassis before installing or removing any modules to prevent electrical damage.
Maintain adequate clearance around the chassis to ensure proper airflow and cooling, adhering to the specified operating temperature range.
When using multiple chassis, ensure the 1746-C series cables are securely seated to maintain backplane communication integrity.
Ensure proper grounding of the chassis to a low-impedance ground point to minimize EMI susceptibility.
FAQCan I use this chassis with any SLC 500 processor?Yes, the 1746-A7 is designed for the SLC 500 series and supports standard processors and remote I/O adapters in the designated Slot 0.How many total slots are available for I/O modules?The chassis has 7 total slots; Slot 0 is dedicated to the processor or adapter, leaving 6 slots available for I/O and specialty modules.Is it possible to expand this system?Yes, you can connect this chassis to up to two additional 1746 chassis using the 1746-C series interconnect cables.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1746-IO12DC is a compact, single-slot combination I/O module engineered for the SLC 500 control platform. This module provides a space-efficient solution for automation systems by consolidating six 24V DC sinking inputs and six independent relay contact outputs into one unit, reducing the total rack space required for mixed-signal applications.Features
Hybrid I/O Configuration: Combines 6 sinking DC inputs and 6 relay outputs for versatile field device interfacing.
Flexible Relay Switching: Relay outputs support a wide range of AC and DC load voltages, enabling the control of diverse equipment like solenoid valves, indicators, and motor starters.
Wide Input Range: Compatible with standard 24V DC industrial control signals (10-30V DC operating range).
Space-Optimized: Designed as a single-slot module to maximize density in SLC 500 chassis environments.
ApplicationsThis module is well-suited for small-to-medium scale industrial control tasks where limited I/O count is required. Typical applications include machine control, conveyor systems, and distributed I/O nodes where a mix of sensor inputs and actuator outputs must be managed within a constrained footprint.Technical Specifications
Model
1746-IO12DC
Inputs
6 (24V DC Sinking)
Outputs
6 (Relay Contacts)
Input Voltage
10 to 30V DC
Output Voltage (AC)
5 to 265V AC (47-63 Hz)
Output Voltage (DC)
5 to 125V DC
Input Signal Delay
8 ms (Nominal)
Output Signal Delay
35 ms (ON) / 45 ms (OFF)
Backplane Current (5V)
80 mA
Backplane Current (24V)
60 mA
Operating Temperature
0 to 60 degC
Installation Guidelines
Power Status: Always disconnect backplane power before inserting or removing the module from the SLC 500 chassis to prevent electrical damage.
Mounting: Ensure the module is fully seated in the chassis slot and the locking tabs are engaged to maintain proper backplane connection.
Wiring: Route input and output wiring through separate conduits where possible to minimize electromagnetic interference (EMI) from high-power circuits.
Environment: Maintain adequate ventilation within the enclosure to ensure the ambient temperature remains within the 0 to 60 degC operating range.
FAQCan I use this module with any SLC 500 processor?Yes, the 1746-IO12DC is compatible with standard Allen-Bradley SLC 500 chassis and processor configurations supporting the 1746 I/O line.Are the relay outputs isolated?The relay outputs are independent contacts, allowing for flexibility in switching different voltage levels, provided they remain within the specified AC/DC current and voltage ratings.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1746-NT4 is a high-performance, 4-point thermocouple input module designed for integration with the SLC 500 programmable logic controller system. This module provides precise temperature monitoring capabilities, supporting a wide range of thermocouple types to accommodate diverse industrial process requirements.Features
4-point analog input configuration for thermocouple sensors.
Supports multiple thermocouple types including B, E, J, K, N, R, S, and T.
Configurable voltage input ranges of 50 mV or 100 mV.
Designed specifically for the SLC 500 series architecture.
Compact module form factor for efficient rack mounting.
Technical Specifications
Model Number
1746-NT4
Module Type
Thermocouple Input Module
Input Channels
4
Supported Thermocouples
B, E, J, K, N, R, S, T
Input Range
50 mV or 100 mV
Series Compatibility
Allen-Bradley SLC 500
Weight
0.26 kg
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the 1746-NT4 module.
Handle the module by the edges and avoid touching the backplane connectors to prevent electrostatic discharge (ESD) damage.
Ensure the module is fully seated in the chassis slot and secured using the top and bottom retaining screws.
Use shielded thermocouple extension wire to minimize electromagnetic interference (EMI) in industrial environments.
Verify that the thermocouple polarity matches the module input terminals to ensure accurate temperature readings.
Maintain proper ventilation within the control cabinet to prevent overheating of the I/O rack.
FAQIs this module still available from the manufacturer? No, the 1746-NT4 has been discontinued by Allen-Bradley. We provide this unit as a reliable spare part solution for legacy system maintenance.What thermocouple types are compatible with this module? The 1746-NT4 supports types B, E, J, K, N, R, S, and T, making it highly versatile for various temperature sensing applications.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1746-HT is a specialized termination panel designed for use within the SLC 500 control system architecture. This module provides a robust interface for field wiring, facilitating the connection of high-speed I/O, encoders, and drive signals to the controller backplane. By consolidating field connections, the 1746-HT simplifies system maintenance and improves signal integrity in demanding industrial environments.Features
High-speed input capability supporting frequencies up to 250 kHz.
