Jelajahi rangkaian lengkap produk otomasi industri dari merek-merek ternama seperti ABB, Bently, Honeywell, GE, dan lainnya. IndustriaX Limited membantu produsen mendapatkan komponen langka dan sulit ditemukan di seluruh dunia dengan pengiriman cepat untuk meminimalkan waktu henti.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The HE693ADC409 is a high-precision Millivolt Input Module designed for seamless integration with PLC control systems. By enabling direct connection of millivolt-level signals—such as bridged strain gages and load cells—this module eliminates the requirement for external transducers or signal conditioners. Engineered for demanding industrial environments including process automation, weighing systems, and manufacturing, the unit performs high-speed analog-to-digital conversion with 14-bit resolution. The module features integrated digital filtering to maintain signal integrity in electrically noisy settings, significantly reducing instrumentation errors and preventing costly system downtime.Signal Processing and Hardware ConfigurationThe module operates through four independent channels, each capable of configurable input ranges at +/- 25 mVdc, +/- 50 mVdc, or +/- 100 mVdc. Configuration is performed directly via software or a Hand-Held Programmer, allowing for rapid deployment. Internally, the device utilizes an integrating A/D converter to ensure high noise rejection. The architecture supports a wide common-mode range of +/- 12 Vdc, ensuring stability during differential signal measurement. Connectivity is managed through a field-removable 20-pin terminal strip, which simplifies maintenance and ensures rapid module replacement without the need to disconnect permanent field wiring.Features
Four independent, software-configurable input channels.
High-resolution 14-bit analog-to-digital conversion.
Integrated digital filtering for superior noise rejection in industrial environments.
Direct interface for low-level sensors like load cells and strain gages.
Field-removable terminal block for efficient maintenance and wiring management.
Technical Specifications
Model
HE693ADC409
Channels
4
Input Ranges
+/- 25 mVdc, +/- 50 mVdc, +/- 100 mVdc
Resolution
3 microV, 6 microV, 9 microV (selectable)
A/D Conversion
Integrating
Update Rate
35 channels per second
Input Impedance
> 20 Mohms
Max Safe Overload
+/- 35 Vdc
Common Mode Range
+/- 12 Vdc
Operating Temperature
0 to 60 degC
Power Consumption
100 mA at 5 Vdc
Relative Humidity
5% to 95% non-condensing
Installation Guidelines
Ensure the PLC rack power is disconnected before inserting or removing the module.
Use shielded twisted-pair cabling for all millivolt signal inputs to minimize electromagnetic interference.
Ground the cable shields at the source end to prevent ground loops.
Verify that the terminal block is securely seated and locked into the module housing.
Maintain proper ventilation within the enclosure to ensure the module operates within the 0 to 60 degC temperature range.
Avoid routing signal cables in parallel with high-voltage AC power lines.
FAQWhat type of sensors can be connected to the HE693ADC409?This module is specifically designed for low-level millivolt signals, making it ideal for direct connection to strain gages, load cells, and other bridge-type transducers without the need for external signal conditioning.How is the module configured?The module is configured via software or a compatible Hand-Held Programmer, allowing for easy selection of input ranges and operational parameters.Does the module require external power?The module draws its operating power directly from the PLC backplane (100 mA at 5 Vdc).
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Siemens 6ES5 254-4UA11 is a high-performance central processing unit and control board engineered for the legacy Simatic S5 automation tier. This processing node executes complex instruction subroutines, arithmetic evaluations, and closed-loop process control algorithms directly at the hardware layer. It is deployed within mission-critical industrial infrastructures, including petrochemical refineries, municipal thermal power stations, and deep-well mining operations. By serving as the core computational coordinator for local and distributed I/O sub-systems, this control board ensures deterministic cycle times and real-time fault interception, preventing system dropouts and reducing plant downtime.Architectural Layout and Processing LogicThe hardware configuration utilizes an optimized internal bus structure to achieve high-speed data throughput between the microcontrollers, onboard working memory, and external interface ports. This control board features dedicated system registers that monitor backplane line integrity and external power fluctuations. Built-in serial communication channels allow seamless interfacing with local programming equipment or supervisory control networks. The underlying physical architecture incorporates a multi-layer printed circuit board designed to dissipate heat efficiently via natural convection, alongside protective filtering stages that suppress high-frequency electromagnetic interference typically found inside heavy industrial motor control centers.Features
High-speed instruction execution for real-time process control.
Integrated diagnostic registers for backplane and power monitoring.
Expandable onboard working memory for complex automation tasks.
Robust multi-layer PCB design for EMI suppression in industrial environments.
Deterministic cycle times for reliable I/O coordination.
Technical Specifications
Model
6ES5 254-4UA11
Series
Simatic S5
Instruction Execution Time
0.18 microseconds (min)
Onboard Work Memory
64 KB (expandable)
Current Consumption
1.8 A at 5 VDC
Operating Temperature
0 to 55 deg C
Storage Temperature
-40 to 70 deg C
Relative Humidity
95% non-condensing
Installation Guidelines
Ensure the rack power supply is disconnected before inserting or removing the CPU module to prevent electrical arcing or component damage.
Verify that the module is correctly seated in the designated Simatic S5 backplane slot and that all locking mechanisms are engaged.
Maintain adequate clearance around the module to allow for natural convection cooling; avoid blocking airflow in the cabinet.
Use shielded communication cables for serial interfaces to maintain signal integrity in high-EMI environments.
Handle the module using proper ESD (Electrostatic Discharge) precautions to prevent damage to sensitive internal circuitry.
FAQIs this module compatible with all Simatic S5 racks?The 6ES5 254-4UA11 is designed for specific Simatic S5 configurations. Please verify your backplane and power supply compatibility against the technical documentation for your specific S5 system revision before installation.What is the primary function of this board?This is a central processing unit (CPU) that manages logic execution, arithmetic operations, and I/O communication within the Simatic S5 automation system.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Bently Nevada 3300/12 Power Supply Module is a critical component designed for the 3300 Monitoring System. It provides regulated, stable DC power to all monitoring modules installed within the rack, ensuring consistent performance for vibration, thrust, eccentricity, expansion, tachometer, and temperature monitoring applications. This module is engineered for high-reliability industrial environments where stable power distribution is essential for system integrity.Features
Provides regulated DC power distribution across the entire 3300 rack system.
Integrated power status monitoring with an OK relay output for diagnostic feedback.
Designed for seamless integration into standard 3300 rack chassis.
High-voltage AC input configuration (220/240 VAC) for versatile power compatibility.
