Honeywell FS-PDB-IOX05 Power Distribution Board The Honeywell FS-PDB-IOX05, also cataloged as the FS-PDB-IOX05 Power Distribution Board, operates as a dedicated...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Honeywell FS-PDB-IOX05 Power Distribution Board
The Honeywell FS-PDB-IOX05, also cataloged as the FS-PDB-IOX05 Power Distribution Board, operates as a dedicated hardware component for controller chassis power distribution within Honeywell industrial control system platforms. It distributes 5 VDC chassis rail power through a 4-pin action-pin header connection and supports DIN-rail mounting configurations.
Hardware Specifications
Parameter
Specification
Model
FS-PDB-IOX05
Brand
Honeywell
Product Type
Power Distribution Board
Origin
USA
Weight
0.22 kg
Dimensions
17.1 x 7.1 x 5.8 cm
Operating Temp
-40 deg C to +70 deg C
Power Consumption
Supplied from controller chassis 5 VDC rails
Input Voltage
Controller chassis 5 VDC rails
Connector Type
4-pin action-pin header
Mounting Method
DIN-rail TS32 / TS35 x 7.5 mm
Humidity
Up to 95% RH, non-condensing
Tariff Code
8537101190
Place of Shipment
Xiamen, China
DCS Power Distribution and Channel Isolation Features
The Honeywell FS-PDB-IOX05 provides physical power routing between controller chassis supply rails and connected field hardware interfaces. It uses a dedicated 4-pin action-pin header for electrical connection and maintains compatibility with Honeywell controller chassis power distribution arrangements.
In addition, the board supports DIN-rail installation for compact control cabinet integration. The design follows industrial process control installation practices, where clear wiring separation and proper grounding methods reduce electrical interference risks.
The module operates within Honeywell process control environments that commonly use channel-to-channel isolation concepts for I/O signal integrity. However, the FS-PDB-IOX05 functions as a power distribution component rather than an analog or digital signal acquisition module.
Frequently Asked Questions
Q: What voltage source does the FS-PDB-IOX05 use? A: The FS-PDB-IOX05 receives power from controller chassis 5 VDC supply rails.
Q: What mounting method does the FS-PDB-IOX05 support? A: The module supports DIN-rail mounting with TS32 and TS35 x 7.5 mm rail configurations.
Q: What environmental temperature range applies to the FS-PDB-IOX05? A: The operating temperature range is -40 deg C to +70 deg C.
Field Installation Guidelines
Install the FS-PDB-IOX05 on a compatible DIN rail inside the control cabinet.
Verify that the controller chassis provides the required 5 VDC rail supply before connection.
Inspect the 4-pin action-pin header before installation to confirm proper mechanical alignment.
Route power wiring separately from high-current switching circuits and high-noise equipment.
Connect cabinet grounding according to the applicable industrial electrical installation standard.
Maintain sufficient cabinet clearance to support airflow and thermal management.
Confirm connector seating after installation before applying system power.