Supports integration with E-stop circuits, encoders, and drive control systems.
Designed for efficient rack mounting within standard SLC 500 configurations.
Provides external power distribution for 5VDC, 15VDC, and 24VDC requirements.
Reduces wiring complexity through centralized signal termination.
Technical Specifications
Product Model
1746-HT
Function
Termination Panel
Input Frequency
250 kHz
Backplane Current (5VDC)
200 mA
Backplane Current (24VDC)
90 mA
Mounting
Rack
Tariff Code
8537101190
Installation Guidelines
Ensure all power is disconnected from the SLC 500 backplane before installing or removing the 1746-HT module to prevent electrical damage.
Verify that the rack slot is free of debris and that the module is properly seated in the chassis guide rails.
Use appropriate shielded cabling for high-speed encoder and drive signals to minimize electromagnetic interference (EMI).
Maintain proper grounding practices to ensure signal stability, especially when interfacing with external 5V, 15V, or 24V power sources.
Follow local electrical codes for all field wiring terminations to ensure safe operation.
FAQWhat is the primary function of the 1746-HT?The 1746-HT acts as a termination panel for the Allen-Bradley SLC 500 system, specifically engineered to manage high-speed I/O signals, such as those from encoders or drives, while providing necessary voltage levels to field devices.Is this module compatible with standard SLC 500 racks?Yes, the 1746-HT is designed for integration into the SLC 500 rack-based system, allowing for seamless communication with the controller backplane.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Description
The Allen-Bradley 1746-N2 is a protective hardware component specifically engineered for the SLC 500 modular chassis system. As a non-electronic slot filler module, it is designed to occupy empty or unused slots within 1746-A4, 1746-A7, 1746-A10, or 1746-A13 chassis. Its primary function is to maintain the mechanical and environmental integrity of the PLC rack assembly by protecting exposed backplane connectors from dust, debris, and physical damage.
Features
Contaminant Protection: Prevents dust, metallic shavings, and environmental debris from entering open backplane slots, reducing the risk of short circuits or signal interference.
Airflow Management: Helps maintain optimal cooling airflow patterns across the chassis, ensuring active modules operate within their thermal limits.
System Integrity: Ensures the chassis assembly complies with safety standards, including EN 61131-2 and the Low Voltage Directive, supporting Class I, Division 2 hazardous location ratings.
Compatibility: Designed for universal use across all 1746 SLC 500 modular chassis backplanes.
Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Hardware Type
Slot Filler (Non-Electronic)
Chassis Compatibility
All 1746 SLC 500 Modular Chassis
Operating Temperature
-25 to 60 degC (-13 to 140 degF)
Storage Temperature
-40 to 85 degC (-40 to 185 degF)
Relative Humidity
5% to 95% (non-condensing)
Operating Vibration
2g at 10 to 500 Hz
Operating Shock
30g
Weight
0.045 kg
Installation Guidelines
Ensure the chassis power is off before installing or removing any module or filler.
Align the 1746-N2 with the card guides of the empty slot.
Slide the module into the chassis until it is fully seated against the backplane.
Secure the module using the built-in latching mechanism to prevent accidental dislodgement due to vibration.
Maintain a clean environment during installation to prevent debris from entering the backplane connectors.
FAQ
Is the 1746-N2 an electronic module?
No, the 1746-N2 is a passive, non-electronic mechanical component. It contains no circuitry and does not require any configuration or software setup.
Why is it necessary to install a slot filler?
Installing slot fillers is essential for maintaining the IP rating of your chassis, preventing the ingress of conductive dust, and ensuring that cooling air is directed through the active modules rather than escaping through empty slots.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1746-IO12DC is a combination I/O module designed for the SLC 500 programmable controller system. This module provides a space-saving solution by integrating both digital inputs and relay outputs into a single slot. It features 6 DC input points and 6 relay output points, making it suitable for applications requiring a mix of signal monitoring and load switching within a compact footprint.Features
6 DC Input points (10-30 VDC range).
6 Relay Output points for flexible load switching.
Integrated design reduces rack space requirements in SLC 500 chassis.
Designed for standard industrial control environments.
Status indicators for monitoring I/O point activity.
ApplicationsThis module is commonly utilized in industrial automation tasks where limited chassis space necessitates a high-density combination of discrete inputs and relay outputs. Typical applications include machine control, process monitoring, and small-scale automation systems where direct control of actuators or contactors via relay outputs is required alongside DC sensor inputs.Technical Specifications
Product Model
1746-IO12DC
Module Type
Combination I/O Module
Input Points
6 DC Inputs
Output Points
6 Relay Outputs
Voltage Range
10-30 VDC
Manufacturer
Allen-Bradley
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical damage.
