Honeywell CC-TDIL01 51308386-175 Digital Input Board The Honeywell CC-TDIL01 51308386-175, also cataloged as the CC-TDIL01 Digital Input Board, provides direct...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Honeywell CC-TDIL01 51308386-175 Digital Input Board
The Honeywell CC-TDIL01 51308386-175, also cataloged as the CC-TDIL01 Digital Input Board, provides direct electrical acquisition of discrete field signals within the Experion PKS C300 I/O subsystem. The module executes 32-channel digital state acquisition with optical isolation implemented at the IOM level, converting 18 to 30 VDC field input states into controller-readable logic with defined scan latency behavior.
Suffix Breakdown & Model Matrix
No validated internal segmentation or functional partitioning is defined in the provided manufacturer dataset for CC-TDIL01 51308386-175. The identifier is treated as a single catalog and spare assembly reference without documented structural decoding rules.
Hardware Specifications
Parameter
Specification
Model
CC-TDIL01 51308386-175
Brand
Honeywell
Origin
USA
Weight
0.38 kg
Dimensions
22 x 12 x 6.8 cm
Operating Temp
Not specified
Power Consumption
Not specified
Input Channels
32 digital inputs
DI Power Voltage Range
18 to 30 VDC
ON Sense Threshold
13 VDC min or 3 mA min
OFF Sense Threshold
5 VDC max or 1.2 mA max
Input Delay
5 ms ± 20%
Isolation Method
Optical isolation (IOM level)
Honeywell Digital Input Architecture Characteristics
Within the Honeywell Experion C300 I/O framework, the CC-TDIL01 implements channel-level signal conditioning aligned with distributed control scanning principles. Digital field states are routed through optically isolated input stages in the IOM architecture, reducing direct electrical coupling between field wiring and backplane logic domains.
The 5 ms input filter and isolation delay defines deterministic state evaluation timing across all 32 channels, ensuring uniform scan alignment under mixed-load discrete signal conditions. This architecture is consistent with Honeywell DCS I/O design patterns where channel integrity is maintained through isolation segmentation rather than shared common-mode referencing.
Frequently Asked Questions (FAQ)
Q: Does CC-TDIL01 support hot-swap removal under load conditions? A: Hot-swap behavior is dependent on C300 I/O carrier configuration. Electrical field termination must be de-energized or managed via system-approved maintenance mode before module extraction.
Q: What is the effective backplane load contribution of this module? A: Backplane current consumption is not specified in the provided dataset. Load contribution is managed at the I/O termination assembly and chassis power budget level.
Q: Are input channels independently isolated? A: Inputs are processed through optical isolation stages at the IOM level, providing electrical separation between field input groups and controller-side logic processing.
Field Installation Guidelines
Verify field supply voltage remains within 18 to 30 VDC range prior to termination.
Maintain correct polarity alignment across all discrete input terminals to avoid false state detection.
Ensure shielded cable routing where applicable, with single-point grounding at cabinet earth reference.
Avoid parallel routing with high-frequency switching lines to minimize induced transient coupling.
Confirm module seating integrity within the I/O chassis before energizing system backplane.
Perform channel continuity validation prior to enabling control logic scan.