Supports a total rack capacity of approximately 150 W.
Ordering Information
Model Code
Description
3300/12
Power Supply Module
01
Standard Agency Approval
20
High-Voltage AC Input (220/240 VAC)
01
Standard Barrier Configuration
Technical Specifications
Model
3300/12-01-20-01
Brand
Bently Nevada
Series
3300
Input Voltage
220/240 VAC
Power Capacity
Approx. 150 W
Operating Temperature
0 to 60 degC
Installation Guidelines
Ensure the 3300 rack is powered down before inserting or removing the power supply module to prevent electrical damage.
Verify that the input voltage matches the module configuration (220/240 VAC) before applying power.
Ensure proper seating in the rack slot to maintain reliable electrical contact with the backplane.
Maintain adequate ventilation around the rack to support the operating temperature range of 0 to 60 degC.
Follow standard ESD precautions when handling the module to protect internal circuitry.
FAQWhat is the primary function of the 3300/12 module?The 3300/12 serves as the primary power supply for the Bently Nevada 3300 system, converting AC input into regulated DC power for all installed monitoring modules.Does this module provide status feedback?Yes, the module includes an OK relay that monitors the power status of the rack, allowing for remote indication of power health.Can this module be used in any 3300 rack?This module is designed for the 3300 series rack. Please ensure your rack configuration supports the 220/240 VAC input requirement specified by the -20 suffix.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe 6ES5 430-4UA11 is a high-density digital input module engineered for the Siemens Simatic S5-135/155 PLC architecture. This module is designed to process 32 floating binary signals, converting external field status data from devices such as limit switches, pushbuttons, and proximity sensors into galvanically isolated internal logic levels. It is built for reliable signal acquisition in demanding industrial environments, including oil refineries, steel manufacturing, and water treatment facilities. By isolating the central processing unit from high-voltage transients, electrical noise, and ground loops, the module helps maintain system determinism and reduces unscheduled downtime.Features
32 floating digital input channels for high-density signal processing.
Galvanic optical isolation between field inputs and the backplane bus to protect sensitive CPU components.
Integrated RC filtering to mitigate mechanical contact bounce and electromagnetic interference.
Front-panel LED indicators for real-time channel status monitoring and diagnostics.
Industrial-grade PCB construction (C79040-A92-C316-05-85) for thermal stability.
ApplicationsThis module is intended for use in Simatic S5-135 and S5-155 PLC systems. It is suitable for monitoring large-scale digital I/O arrays in automated manufacturing, process control, and infrastructure management where electrical isolation and noise immunity are critical.Technical Specifications
Model
6ES5 430-4UA11
Product Family
Simatic S5-135 / S5-155
Input Type
32 Floating Digital Inputs
Nominal Input Voltage
24 VDC (15 to 30 VDC range)
Power Consumption
1.5 W (backplane), 8.5 mA per channel
Isolation
Galvanic Optical
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
PCB Assembly
C79040-A92-C316-05-85
Installation Guidelines
Ensure the PLC rack power is disconnected before installing or removing the module.
Handle the module by the edges to prevent ESD damage to the internal circuitry.
Ensure the module is fully seated in the S5 backplane slot and secured with the front-panel locking mechanism.
Use shielded cabling for field inputs to minimize EMI pickup, especially in high-noise environments.
Verify that input voltage levels remain within the specified 15-30 VDC range to prevent signal errors or hardware damage.
Maintain adequate ventilation in the cabinet to ensure the ambient temperature remains within the 0-60 deg C operating range.
FAQIs this module compatible with S5-115U systems?No, this module is specifically designed for the S5-135 and S5-155 PLC architectures. Please verify your system model before installation.Does this module require external power for the inputs?Yes, the inputs are floating and require an external 24 VDC supply to provide the signal voltage for the connected field devices.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 2711-K5A5 is a compact HMI operator terminal belonging to the PanelView 550 Standard series. Engineered for real-time process monitoring and machine control, this terminal integrates with various controller platforms, including Allen-Bradley PLC-5, SLC 500, CompactLogix, MicroLogix, and ControlLogix systems. Its small form factor and robust performance make it suitable for localized control stations in discrete manufacturing and small-scale automation environments.Features
5.5-inch blue-mode monochrome LCD display with 256 x 128 pixel resolution.
Keypad interface featuring 10 configurable function keys (F1-F10) for precise command execution.
Integrated RS-232 serial communication port supporting the DH-485 protocol.
Field-replaceable LED backlight for extended operational lifespan.
Supports up to 16 user-generated passwords per application for enhanced security.
ApplicationsThis terminal is designed for industrial environments requiring reliable operator-to-machine interaction. Typical applications include machine status monitoring, alarm management, and setpoint adjustment in small-to-medium scale automation systems.Technical Specifications
Model
2711-K5A5
Display Type
Monochrome Transflective LCD
Display Size
5.5 inches
Resolution
256 x 128 pixels
Input Voltage
85 to 264 VAC
Input Frequency
47 to 63 Hz
Communication
RS-232 (DH-485)
Memory
170 KB runtime; 240 KB non-volatile
Enclosure Rating
NEMA 12/13, 4X (Indoor), IP54, IP65
Operating Temperature
0 to 55 degC
Installation Guidelines
Ensure the unit is flush-mounted in a suitable enclosure to maintain NEMA/IP ratings.
Verify that the power supply voltage matches the 85-264 VAC input range before connection.
Maintain adequate clearance around the unit to ensure proper ventilation and prevent overheating.
Use shielded communication cables for RS-232 connections to minimize EMI interference.
Power down the unit before performing any maintenance or replacing the backlight assembly.
FAQWhat controllers are compatible with the 2711-K5A5?The terminal is compatible with Allen-Bradley PLC-5, SLC 500, CompactLogix, MicroLogix, and ControlLogix systems via the DH-485 protocol.Can the backlight be replaced in the field?Yes, the 2711-K5A5 is designed with a field-replaceable LED backlight to ensure long-term operational availability.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Emerson HD11010-3A is a high-frequency switching rectifier module engineered for reliable DC power supply in critical industrial infrastructure. Designed for high power density and efficiency, this module is widely utilized in DC power screens, charging systems, and power distribution applications within substations, hydropower plants, and manufacturing facilities.Features
High-frequency switching technology for improved efficiency and compatibility.
Wide AC input voltage range (85-300V AC) providing strong adaptability to varying grid conditions.
Step-less current limiting for high-precision battery charging.
Built-in CPU for distributed control and enhanced anti-interference capability.