Verify the module is fully seated in the chassis slot and secured with the top and bottom mounting screws.
Use appropriate wire gauges and ensure all terminal connections are tightened to the specified torque to prevent loose connections and intermittent signals.
Route signal wiring away from high-voltage power lines and sources of electromagnetic interference (EMI) to maintain signal integrity.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect internal electronic components.
FAQIs the 1746-IO12DC still in production?No, the 1746-IO12DC has been discontinued by the manufacturer, with the official cancellation date being August 31, 2018.What is the primary function of this module?This is a combination I/O module that provides 6 DC input channels and 6 relay output channels, allowing for both monitoring and control capabilities within a single SLC 500 I/O slot.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1746-HSCE2 is a high-performance, multi-channel high-speed counter module designed for the SLC 500 programmable logic controller system. This module provides advanced counting capabilities for industrial applications requiring precise position, speed, or flow monitoring. It supports both single-ended and differential quadrature encoder inputs, making it a versatile solution for high-speed motion control and process measurement tasks.Features
Supports high-frequency counting up to 1 MHz.
Configurable input voltage ranges for 5VDC and 24VDC signals.
Includes 4 single-ended inputs and 2 differential quadrature inputs.
Features 4 physical outputs for direct control and 4 virtual outputs for internal logic processing.
Designed for seamless integration into the SLC 500 chassis.
ApplicationsThis module is typically utilized in industrial automation environments for tasks such as high-speed conveyor belt tracking, rotary encoder feedback, flow meter pulse counting, and precise position control in packaging or assembly machinery.Technical Specifications
Product Model
1746-HSCE2
Input Voltage (Nominal)
5VDC / 24VDC
Operating Voltage Range
4.2V to 12V DC / 10V to 30V DC
Max Input Frequency
1 MHz
Min Pulse Width
475 ns
Min Phase Separation
200 ns
Physical Outputs
4
Output Voltage Range
10-30 VDC
Installation Guidelines
Ensure the SLC 500 system power is disconnected before inserting or removing the module from the chassis.
Use shielded cables for all high-speed input signals to minimize electromagnetic interference (EMI).
Route signal cables away from high-voltage power lines and AC motor drive cabling.
Verify that the module is firmly seated in the backplane connector and secured with the chassis mounting screws.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to prevent damage to internal circuitry.
FAQWhat is the primary function of the 1746-HSCE2?The 1746-HSCE2 is a high-speed counter module that processes high-frequency pulses from encoders or sensors, allowing the SLC 500 controller to track position or speed accurately at rates up to 1 MHz.Can this module operate with both 5V and 24V sensors?Yes, the module supports nominal input voltages of 5VDC and 24VDC, with specific operating ranges defined in the technical specifications.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1746-OX8 is a high-performance relay output module designed for the SLC 500 programmable logic controller system. This module provides 8 isolated relay contact outputs, allowing for the control of various field devices such as motor starters, solenoids, and indicators. The 1746-OX8 is engineered to handle diverse voltage requirements, making it a versatile solution for industrial automation applications where electrical isolation between the controller and the load is required.Features
8 isolated N.O. (Normally Open) relay contact outputs.
Designed for seamless integration into the SLC 500 I/O chassis.
Provides electrical isolation between the PLC backplane and field devices.
Compatible with a wide range of AC and DC voltage applications.
Robust construction suitable for standard industrial environments.
ApplicationsThis module is commonly utilized in industrial control systems for switching high-current or high-voltage loads that require galvanic isolation from the PLC processor. Typical applications include machine control, process automation, and interface logic for motor control centers.Technical Specifications
Product Model
1746-OX8
Number of Outputs
8
Output Type
N.O. Relay Contact
Current per Output (120 VAC)
3 Amps
Current per Output (24 VDC)
1.2 Amps
Operating Temperature
0 to 60 degC (32 to 140 degF)
Operating Humidity
5 to 95% (non-condensing)
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical shock or damage to the backplane.
Slide the module into the designated slot in the SLC 500 chassis and secure it using the top and bottom retaining screws.
Use appropriate wire gauges for the terminal block connections to ensure secure contact and prevent overheating.
Maintain proper grounding practices for the chassis to minimize EMI interference.
Ensure the operating environment remains within the specified temperature and humidity ranges to maintain module longevity.
FAQWhat is the primary function of the 1746-OX8?The 1746-OX8 is an 8-point relay output module for the Allen-Bradley SLC 500 system, used to switch external field devices using isolated relay contacts.Can this module be used with both AC and DC loads?Yes, the 1746-OX8 is designed to support both AC and DC voltage loads, provided the current and voltage ratings specified in the technical documentation are not exceeded.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1746-OB16E is a high-performance isolated sourcing DC output module designed for the SLC 500 programmable logic controller system. This module provides reliable digital output control for industrial automation applications, featuring 8 points of isolated sourcing output. It is engineered to operate within a voltage range of 10-30 VDC, making it suitable for various field device interfaces requiring isolated switching.Features
8-point isolated sourcing DC output configuration.
