Keterangan

Yokogawa AFV30D-A41251 Duplex Field Control Unit

The Yokogawa AFV30D-A41251 serves as the primary AFV30D Duplex Field Control Unit utilized to execute control computations and manage input/output data processing across Vnet/IP platform networks.

Suffix Breakdown & Model Matrix

Code Segment	Specification Detail	Description
AFV30D	Base Model	Duplex Field Control Unit (for Vnet/IP, 19-inch Rack Mountable)
-A	Standard Type	Standard Type for general industrial environments
4	Dual-Redundant Power Supply	220 V to 240 V AC Power Supply (Dual-redundant)
1	Memory Expansion	Standard 8 MB Control Capacity
2	LFS1700 Control Function License	For AFV30D/AFV40D (Standard functions)
5	Subsystem Communication	Dual-redundant Vnet/IP network communication
1	Explosion Protection / Option	Basic standard type with no specific hazardous area options

Hardware Specifications

Parameter	Specification
Model Brand	Yokogawa
Origin	Japan
Weight	Approx. 7 kg to 8 kg
Dimensions	19-inch rack-mountable standard dimensions
Operating Temp	0 to 50 degC
Operating Humidity	10% to 90% RH (Non-condensing)
Power Supply Voltage	220 V to 240 V AC (50/60 Hz)
Processor	VR5532 (350 MHz)
Main Memory Capacity	128 MB
Control Capacity Memory	8 MB
Battery Backup	Up to 72 hours for main memory
Battery Recharge Time	Minimum 48 hours for full recharge
Network Interface	Dual-redundant Vnet/IP (1 Gbps)
READY Contact Output	2 terminals (NC, C)
Node Unit Capacity	Up to 13 units per FCU
I/O Module Capacity	Accommodates up to 8 modules
Cooling Method	Natural air cooling (Fanless)

Distributed Process Instrument Connectivity

The processor architecture utilizes hardware layers capable of mapping field variables through 4-20 mA HART loop protocols and integrating high-density fieldbus segments. Digital control blocks interface directly with internal register matrices to manage FOUNDATION Fieldbus and Profibus PA connectivity via peripheral communication modules. Channel-to-channel isolation is maintained across the bus interface to suppress common-mode noise, while cold junction compensation (CJC) algorithms run deterministically within the CPU cycle to ensure thermocouple measurement linearity across remote I/O processing nodes.

Frequently Asked Questions

Q: What occurs during a CPU module fault state under the duplex configuration?

A: The unit initiates an instantaneous, zero-switchover transfer from the active processor module to the standby processor module via the "Pair-and-Spare" architecture. This internal hardware switchover causes zero disruption to execution cycles or Vnet/IP communication streams.

Q: What are the maintenance constraints regarding the processor and power supply modules?

A: Because both the CPU and power supply modules are deployed in dual-redundant pairs, online maintenance and individual module replacement are supported without interrupting controller computation or cutting power to the active backplane.

Field Installation Guidelines

• Mounting and Orientation: Secure the unit horizontally into standard 19-inch instrument racks using specified chassis screws. Maintain unrestricted vertical clearance above and below the housing to facilitate natural convection cooling across the fanless heat sink surfaces.
• Power Distribution: Feed independent, isolated 220-240 V AC lines to each of the dual power supply inputs. Verify that phase synchronization and grounding topology align with the redundant input terminal design rules.
• Grounding Infrastructure: Connect the dedicated grounding terminal directly to a single-point instrument ground busbar. Ensure the ground wire path avoids daisy-chain configurations with heavy electrical machinery or inverter drives to eliminate ground loop currents.
• Communication Wiring: Route Vnet/IP Ethernet cables through distinct cable trays separated from high-voltage AC lines to prevent electromagnetic induction. Terminate both Vnet/IP network paths into separate network switches to preserve system redundancy.

Spesifikasi

• Merek: Yokogawa
• 
  :
  

Keuntungan

• Keandalan tinggi di lingkungan industri
  
  
• Mendukung operasi berkelanjutan
• Kompatibel dengan sistem PLC/DCS utama