Integrated protection and warning mechanisms supporting remote monitoring functions.
Robust design suitable for harsh industrial environments with high reliability.
Applications
Power distribution rooms and DC power screens.
Substation and power plant control systems.
Industrial automation and robotic assembly lines.
Chemical and process plant instrumentation power.
Critical infrastructure requiring continuous, stable DC power.
Technical Specifications
Model
HD11010-3A
Input Voltage
85-300V AC
Output Voltage
24V DC (Nominal)
Output Current
10A
Output Power
480-600W
Efficiency
>90% typical
Operating Temperature
-40 degC to +75 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% RH non-condensing
Installation Guidelines
Ensure the power cabinet slot is compatible with the module and free of debris.
Inspect the module for physical damage and verify that rear connector pins are straight before insertion.
Align the module with the shelf guide rails and slide it firmly into the slot until the rear connector is fully seated.
Tighten all front-panel captive screws to secure the module and ensure proper electrical grounding.
Always power down the cabinet before inserting or removing the module to prevent electrical arcing.
FAQWhat is the primary use of the HD11010-3A?The HD11010-3A is a high-frequency switching rectifier module used primarily for charging DC screens in power, utility, and telecommunication systems.Is this module suitable for extreme temperatures?Yes, it is designed for industrial use with an operating temperature range of -40 degC to +75 degC, making it suitable for demanding environments.Does this module support remote monitoring?Yes, the module features built-in CPU control and provides comprehensive protection and warning measures that support remote monitoring functions.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Bently Nevada 86497-01-02-02-00 is an interface module designed for industrial monitoring and control systems. This module facilitates reliable signal processing and interconnection within the Bently Nevada architecture, ensuring robust performance in demanding environments.Features
Input voltage range: 20-34 VDC
Integrated 2.5 Amp @ 250 V fuse for circuit protection
Configured with 6 groups of 8 points for high-density signal management
Designed for high reliability in harsh industrial conditions
Technical Specifications
Model
86497-01-02-02-00
Input Voltage
20-34 VDC
Fuse Rating
2.5 Amp @ 250 V
I/O Configuration
6 groups of 8 points
Operating Temperature
-40 degC to +70 degC
Storage Temperature
-50 degC to +85 degC
Humidity
0-95% RH (non-condensing)
Vibration Resistance
5g (10-500Hz)
Installation Guidelines
Ensure the system power is completely disconnected before installing or removing the module to prevent electrical damage.
Mount the module in a clean, dry, and vibration-controlled environment, adhering to standard industrial rack or panel mounting practices.
Verify that all wiring connections are secure and that the input voltage is within the specified 20-34 VDC range.
Maintain proper clearance around the module to allow for adequate airflow and heat dissipation.
Use shielded cabling for signal lines to minimize electromagnetic interference (EMI) in high-noise industrial environments.
FAQWhat is the primary function of the 86497-01-02-02-00?This unit serves as an interface module, providing signal distribution and protection for monitoring systems, featuring 6 groups of 8 points for organized connectivity.What are the power requirements for this module?The module operates on a DC input voltage range of 20-34 VDC and includes an integrated 2.5 Amp fuse rated for 250 V.Is this module suitable for extreme temperatures?Yes, the module is rated for operation in temperatures ranging from -40 degC to +70 degC, making it suitable for a wide variety of industrial field applications.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB PM573-ETH (1SAP130300R0271) is a high-performance processor module from the AC500 series, designed for demanding industrial automation and process control applications. This CPU provides 512 kB of user program memory and 512 kB of user data memory, ensuring robust capacity for complex control logic and real-time data processing.Features
Integrated Industrial Ethernet port for seamless network connectivity.
Two configurable serial interfaces (RS232/RS485) supporting Modbus RTU and ASCII protocols.
Integrated FBP (FieldBus Plug) interface for flexible fieldbus expansion.
Onboard LCD display with eight function keys and three LED status indicators for local diagnostics and run/stop control.
SD card slot for convenient program backup and data logging.
Supports expansion of up to 10 local I/O modules.
ApplicationsThe PM573-ETH is suitable for a wide range of industrial environments, including:
Manufacturing automation and packaging machinery.
Water and wastewater treatment (pump station control and filtration).
Material handling systems, including conveyors and ASRS.
HVAC and energy management systems.
Chemical and material processing loops.
Technical Specifications
Model
PM573-ETH
Order Code
1SAP130300R0271
Total Memory
1,024 kB
User Program Memory
512 kB
User Data Memory
512 kB
Rated Voltage
24 V DC
Supply Voltage Range
20.4 V to 28.8 V DC
Operating Temperature
0 degC to +60 degC
Storage Temperature
-40 degC to +70 degC
Protection Rating
IP20
Installation Guidelines
Mounting: Designed for standard DIN rail installation within a protected control cabinet.
Power Supply: Connect 24 V DC power to the designated UP/ZP terminals on the terminal base. Ensure voltage stays within the 20.4 V to 28.8 V DC range.
Grounding: Proper earthing of the terminal base is critical to mitigate electromagnetic interference (EMI).
Handling: Always power down the system before inserting or removing the module to prevent electrical damage.
Environment: Ensure adequate ventilation to maintain ambient temperatures within the specified operating range.
FAQWhat is the PM573-ETH?The ABB PM573-ETH is an AC500-series programmable logic controller (PLC) CPU featuring 512 kB of user program memory, an integrated Ethernet port, and two serial interfaces.What communication protocols does the PM573-ETH support?It supports protocols including Modbus TCP, EtherNet/IP, and PROFIBUS/CANopen (via optional expansion modules).How many simultaneous Modbus TCP client connections does it support?The PM573-ETH can handle up to 16 simultaneous Modbus TCP client connections, exposing up to 512 bytes of input and output data.
6 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB RINT-5611C (Part Number 68718929) is a Main Circuit Interface Board designed for use within the ABB ACS800 series variable frequency drives. It is specifically engineered for ACS800-01 and ACS800-04 units with an R6 frame size, operating on 380–500 VAC supply systems. This board serves as a critical interface between the drive's control electronics and the power section, facilitating signal processing, communication, status monitoring, and coordination of drive operations.Features
Serves as the primary interface for conditioning, isolating, and transmitting signals between the main power circuit and control/protection systems.
Provides robust galvanic isolation between high-power primary circuits and sensitive low-voltage electronics to ensure measurement accuracy and system safety.
Integral component for fault management and stable drive performance.
Compatible with ACS800 R6 frame configurations.