Designed specifically for integration with the Allen-Bradley SLC 500 chassis.
Operating voltage range: 10-30 VDC.
Robust industrial design for reliable performance in demanding environments.
Compatible with standard SLC 500 I/O rack mounting.
ApplicationsThis module is typically utilized in manufacturing and process control environments where isolated DC output switching is required to drive actuators, relays, or solenoid valves. It is commonly found in packaging machinery, assembly lines, and material handling systems that rely on the SLC 500 platform.Technical Specifications
Product Model
1746-OB16E
Module Type
Isolated Sourcing DC Output
Number of Outputs
8 Points
Voltage Range
10-30 VDC
Manufacturer
Allen-Bradley
Weight
0.22 kg
Installation Guidelines
Ensure the SLC 500 system power is disconnected before installing or removing the module from the chassis.
Verify that the module is fully seated in the backplane slot and secured with the top and bottom retaining screws.
Use appropriate shielded cabling for output connections to minimize electromagnetic interference (EMI).
Ensure proper grounding of the chassis to a common earth ground to maintain signal integrity and safety.
Check that field wiring polarity matches the module terminal designations to prevent damage to the output circuitry.
FAQWhat is the primary function of the 1746-OB16E?The 1746-OB16E is an isolated sourcing DC output module for the SLC 500 system, used to control external DC-powered devices by switching them on or off based on PLC logic.Is this module compatible with all SLC 500 chassis?Yes, the 1746-OB16E is designed to fit into any standard SLC 500 I/O chassis slot.What does the term "isolated" mean for this module?Isolation refers to the electrical separation between the output channels and the backplane circuitry, which helps protect the PLC from voltage spikes or ground loops originating from the field devices.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1746-IH16 is a 16-point DC sinking input module designed for the SLC 500 programmable logic controller (PLC) platform. This module provides high-voltage DC input capabilities, specifically engineered for 125V DC applications. It is used to interface field devices such as sensors, switches, and pushbuttons with the SLC 500 backplane, facilitating reliable signal processing in industrial control systems.Features
16-point input density for space-efficient I/O configuration.
Current sinking input design compatible with 125V DC field signals.
Integrated status indicators for visual confirmation of input signal state.
Designed for seamless integration into standard SLC 500 chassis.
Low backplane power consumption to support high-density system configurations.
Technical Specifications
Product Model
1746-IH16
Input Points
16
Operating Voltage Range
90-146V DC
Input Type
Current Sinking
Backplane Current (5V DC)
85 mA
Signal Delay
9 ms
Off-State Current
0.8 mA
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical damage.
Verify the module is fully seated in the chassis slot and the locking tabs are engaged.
Use shielded cabling for input signals to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Maintain proper wire routing to separate signal-level wiring from high-voltage power lines.
Ensure the module is handled using proper ESD (Electrostatic Discharge) precautions to protect internal circuitry.
FAQWhat is the primary function of the 1746-IH16?The 1746-IH16 is a digital input module that converts 125V DC field signals into logic levels compatible with the SLC 500 processor, allowing the PLC to monitor the status of external devices.Is this module compatible with all SLC 500 chassis?Yes, the 1746-IH16 is designed to fit into any standard SLC 500 I/O chassis slot.What does current sinking mean for this module?In a sinking input configuration, the module provides the return path to common for the input circuit. The field device must be wired to source the current to the module input terminal.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1769-HSC is a high-speed counter module designed for the CompactLogix platform. This module is engineered to handle demanding motion and counting applications, providing precise feedback for high-speed pulse inputs. It supports two quadrature (A, B, Z) differential inputs capable of operating at frequencies up to 1 MHz, making it suitable for high-resolution encoder interfacing and rapid pulse counting tasks.Features
Two high-speed differential inputs (A, B, Z) supporting up to 1 MHz frequency.
Wide input voltage range of 2-30 VDC.
Integrated output capability with 4 physical outputs and 12 virtual outputs.
Output rating of 1 A per point at 5-30 VDC.
Designed for seamless integration with the 1769 CompactLogix I/O system.
ApplicationsThis module is commonly utilized in industrial automation environments for tasks such as high-speed position monitoring, flow measurement, motor speed control, and conveyor tracking where rapid pulse counting is required.Technical Specifications
Product Model
1769-HSC
Module Type
High-Speed Counter
Input Channels
2 Quadrature (A, B, Z) Differential
Max Input Frequency
1 MHz
Input Voltage Range
2-30 VDC
Physical Outputs
4
Virtual Outputs
12
Output Rating
1 A per point @ 5-30 VDC
Manufacturer
Allen-Bradley
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the 1769 I/O bus.
The 1769-HSC should be mounted on a DIN rail or panel-mounted according to standard CompactLogix installation procedures.
Use shielded twisted-pair cabling for high-speed input signals to minimize electromagnetic interference (EMI).
Maintain proper grounding practices to ensure signal integrity and protect against electrical noise.
Verify that the module is firmly seated in the I/O rack and that the bus connector is fully engaged.
FAQWhat is the primary function of the 1769-HSC?The 1769-HSC is a specialized I/O module used to count high-speed pulses from encoders or sensors, allowing the CompactLogix controller to track position or speed at rates that standard digital input modules cannot handle.Can this module be used with any CompactLogix controller?The 1769-HSC is designed for the 1769 CompactLogix I/O platform. Please verify your specific controller's compatibility and I/O capacity before installation.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1769-SDN is a DeviceNet Scanner module designed for use with the CompactLogix controller platform. This communication module acts as a bridge between the CompactLogix system and a DeviceNet network, allowing the controller to manage and exchange data with various DeviceNet-compliant field devices such as sensors, actuators, drives, and operator interfaces. It supports high-speed communication and provides efficient I/O data transfer, making it a critical component for distributed control architectures.Features
Provides a single DeviceNet channel for network communication.
Integrates directly into the CompactLogix 1769 I/O platform.
Supports standard DeviceNet baud rates (125, 250, and 500 kbps).
Equipped with a 5-pin male Phoenix connector for reliable network cabling.
Facilitates seamless integration of distributed I/O and intelligent field devices.
ApplicationsThe 1769-SDN is typically utilized in industrial automation environments requiring decentralized control. Common applications include material handling systems, packaging machinery, assembly lines, and process control systems where DeviceNet is the preferred fieldbus protocol for connecting remote I/O and motor control components to the main PLC.Technical Specifications
Product Model
1769-SDN
Module Type
DeviceNet Scanner
Platform
CompactLogix
Communication Channels
1
Connector Type
5-pin Male Phoenix
Manufacturer
Allen-Bradley
Installation Guidelines
Ensure the controller power is removed before installing or removing the module from the I/O bank.
Mount the module on a standard DIN rail or panel mount as specified by the CompactLogix system layout.
Use shielded twisted-pair cable for DeviceNet network connections to minimize EMI interference.
Ensure proper grounding of the DeviceNet network cable shield at the power supply or as per the network topology requirements.
Verify that the module is securely latched into the adjacent I/O module or controller to ensure proper backplane communication.
Handle with ESD precautions to prevent damage to internal electronic components.
FAQWhat is the primary function of the 1769-SDN?The 1769-SDN is a scanner module that enables a CompactLogix controller to act as a master on a DeviceNet network, allowing it to read and write data to remote DeviceNet slave devices.How is the module powered?The module receives its backplane power from the CompactLogix power supply, while the DeviceNet network itself requires a separate 24V DC power source connected via the network trunk line.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1769-ADN is a CompactLogix DeviceNet Adapter module designed to interface 1769 Compact I/O modules with a DeviceNet network. This adapter allows for the expansion of I/O capabilities, enabling a remote 1769 I/O rack to communicate with a DeviceNet master controller. It is a compact, high-performance solution for distributed control applications requiring reliable fieldbus connectivity.Features
Supports up to 30 Compact I/O modules per adapter.
Provides 180 words of input and 180 words of output data capacity.
Single-channel DeviceNet interface for seamless network integration.
Compact form factor suitable for space-constrained control cabinets.
Designed for robust performance in industrial environments.
Technical Specifications
Model
1769-ADN
DeviceNet Power Requirements
24V DC (+4%) at 90mA max (N.E.C. Class 2)
I/O Capacity
Up to 30 modules
Data Capacity
180 words Input / 180 words Output
Isolation Voltage
710V DC, 1 minute
Heat Dissipation
4.7W maximum
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the DIN rail or panel.
Mount the module in an environment that allows for adequate ventilation to manage heat dissipation.
Use shielded, twisted-pair cabling for DeviceNet connections to minimize electromagnetic interference (EMI).
Ensure proper grounding of the module chassis to a common ground point to maintain signal integrity.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to prevent internal component damage.
FAQIs the 1769-ADN still in production?No, the 1769-ADN has been discontinued by the manufacturer. We provide high-quality surplus or refurbished units to support legacy system maintenance.How many I/O modules can I connect to this adapter?The 1769-ADN supports a maximum of 30 Compact I/O modules in a single rack configuration.What is the power requirement for the DeviceNet interface?The module requires 24V DC (+4%) at 90mA maximum, adhering to N.E.C. Class 2 power standards.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1769-OF4 is a Compact I/O analog output module designed for use within the CompactLogix or MicroLogix 1500 controller systems. This module provides four single-ended analog output channels, capable of delivering either voltage or current signals to field devices such as actuators, valves, or variable frequency drives. It features 16-bit resolution, ensuring high-precision control for industrial automation applications.Features
Four isolated analog output channels
Selectable output ranges for voltage and current (0-20 mA)
High 16-bit resolution for accurate signal generation
Compact form factor for space-constrained control cabinets
Compatible with CompactLogix and MicroLogix 1500 platforms
Integrated screw terminal connections for secure field wiring
Technical Specifications
Product Model
1769-OF4
Number of Channels
4
Output Type
Voltage / Current (0-20 mA)
Resolution
16-bit
Conversion Rate
2.5 ms
Current Draw @ 5.1V
120 mA
Current Draw @ 24V
170 mA
Operating Voltage
24 VDC
Wire Size (Solid)
22 to 14 AWG
Wire Size (Stranded)
22 to 16 AWG
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the I/O bus.