Applications
Mining and Metallurgy: Hoists, conveyor belts, crushers, and steel rolling machinery.
Petroleum and Chemicals: Drilling pumps, injection pumps, centrifuges, and large-scale fans.
Electric Power Industry: Coal feeders, induced draft fans, and circulating water pump systems.
Shipbuilding: Propulsion systems and deck machinery including winches and cranes.
Papermaking and Water Treatment: Multi-drive control systems and large-scale pumping stations.
Technical Specifications
Model
RINT-5611C (68718929)
Supply Voltage
24 VDC
Analog Input Accuracy
+/- 0.1% FS
Operating Temperature
-25 degC to +70 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% (non-condensing)
Vibration Rating
5-500 Hz
Tariff Code
8537101190
Installation Guidelines
Qualified Personnel: Only licensed electricians should perform installation and maintenance.
Power Isolation: Isolate all main and auxiliary power supplies. Perform proper Lock-Out/Tag-Out (LOTO) procedures.
Capacitor Discharge: Wait at least 5 minutes after shutting off input power to allow intermediate circuit capacitors to discharge.
Voltage Verification: Measure voltage between terminals UDC+ and UDC-, and across phases U1, V1, W1, to ensure the potential is near 0 V before handling components.
Maintenance Note: The replacement kit includes an internal cooling fan (PN: 63998931); this fan must be replaced simultaneously with the RINT board to ensure proper thermal management.
FAQWhat is the function of the RINT-5611C board?It acts as the main circuit interface board, primarily used in ABB ACS800 R6 frame drives to connect the control unit with the IGBT power stage.Is this product brand new?Yes, the ABB RINT-5611C is supplied as a new, original, and unused component.Do you provide a warranty?Yes, we provide a 12-month warranty for this component from the date of delivery.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB CI867AK01 (3BSE092689R1) is a high-performance Modbus TCP communication interface module designed for the ABB AC 800M control system family. This kit includes the CI867 communication module and the required TP867 mounting base for seamless integration into the controller rack.Features
Dual RJ45 Ethernet ports supporting 10/100 Mbps data rates.
Configurable as both Modbus TCP client (master) and server (slave).
Supports cyclic and acyclic data exchange for process variables.
Compatible with standard Modbus data types including coils, discrete inputs, and registers.
Supports 16-bit and 32-bit register access with configurable byte/word swapping.
Hot-swap capability allows for module replacement without requiring a system shutdown.
Integrates directly into the Control Builder M or Compact Control Builder engineering environment.
Applications
Oil and Gas: Integration of remote I/O and field devices on offshore platforms and refineries.
Power and Utilities: Data exchange with power meters and protection relays in water treatment and power plants.
Chemical and Petrochemical: Reliable communication bridge for third-party PLCs and variable frequency drives.
Manufacturing: Scalable connectivity for automated batch processing and high-availability systems.
Technical Specifications
Model
CI867AK01 (3BSE092689R1)
Manufacturer
ABB
Communication
Modbus TCP/IP
Ethernet Ports
2 x RJ45 (10/100 Mbps)
Operating Temperature
-25 degC to +70 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% RH (non-condensing)
Power Consumption
Typically 1.5 W
Isolation
1500 V AC galvanic
Protection Class
IP20
Installation Guidelines
Mount the TP867 baseplate onto a standard 35 mm top-hat DIN rail.
Slide the baseplate along the rail to engage the CEX-Bus side connector with the controller or adjacent module.
Align the CI867 module with the TP867 base and press firmly until the locking mechanism clicks.
Ensure proper grounding of the DIN rail to maintain EMI immunity.
Always power down the system before installing or removing modules if hot-swap procedures are not explicitly active in your specific configuration.
FAQWhat is the primary function of the CI867AK01?The CI867AK01 acts as a communication bridge, allowing the ABB AC 800M controller to exchange process data with third-party Modbus TCP-compatible devices such as VFDs, motor starters, and remote I/O stations.Does this module support redundancy?Yes, the CI867 supports redundant configurations, allowing for high-availability communication in critical industrial applications.Can this module be used as a master and a slave?Yes, the module is highly flexible and can be configured to act as a Modbus TCP client (master) to poll field devices or as a server (slave) to provide data to upper-level SCADA or DCS systems.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Schneider 140XCP40200 is a 19-inch rear rail mounting bracket engineered for the Modicon automation series. This component provides a stable and secure mounting interface for industrial control equipment within standard 19-inch rack enclosures, ensuring structural integrity and proper alignment of system components in demanding industrial environments.Features
Designed specifically for Modicon series industrial control systems.
Standard 19-inch width for compatibility with industrial rack infrastructure.
Constructed from durable steel for long-term mechanical support.
Rear rail mounting configuration for efficient cabinet space utilization.
Operating temperature range suitable for harsh industrial conditions (-20 degC to 70 degC).
Technical Specifications
Model
140XCP40200
Product Type
19-inch Rear Rail Mounting Bracket
Manufacturer
Schneider Electric
Product Line
Modicon
Material
Steel
Mounting Type
Rear rail
Operating Temperature
-20 degC to 70 degC
Installation Guidelines
Ensure the 19-inch rack rails are properly grounded before installing the bracket to maintain system-wide electrical safety.
Verify that the mounting surface is clean and free of debris to ensure a flush fit.
Use appropriate hardware to secure the bracket to the rear rails, ensuring all fasteners are tightened to the torque specifications required by the enclosure manufacturer.
When mounting heavy automation modules, ensure the weight is evenly distributed across the bracket to prevent mechanical stress.
Maintain adequate clearance around the mounted components to allow for proper airflow and cooling within the cabinet.
FAQWhat is the primary function of the 140XCP40200?The 140XCP40200 is a mounting bracket used to secure Modicon automation components to the rear rails of a standard 19-inch industrial rack.Is this bracket compatible with non-Modicon systems?This bracket is specifically designed for the Schneider Electric Modicon series. While it fits standard 19-inch rails, compatibility with other brands or systems is not guaranteed and should be verified against the specific equipment mounting requirements.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Honeywell RM7823A1016 is a microprocessor-based flame safeguard relay module designed for industrial burner management systems. It provides critical flame signal processing and relay output control for boilers, furnaces, process heaters, and combustion control skids. By continuously evaluating flame sensor inputs, the module ensures safe burner operation and initiates immediate shutdown in the event of flame failure.Features
Microprocessor-based flame verification engine for high-reliability signal processing.
Compatible with UV and IR flame sensors for versatile burner monitoring.