Mount the module on a standard DIN rail or directly to a panel using the integrated mounting tabs.
Use copper conductors only for all field wiring to ensure proper electrical conductivity and compliance.
Maintain proper grounding practices to minimize electromagnetic interference (EMI).
Ensure adequate ventilation in the control cabinet to prevent overheating during operation.
Verify that the wire gauge used is within the specified 22-14 AWG range for solid wire or 22-16 AWG for stranded wire.
FAQWhat is the primary function of the 1769-OF4 module?The 1769-OF4 is an analog output module used to convert digital data from a PLC processor into analog voltage or current signals to control external field devices.Can this module be used with both CompactLogix and MicroLogix systems?Yes, the 1769-OF4 is designed to be compatible with both the Allen-Bradley CompactLogix and MicroLogix 1500 controller series.What type of wiring is required for this module?The module requires copper wiring. Please ensure that solid wires are between 22 and 14 AWG, and stranded wires are between 22 and 16 AWG.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 2711P-K10C6D6 is a high-performance PanelView Plus 1000 operator terminal engineered for reliable human-machine interface (HMI) control in demanding industrial sectors such as power generation, mining, and petrochemical processing. This unit features a 10.4-inch color display and a dedicated keypad input interface, allowing operators to interact directly with controller data and monitor real-time process variables efficiently.Features
10.4-inch color display for clear visualization of process data and diagnostic information.
Dedicated keypad interface for robust input control in industrial environments.
Integrated support for legacy DH+ and DH-485 communication protocols.
128 MB of internal memory for runtime operations, alarm logging, and screen development.
PC memory card slot for efficient firmware updates and data management.
Field-replaceable backlight (2711P-RL10C) to extend operational lifespan.
ApplicationsThis HMI terminal is designed for integration into legacy Allen-Bradley control architectures. It is suitable for applications requiring point-to-point or multi-node networking, providing immediate diagnostic feedback and reliable input handling to reduce system downtime in critical automation environments.Technical Specifications
Brand
Allen-Bradley
Model
2711P-K10C6D6
Product Line
PanelView Plus 1000
Display Size
10.4 in.
Input Type
Keypad
Power Input
18-32 VDC
Memory
128 MB
Communication
DH+, DH-485
Operating Temperature
0-55 degC
Status
Discontinued / Obsolete
Installation Guidelines
Ensure the unit is mounted in a panel cutout that allows for adequate ventilation and access to the rear communication ports.
Verify that the power supply is within the 18-32 VDC range and properly fused before connection.
Use shielded cables (e.g., 1770-CD or 1761-CBL-ASO3) for DH+ and DH-485 communication to minimize EMI interference.
Power down the system before inserting or removing memory cards or performing maintenance on the backlight assembly.
Maintain proper grounding practices to protect the terminal from electrical surges and noise.
FAQIs the backlight on this unit replaceable?Yes, the 2711P-K10C6D6 utilizes a field-replaceable backlight, part number 2711P-RL10C, which supports maintenance across various hardware revisions.What communication protocols does this HMI support?This model is specifically designed for legacy network support, featuring integrated DH+ and DH-485 communication ports for direct controller connectivity.Is this unit still in production?No, the 2711P-K10C6D6 is classified as a discontinued or obsolete product by the manufacturer. We provide these units as reliable replacements for existing legacy systems.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley SP-148540/148539 is a node adapter circuit board assembly designed for use with 1935 series digital DC drives. This component serves as a critical renewal part for maintaining industrial drive system communications and control logic. It is functionally equivalent to the 1395-148540 assembly.Features
Designed for integration with 1935 digital DC drive systems.
Functions as a node adapter board for reliable network communication.
Renewal part engineered to meet original equipment specifications.
Robust construction suitable for standard industrial environments.
Technical Specifications
Product Model
SP-148540/148539
Spare Model
129736-05
Power Supply
5V DC
Power Consumption
5-15 W
Isolation
500-1500V AC
Operating Temperature
0 degC to +60 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% RH (non-condensing)
Installation Guidelines
Ensure power is completely disconnected from the drive unit before attempting to remove or install the circuit board.
Handle the board by its edges to prevent electrostatic discharge (ESD) damage to sensitive components.
Verify that the board is correctly seated in the designated slot and that all edge connectors are properly aligned.
Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature component failure.
Check that all ribbon cables and wiring connections are secure and free from debris or oxidation.
FAQIs this board compatible with other drive series?This specific node adapter is designed for the 1935 digital DC drive series. Please verify your drive model and part number compatibility before installation.What should I do if the board shows signs of oxidation?Ensure the installation environment is kept within the specified non-condensing humidity range. If oxidation is present on the connectors, use an approved electronic contact cleaner and ensure the board is completely dry before re-insertion.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1756-AMXN is a communication bridge module for the ControlLogix platform, specifically engineered to facilitate the integration of legacy Reliance Electric AutoMax Distributed Power Systems (DCS) and Allen-Bradley Remote I/O (RIO) networks into modern control architectures. This module allows for a phased migration strategy, enabling users to upgrade to ControlLogix controllers while maintaining existing field networks and drive racks.Features
Integrated 100 MHz IDT MIPS processor for high-speed protocol conversion.
Supports three distinct operating modes: DCS Master, DCS Slave, and RIO Master.
Hardware-level support for up to 55 AutoMax DCS slave nodes in Master mode.
Dedicated 1 MB logic RAM and 512 KB shared backplane RAM for efficient data handling.
Facilitates legacy block transfers and discrete I/O polling for RIO networks.
Designed for seamless insertion into standard ControlLogix chassis backplanes.
ApplicationsThis module is primarily used in industrial automation environments where legacy Reliance Electric AutoMax or older Allen-Bradley RIO systems are still in operation. It is ideal for retrofitting drive systems, power distribution control, and legacy I/O networks into modern ControlLogix-based automation environments without requiring a complete system overhaul.Technical Specifications
Brand
Allen-Bradley
Product Line
ControlLogix
Module Type
AutoMax DCS / RIO Communication Interface
Processor
100 MHz IDT MIPS
Logic RAM
1 MB
Shared Backplane RAM
512 KB
Backplane Current (5.1V DC)
650 mA
Backplane Current (24V DC)
75 mA
Power Dissipation
5 Watts
Communication Port
DB9 D-shell
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the 1756-AMXN module.
Handle the module using ESD-safe practices to prevent damage to internal circuitry.
Verify that the module is fully seated in the chassis slot and that the locking mechanism is engaged.
Ensure that the communication cable connected to the DB9 port is properly shielded and routed away from high-voltage or high-EMI sources to maintain signal integrity.
Configure the module operating mode (DCS Master, DCS Slave, or RIO Master) via the appropriate software configuration tool before commissioning.
FAQWhat is the primary function of the 1756-AMXN?The 1756-AMXN acts as a bridge between the ControlLogix backplane and legacy AutoMax DCS or Remote I/O networks, allowing for the integration of older hardware into modern control systems.Can this module communicate with both AutoMax and RIO networks?Yes, the module is designed to support both AutoMax DCS protocols and Allen-Bradley Remote I/O (RIO) protocols, depending on the configured operating mode.How many nodes can be supported in DCS Master mode?In DCS Master mode, the module can coordinate high-speed deterministic messaging for up to 55 AutoMax DCS slave nodes.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 2711P-K12C15A1 is a high-performance PanelView Plus 1250 operator interface terminal designed for robust visual monitoring and real-time control in demanding industrial environments. Featuring a 12.1-inch active-matrix color TFT display and a tactile keypad, this unit provides reliable interaction for complex machinery in sectors such as power generation, chemical processing, and mining. The terminal utilizes the ControlNet communication protocol to ensure deterministic data exchange and seamless integration with Allen-Bradley programmable automation controllers.Features
12.1-inch full-color TFT display for clear process visualization.
Tactile keypad interface for reliable input in industrial settings.
Integrated ControlNet communication port for high-speed, deterministic network connectivity.
Internal 85-264 VAC power supply for versatile installation.
64 MB system memory for efficient runtime variable handling and alarm logging.
Ruggedized enclosure designed for panel mounting in harsh environments.
ApplicationsThis operator terminal is engineered for use in distributed control systems where high-speed, deterministic communication is required. It is suitable for monitoring and controlling automated processes in manufacturing, water treatment, and heavy industrial plants.Technical Specifications
Brand
Allen-Bradley
Model
2711P-K12C15A1
Product Line
PanelView Plus 1250
Display Size
12.1 in.
Display Type
Full Color TFT
Input Type
Keypad
Input Power
85-264 VAC
Memory
64 MB
Communication
ControlNet
Operating Temperature
0-55 deg C
Installation Guidelines
Ensure the panel cutout is prepared according to the manufacturer's specifications to maintain the integrity of the enclosure seal.
Use appropriate mounting hardware to secure the terminal to the enclosure door, ensuring the gasket is correctly seated to prevent ingress of dust or moisture.
Verify that the power supply voltage is within the 85-264 VAC range before connecting to the terminal.
Maintain adequate clearance around the unit to allow for proper heat dissipation and airflow.
Follow standard ESD precautions when handling the terminal to prevent damage to internal logic components.
Ensure the ControlNet cable is routed away from high-voltage power lines to minimize electromagnetic interference.