Deterministic relay output architecture for safe fuel valve and ignition interlock control.
Integrated timing-based discrimination logic to mitigate false flame detection from electrical noise or transient light.
Fail-safe design ensures transition to a lockout state upon detection of internal faults or loss of flame signal.
Standard RM7800 series plug-in architecture for simplified installation and maintenance.
ApplicationsThis module is intended for use in high-risk thermal environments, including power generation plants, oil refineries, and chemical processing facilities. It serves as a core component within the Honeywell RM7800 series burner management architecture to maintain safety standards in combustion control loops.Technical Specifications
Model
RM7823A1016
Brand
Honeywell
Product Type
Flame Detector Relay Module
Operating Temperature
0 to 60 deg C
Processing
Microprocessor-based signal verification
Mounting
Plug-in base module
Safety Function
Flame failure detection, lockout control, automatic shutdown
Installation Guidelines
Ensure the burner management system is fully powered down before inserting or removing the module from the base.
Verify that the module is securely seated in the RM7800 series base to ensure proper backplane contact.
Maintain proper grounding of the burner control cabinet to minimize electromagnetic interference (EMI) on flame sensor signal lines.
Route flame sensor signal cables separately from high-voltage power lines to prevent signal corruption.
Ensure the installation environment remains within the specified temperature range of 0 to 60 deg C to prevent thermal degradation of internal components.
FAQWhat is the primary function of the RM7823A1016?The RM7823A1016 acts as a flame safeguard relay that monitors flame presence via connected sensors and controls burner safety interlocks, such as fuel valves and ignition systems, to prevent hazardous operation.Is this module compatible with existing RM7800 series systems?Yes, the RM7823A1016 is designed for the Honeywell RM7800 series burner management platform and utilizes standard plug-in base mounting for easy integration or replacement.What happens if the module detects a flame failure?The module executes internal safety logic to trigger an immediate shutdown and enters a lockout state, which requires a manual reset to restore operation.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe GE Fanuc QPJ-2D100-L2P is a 4.7-inch monochrome touch screen interface from the QuickPanel Jr. series. This HMI module functions as an operator control station for industrial automation, providing real-time monitoring and parameter adjustment capabilities. Its compact design and high-resolution display make it suitable for space-constrained environments such as water treatment, food processing, and small-scale manufacturing machinery.Features
4.7-inch monochrome LCD display with 240 x 320 pixel resolution.
Rugged housing rated for NEMA 4X/12 and IP65 protection against moisture and contaminants.
Compatible with QuickDesigner Version 3.7 software for application development.
Integrated tactile interface for rapid diagnostic feedback and process control.
Designed for reliable operation in distributed automation architectures.
ApplicationsThis unit is designed for local machine-side control, operator interface panels, and distributed I/O monitoring. It is frequently deployed in environments requiring localized troubleshooting and real-time process visibility.Technical Specifications
Model
QPJ-2D100-L2P
Display Type
4.7 inch Monochrome LCD
Resolution
240 x 320 pixels
Input Voltage
24 VDC (20.4 to 27.6 VDC)
Power Consumption
12 W
Operating Temperature
0 to 50 degC
Relative Humidity
5 to 85 percent (non-condensing)
Ingress Protection
IP65 / NEMA 4X/12
Installation Guidelines
Ensure the panel cutout is prepared according to the manufacturer's specifications to maintain the integrity of the NEMA 4X/12 seal.
Verify that the power supply provides a stable 24 VDC within the 20.4 to 27.6 VDC range before connection.
Maintain proper ventilation in the enclosure to keep the ambient temperature within the 0 to 50 degC operating range.
Use shielded communication cables and route them away from high-voltage or high-EMI sources to prevent signal interference.
Always disconnect power before installing or removing the unit to prevent electrical damage.
FAQWhat software is required to program this HMI?The QPJ-2D100-L2P is designed to be used with the QuickDesigner Version 3.7 software suite.What is the power tolerance of this unit?The unit operates on 24 VDC and is engineered to withstand power interruptions of up to 20 milliseconds without loss of operation.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The 1756-PA75 is a standard AC power supply module designed for the Allen-Bradley ControlLogix automation platform. It provides regulated DC power to the chassis backplane, ensuring reliable operation for all modules installed within the ControlLogix system.Features
75W total output power capacity
Wide input voltage range: 85-265V AC (47-63 Hz)
Supports nominal 120V/240V AC input
Provides multiple DC outputs: 1.2V, 3.3V, 5.1V, and 24V DC
Integrated electronic crowbar circuit for over/under voltage and current protection
Convection cooling design
Applications
Automotive manufacturing assembly lines
Oil and gas pipeline control and pump station monitoring
Food and beverage automated packaging and filling systems
Water treatment and power generation logic control
Technical Specifications
Model
1756-PA75
Input Voltage
85-265V AC (Nominal 120/240V AC)
Input Frequency
47-63 Hz
Max Output Power
75W (at 0 to 60 degC)
Output 1.2V DC
1.5A
Output 3.3V DC
4A
Output 5.1V DC
13A
Output 24V DC
2.8A
Operating Temp
0 to 60 degC (32 to 140 degF)
Storage Temp
-40 to 85 degC (-40 to 185 degF)
Isolation Voltage
250V (continuous)
Installation Guidelines
The 1756-PA75 must be installed in the dedicated power supply slot located at the far left side of the ControlLogix chassis.
Ensure the system is powered down before inserting or removing the module to prevent electrical arcing or damage to the backplane connectors.
The module is designed for convection cooling; ensure adequate clearance above and below the chassis for proper airflow.
Use a 15A time-delay type fuse in all ungrounded power connections for external overcurrent protection.
Ensure the module is used in Pollution Level 2 industrial environments and Category II applications as per IEC 60664-1.
FAQWhat is the 1756-PA75?The 1756-PA75 is a standard AC power supply module for the ControlLogix system, providing regulated DC power to the chassis backplane.What is the difference between 1756-PA75 and 1756-PB75?The 1756-PA75 is designed for AC input (85–264V AC), whereas the 1756-PB75 is designed for DC input (18–32V DC).Does the module require an external fuse?Yes, it is recommended to use a 15A time-delay type fuse in all ungrounded power connections for external overcurrent protection.What is the hold-up time during power interruption?The module provides a hold-up time of 2 cycles at 85V AC (60 Hz), 6 cycles at 120V AC (60 Hz), and 20 cycles at 220V AC (60 Hz).