FAQIs the 2711P-K12C15A1 still in production?No, this model is classified as discontinued/obsolete. It is typically sourced as a spare part for existing legacy systems.What type of communication does this HMI support?This specific model is equipped with a ControlNet communication interface for deterministic fieldbus data exchange.What is the required power source for this terminal?The unit operates on an AC power supply ranging from 85 to 264 VAC.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The 2711P-B12C4D8 is a high-performance Human-Machine Interface (HMI) terminal from the Allen-Bradley PanelView Plus 6 1250 series. It is designed to provide robust visualization and control for industrial automation environments, facilitating seamless data exchange with various controller platforms including ControlLogix, CompactLogix, SLC 500, and PLC-5 systems. This terminal is engineered for demanding applications requiring reliable operator interaction, such as material handling, pharmaceutical processing, and automotive manufacturing.Features
12.1-inch color active matrix TFT display with 800 x 600 SVGA resolution and 18-bit color depth.
Dual input interface featuring an 8-wire analog resistive touchscreen and a comprehensive stainless steel keypad with F1-F20 and K1-K20 function keys.
Integrated communication ports including Ethernet (RJ45), RS-232, and two USB host ports for peripheral connectivity.
Expandable storage capacity via hot-swappable Secure Digital (SD) card slots for application files and firmware backups.
Field-replaceable LED backlight rated for 50,000 hours of service life.
ApplicationsThis operator terminal is suitable for centralized machine control and real-time process monitoring in industrial facilities. It is commonly deployed in systems requiring deterministic communication and high-visibility interfaces to reduce operational downtime and improve plant floor efficiency.Technical Specifications
Model
2711P-B12C4D8
Display Size
12.1-inch
Resolution
800 x 600 SVGA
Input Voltage
18 to 32 VDC
Power Consumption
70 W max (2.9 A at 24 VDC)
RAM
512 MB
Non-volatile Memory
512 MB (79 MB free)
Operating Temperature
0 to 55 deg C
Storage Temperature
-25 to 70 deg C
Backlight Life
50,000 hours
Installation Guidelines
Ensure adequate ventilation around the unit to maintain operating temperatures within the specified 0 to 55 deg C range.
Mount the terminal in an enclosure rated for the required environmental protection (e.g., NEMA/IP rating).
Use shielded communication cables and ensure proper grounding to minimize EMI interference.
Power down the system before installing or removing communication modules or SD cards.
Verify that the input voltage remains within the 18 to 32 VDC range to prevent damage to internal circuitry.
FAQWhat is the primary function of the 2711P-B12C4D8?This unit serves as an HMI terminal for monitoring and controlling industrial processes, acting as an interface between the operator and PLC systems like ControlLogix or SLC 500.Can the memory be expanded?Yes, the unit supports hot-swappable Secure Digital (SD) cards for expanded storage of applications and firmware.What type of input does this terminal support?It supports dual input modes: an 8-wire analog resistive touchscreen and a physical stainless steel keypad with dedicated function and navigation keys.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 5069-L380ERM is a high-performance CompactLogix 5380 Programmable Automation Controller (PAC) designed for demanding industrial applications requiring integrated motion control. Part of the Logix 5000 family, this controller provides 8 MB of user memory and supports high-speed processing for complex automation tasks.Features
Integrated Motion over EtherNet/IP for up to 28-32 axes of motion.
Dual 1 Gb Ethernet ports for high-speed network communication.
Dedicated USB port for local configuration and programming.
Supports up to 31 local Compact 5000 I/O modules.
High-speed task execution with up to 31 standard tasks and 1 safety task.
Supports up to 150 EtherNet/IP nodes.
Applications
Robotics and CNC machinery requiring multi-axis synchronization.
High-speed packaging and assembly line automation.
Material handling and complex conveyor systems.
Process automation and SCADA integration in smart manufacturing.
Technical Specifications
Model
5069-L380ERM
Memory
8 MB
Communication
2 x 1 Gb Ethernet, 1 x USB
Max Local I/O
31 Modules
Max EtherNet/IP Nodes
150
Motion Axes
Up to 28-32 axes
Power Supply
MOD Power 18-32V DC; SA Power 0-32V DC / 0-240V AC
Mounting
DIN-Rail
Installation Guidelines
Mount the controller horizontally on a zinc-plated steel DIN rail to ensure proper chassis grounding.
The controller must be positioned as the leftmost component in the system assembly.
Install a 5069-ECR end cap on the right side of the final I/O module to protect the bus connections before applying power.
Ensure the system is powered down before installing or removing any modules to prevent electrical damage.
Maintain adequate clearance around the controller to ensure proper ventilation and cooling.
FAQWhat is the 5069-L380ERM?It is a CompactLogix 5380 controller designed for general-purpose automation and integrated motion control via EtherNet/IP.What type of I/O modules are compatible?This controller is compatible with the 5069 Compact 5000 I/O series, supporting up to 31 local modules.How is the controller configured?Configuration is performed via the Ethernet ports or the local USB port using Studio 5000 Logix Designer software.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