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe 6AV3525-4EA01-0AX0-ZA03-SUB-LCD is a high-grade engineered replacement LCD flat panel module designed specifically for the Siemens Simatic OP25 human-machine interface (HMI). This display component restores graphic visualization capabilities on the factory floor, enabling operators to monitor and interact with real-time machine data. It is suitable for use in heavy industrial sectors, including water treatment, chemical processing, and automotive manufacturing, where maintaining clear operator visibility is critical for process control.Features
Direct replacement for the original Simatic OP25 HMI display assembly.
5.7-inch monochrome active matrix LCD panel.
Native resolution of 320 x 240 pixels for sharp text and vector graphics.
High-efficiency backlighting circuitry for consistent luminance in industrial environments.
Integrated flex-cable interface for seamless connection to existing legacy controller boards.
Passive installation design requires no custom firmware or structural modifications to the operator console.
ApplicationsThis replacement panel is intended for the maintenance and repair of legacy Siemens Simatic OP25 operator terminals. It is ideal for facilities looking to extend the service life of existing HMI hardware without the need for complete system migration or expensive console retrofits.Technical Specifications
Model
6AV3525-4EA01-0AX0-ZA03-SUB-LCD
Brand
Siemens
Target System
Simatic OP25 HMI
Display Size
5.7 inch
Resolution
320 x 240 Pixels
Display Type
Monochrome LCD
Power Consumption
2.5 W
Operating Temperature
0 to 50 deg C
Installation Guidelines
Ensure the HMI terminal is fully powered down and disconnected from the main power supply before attempting to open the chassis.
Use appropriate ESD (Electrostatic Discharge) protection when handling the display module to prevent damage to sensitive internal circuitry.
Carefully remove the legacy display assembly, noting the orientation of the flex-cable connection.
Install the replacement panel into the existing metal chassis, ensuring all mounting points are aligned and secured.
Connect the flex-cable interface to the controller board, ensuring the connector is fully seated and locked.
Verify the display operation upon power-up before closing the terminal enclosure.
FAQIs this a genuine Siemens factory part?This module is an engineered replacement component designed to be fully compatible with the Siemens Simatic OP25 HMI. It is designed to match the form, fit, and function of the original hardware to ensure seamless integration.Does this replacement require any software changes?No, this is a passive hardware replacement. The module is designed to interface with the existing controller drive boards without requiring firmware updates or configuration changes.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Bently Nevada 3300/05 Rack System serves as the foundational mechanical housing and backplane for the 3300 series monitoring system. Engineered for industrial reliability, this rack provides the necessary structural support, electrical backplane connectivity, and slot capacity required to integrate various vibration, thrust, and I/O monitoring modules. It is essential for protecting critical rotating machinery, including turbines, compressors, and pumps, by ensuring consistent module alignment and stable electrical communication across the monitoring architecture.Features
Robust mechanical housing designed for industrial protection environments.
Integrated backplane for reliable power distribution and signal communication between installed modules.
Supports a wide range of 3300 series monitoring and I/O cards.
Designed for standard panel mounting configurations.
Ensures mechanical stability and electrical continuity for high-availability monitoring.
Ordering Information
Model Code
Description
3300/05
Base Rack System
22
Rack Size Configuration
00
Standard Mounting Option
00
Standard Agency Approval
Technical Specifications
Model
3300/05-22-00-00
Brand
Bently Nevada
Series
3300
Product Type
Rack System
Operating Temperature
0 to 60 deg C
Power Supply Compatibility
Standard 3300 series power supplies
Installation Guidelines
Ensure the rack is mounted in a clean, dry, and vibration-dampened environment.
Verify that the mounting surface is rigid and capable of supporting the weight of the fully populated rack.
Use proper grounding techniques to connect the rack to the system common to minimize EMI/RFI interference.
Power down the system before inserting or removing any monitoring modules to prevent electrical damage.
Ensure adequate airflow around the rack to maintain operating temperatures within the specified 0 to 60 deg C range.
Follow standard ESD (Electrostatic Discharge) handling procedures when installing or servicing modules within the rack.
FAQWhat is the primary function of the 3300/05 rack?The 3300/05 rack acts as the central chassis for the Bently Nevada 3300 monitoring system, providing the physical slots, power distribution, and data backplane required for the operation of vibration and thrust monitoring modules.Is this rack compatible with all 3300 series modules?Yes, the 3300/05 is designed to house standard 3300 series monitoring and I/O modules, provided the specific rack size and power configuration requirements are met.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 2711-NL5 is a PanelView 600 series terminal designed for operator interface and control in industrial automation applications. This unit features a 5-inch backlit display and provides essential visualization capabilities for monitoring PLC and SLC controller data. As a legacy component, it is widely utilized for maintaining existing control systems and minimizing downtime in established manufacturing environments.Features
5-inch backlit display utilizing Cold Cathode Fluorescent Lamp (CCFL) technology.
Integrated communication ports including RS-232 (DH-485) and dedicated RS-232 printer support.
Robust enclosure design meeting NEMA Type 12, 13, 4X (indoor) and IEC IP54/IP65 standards for protection against dust and moisture.
Wide input power range of 18 to 32 VDC.
Compatible with a broad range of PanelView 600 series hardware revisions.
Technical Specifications
Manufacturer
Allen-Bradley
Product Line
PanelView 600
Part Number
2711-NL5
Input Power
18 to 32 VDC
Memory
240 KB
Communication
RS-232 (DH-485), RS-232 Printer
Operating Temperature
0 to 55 degC (32 to 131 degF)
Storage Temperature
-20 to 85 degC (-4 to 185 degF)
Enclosure Rating
NEMA 12, 13, 4X; IP54, IP65
Vibration Resistance
2 g at 2000 Hz
Installation Guidelines
Ensure the terminal is mounted in an enclosure that meets the specified NEMA/IP ratings to maintain environmental protection.
Verify that the power supply provides a stable 18-32 VDC input before connection.
Maintain proper clearance around the unit to allow for adequate ventilation and heat dissipation.
Use appropriate shielded communication cables (e.g., 2711-NC14) to minimize EMI interference in industrial environments.
Always disconnect power before performing any wiring, maintenance, or module replacement to prevent electrical damage.
FAQIs the 2711-NL5 still supported by the manufacturer?The 2711-NL5 is classified as a discontinued or obsolete product by Allen-Bradley. It is primarily sourced for the maintenance and repair of legacy systems.What type of backlight does this terminal use?This unit utilizes Cold Cathode Fluorescent Lamp (CCFL) technology for screen illumination.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The General Electric IC693CHS392C is a 10-slot expansion baseplate designed for the Series 90-30 PLC platform. This unit provides additional I/O capacity for industrial control systems, allowing for the integration of up to ten I/O or option modules. It features a dedicated slot for a power supply module and utilizes a 25-pin D-shell female connector for expansion communication.Features
10-slot capacity for versatile I/O and option module configuration.
Dedicated slot for system power supply.
Compatible with Series 90-30 PLC architecture.
Robust panel-mounting design for secure installation.
Internal power consumption of 150 mA at 5 VDC.
ApplicationsThis expansion base is typically utilized in GE Series 90-30 PLC systems where additional I/O density is required beyond the capacity of the main CPU rack. It is suitable for distributed control applications, machine automation, and process monitoring systems.Technical Specifications
Product Model
IC693CHS392C
Series
Series 90-30
Slot Count
10 Slots
Power Requirements
5 VDC
Current Consumption
150 mA
Expansion Interface
25-pin D-shell female connector
Mounting Type
Panel Mount
Weight
0.94 kg
Installation Guidelines
Ensure the installation environment is restricted to indoor use only, away from excessive moisture, dust, or corrosive gases.
Mount the baseplate securely to a flat, vibration-resistant panel surface.
Always disconnect all power sources before installing or removing modules from the baseplate to prevent electrical damage.
Ensure proper grounding of the baseplate chassis to the system common ground to minimize electromagnetic interference (EMI).
Verify that the 25-pin expansion cable is firmly seated and secured to ensure reliable communication between the CPU rack and the expansion base.
Maintain adequate clearance around the unit to allow for proper ventilation and heat dissipation.
FAQCan this baseplate hold a CPU module?No, the IC693CHS392C is an expansion baseplate and does not support CPU modules. It is designed specifically for I/O and option modules.What is the primary function of the 25-pin connector?The 25-pin D-shell female connector is used to link the expansion base to the main CPU rack or another expansion base in the system chain.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1336-PB-SP2B is a precharge printed circuit board designed for use within the 1336 series drive systems. This component is essential for managing the initial inrush current during the power-up sequence of the drive, protecting sensitive internal electronics from voltage spikes and surge currents.Features
Original Allen-Bradley component for 1336 series drives
Manages DC bus precharge sequence
Protects drive power components from high inrush current
Direct replacement for specified 1336 drive configurations
Technical Specifications
Manufacturer
Allen-Bradley
Model Number
1336-PB-SP2B
Spare Part Number
74101-502-51
Component Type
Precharge PC Board
Weight
0.3 kg
Installation Guidelines
Ensure the drive is completely disconnected from the main power supply and that the DC bus capacitors have been fully discharged before attempting to access or replace the board.
Observe standard electrostatic discharge (ESD) precautions when handling the circuit board to prevent damage to integrated components.
Verify that the replacement board matches the original part number and revision level required by your specific drive model.
Ensure all ribbon cables and terminal connections are securely seated and free of debris or oxidation before restoring power.
Inspect the surrounding drive environment for signs of heat damage or debris that may have contributed to the failure of the previous board.
FAQIs the 1336-PB-SP2B still in production?No, this model has been discontinued by the manufacturer. We provide high-quality spare parts to support legacy systems.What is the function of this board?The precharge board limits the current flowing into the drive's DC bus capacitors during the initial power-up phase to prevent damage to the rectifier and contactor components.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB 1SBL351001R8011 is a block-type contactor from the A-series, designed for reliable power switching in industrial applications. This unit, identified by the spare model A50-30-11, is engineered to handle demanding electrical loads with high operational efficiency. It provides robust performance for motor control, heating, and lighting systems, ensuring long-term durability in industrial environments.Features
Reliable block-type design for standard industrial mounting.
Designed for high-performance switching of power circuits.
Compact footprint suitable for space-constrained control cabinets.
Engineered for durability and consistent operation in heavy-duty applications.
Technical Specifications
Product Model
1SBL351001R8011
Spare Model
A50-30-11
Product Type
DC Contactor
Manufacturer
ABB
Weight
1.06 kg
Installation Guidelines
Ensure the power supply is disconnected before installation or maintenance to prevent electrical hazards.
Mount the contactor on a flat, stable surface or DIN rail as specified by the manufacturer's mounting orientation requirements.
Verify that the control voltage matches the coil rating before energizing the device.
Ensure all terminal connections are tightened to the specified torque to prevent overheating and poor conductivity.
Maintain adequate clearance around the unit to allow for proper heat dissipation during operation.
Follow standard ESD and safety protocols when handling industrial control components.
FAQWhat is the primary function of the 1SBL351001R8011 contactor?This device is an electromechanical contactor used for switching electrical power circuits, typically used in motor control or power distribution systems.Is this contactor suitable for high-vibration environments?The ABB A-series contactors are designed for standard industrial use. For extreme vibration environments, ensure the unit is mounted in an appropriate enclosure with vibration-dampening measures if necessary.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB DSAO120A (3BSE018293R1) is an analog output module designed for the Advant S100 I/O system. This board provides high-precision signal conversion and reliable output control for industrial automation applications, supporting both current and voltage signal ranges to interface with a variety of field devices.Features
Supports multiple output ranges: 4–20 mA, 0–10 VDC, and ±10 VDC.
High-resolution 16-bit output for precise process control.
Robust isolation: 250 VAC channel-to-channel and 1500 VAC channel-to-backplane.
Low power consumption of ≤2 W, powered via the system backplane.
Compact design optimized for Advant S100 rack mounting.
Technical Specifications
Model
DSAO120A
Order Code
3BSE018293R1
Output Current
4–20 mA
Output Voltage
0–10 VDC, ±10 VDC
Resolution
16-bit
Accuracy
±0.05% of full scale at 25 degC
Temperature Drift
±0.005%/degC
Supply Voltage
24 VDC (±10%)
Power Consumption
≤2 W
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the S100 I/O rack.
Handle the module using proper ESD (Electrostatic Discharge) protection measures to prevent damage to internal components.
Verify that the backplane connector is clean and free of debris before seating the module.
Ensure proper grounding of the I/O rack to maintain signal integrity and safety isolation.
Route analog signal cables away from high-voltage or high-EMI sources to minimize interference.
FAQWhat is the primary function of the DSAO120A module?The DSAO120A is an analog output board used in ABB Advant S100 I/O systems to convert digital control signals from the controller into analog current or voltage signals for field instrumentation.Is this module compatible with other S100 I/O components?Yes, the DSAO120A is designed specifically for the S100 I/O series and is intended for use within compatible Advant controller racks.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe ABB 086444-001, also identified as the MPRC Scanning Board, is a specialized printed wiring assembly (PWA) designed for industrial control applications. This module features direct fiber optic connectivity, facilitating high-speed and reliable data communication within the control system architecture. It is engineered to perform critical scanning functions while maintaining robust isolation from the backplane.Features
Direct fiber optic interface for enhanced signal integrity and noise immunity.
High-voltage optical isolation rated at 2500 VDC.
Supports cable lengths up to 300 meters per channel.
Designed for integration into standard ABB control system backplanes.
Wide operating temperature range suitable for industrial environments.
Technical Specifications
Product Model
086444-001 (MPRC)
Manufacturer
ABB
Back-plane Power
+5 V @ 1.2 A
Isolation
2500 VDC optical
Max Cable Length
300 m per channel
Operating Temperature
0 degC to +60 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5% to 95% RH (non-condensing)
Installation Guidelines
Ensure the system power is completely disconnected before inserting or removing the scanning board from the backplane.
Handle the module by the edges to prevent electrostatic discharge (ESD) damage to sensitive components.
Verify that the fiber optic connections are clean and properly seated to maintain signal integrity.
Ensure the module is securely fastened to the rack to prevent vibration-induced disconnection.
Maintain adequate ventilation in the cabinet to ensure the ambient temperature remains within the specified 0 degC to +60 degC range.
FAQWhat is the primary function of the 086444-001 MPRC board?The 086444-001 is a scanning board used for data acquisition and communication within ABB control systems, specifically utilizing direct fiber optic interfaces for signal transmission.What is the maximum fiber optic cable length supported?This module supports a maximum cable length of 300 meters per channel.Is this module hot-swappable?It is standard industrial practice to power down the associated backplane or rack before installing or removing I/O or communication modules to prevent electrical shorts or data corruption.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe GE Fanuc Emerson IC200CHS112 is a high-density interposing relay expansion base designed for the Versamax I/O and PLC platform. This module features 16 discrete points with replaceable relay channels, engineered to isolate sensitive control electronics from high-power field actuators. By facilitating quick field-level relay replacement without the need to disrupt existing system wiring, this unit significantly reduces mean time to repair (MTTR) and protects the backplane from electrical surges, ensuring continuous operation in demanding industrial environments.Features
16-point high-density interposing relay architecture.
Replaceable relay channels for simplified maintenance.
Electrical isolation between control electronics and field devices.
Supports mixed-voltage switching profiles via external load power sources.
Flexible wire gauge compatibility (12 to 24 AWG).
Designed for high-vibration industrial control cabinet environments.
ApplicationsThis expansion base is widely utilized in power generation facilities, chemical processing plants, and water treatment infrastructure where reliable high-current switching and electrical isolation are required for PLC-based control systems.Technical Specifications
Brand
GE Fanuc / Emerson
Model
IC200CHS112
Product Line
Versamax
Points
16
Terminal Type
Relay Interposing
Max Output Current per Terminal
8 Amps
Relay Coil Power
24 VDC
Output Voltage Range
5/24/125 VDC or 120/240 VAC
Wire Size
12 to 24 AWG
Terminal Torque
0.5 to 0.6 Nm
Operating Humidity
35% to 85% (non-condensing)
Installation Guidelines
Ensure the PLC system power is disconnected before installing or removing the expansion base.
Mount the base securely to the DIN rail or backplane according to Versamax system specifications.
Verify that all field wiring is properly stripped and secured within the terminal blocks to the specified torque of 0.5 to 0.6 Nm.
Maintain proper clearance for cooling and cable routing to minimize EMI interference from high-voltage lines.
Handle with ESD precautions to prevent damage to internal control circuitry.
FAQDoes this module include the relays?Yes, the IC200CHS112 is designed with replaceable relay channels, allowing for individual relay maintenance or replacement as needed.Can this module switch different voltages?Yes, because the output contacts utilize an external load power source, the module supports mixed-voltage switching across its 16 points, provided the external power requirements are met.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Allen-Bradley 1794-PS13 is a robust, industrial-grade power supply module designed for the FLEX I/O distributed system. It converts standard AC line power into a regulated 24V DC output, providing essential power to FLEX I/O communication adapters and field-side circuitry. By delivering a stabilized power source, this module helps protect sensitive digital and analog signals from external power fluctuations within the I/O rack.Features
Wide AC input voltage range (85-264V AC) for global compatibility.
Space-saving design for standard 35mm DIN rail mounting.
Integrated over-voltage and over-current protection.
Status diagnostic indicator for quick troubleshooting.
Designed specifically for the FLEX I/O platform.
Applications
Automotive assembly stations for pneumatic valves and sensors.
Packaging and bottling lines requiring reliable power for conveyors and sorting gates.
Material handling systems including palletizers and automated storage systems.
Machine tool control, including coolant pumps and interlocks.
Industrial HVAC control skids for dampers and fans.
Technical Specifications
Model
1794-PS13
Input Voltage Range
85-264V AC
Input Frequency
47-63 Hz
Output Voltage
24V DC
Output Current
1.3 A
Output Power
31.2 W
Max Input Current
0.7 A
Overcurrent Protection
1.4 A
Power Dissipation (Max)
7 W
Installation Guidelines
Mounting: Hook the module onto a 35mm DIN rail and rotate it down until the locking tab snaps securely into place.
AC Input Wiring: Connect 120/230V AC to the input terminals (A, B, C).
DC Output Wiring: Connect the 24V DC output to the FLEX I/O adapter (Terminal G: +24V DC, Terminal H: 24V DC common).
Daisy-Chaining: Use terminals D, E, and F to daisy-chain AC power to additional power supply modules if required.
Ensure power is disconnected before installing or removing the module to prevent electrical shock or equipment damage.
FAQWhat is the 1794-PS13 power supply?The 1794-PS13 is a 24V DC field power supply module within the Allen-Bradley FLEX I/O product family. It provides power to input/output devices connected to the terminal bases.How many adapter modules can the 1794-PS13 power?It provides sufficient 24V DC power to operate up to 4 adapter modules, though it is not designed to power an entire large FLEX I/O system.What is the output power and current?It has a nominal output of 24V DC, a maximum output current of 1.3 A, and an output power of 31.2 Watts.What is the input voltage range of the 1794-PS13?This module accepts a wide input voltage range of 85–264V AC, 47–63 Hz, suitable for global applications.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
