Keterangan

Honeywell 51306856-175 Digital Input Terminal Assembly

Configured for 24 VDC discrete signal acquisition in Honeywell Experion PKS C300 Controller Series 8 systems, the Honeywell 51306856-175 (8C-TDIL01 / 8U-TDIL01 Digital Input Terminal Assembly) provides direct electrical interfacing between field devices and digital control processing modules.

Hardware Specifications

Parameter	Specification
Model	51306856-175
Brand	Honeywell
Product Type	Digital Input Terminal Assembly
System Compatibility	Honeywell Experion PKS / C300 Controller Series 8
Associated Models	8C-TDIL01 (Conformal Coated), 8U-TDIL01 (Uncoated)
Input Type	Digital Input, 24 VDC discrete signals
Number of Channels	32 Channels
Nominal Input Voltage	24 VDC
Input Voltage Range	18 VDC to 30 VDC
Signal Interface	Dry contact and solid-state digital sensors
Input Logic	Current sinking / sourcing configuration
Isolation Type	Field-to-logic galvanic isolation
Isolation Rating	1500 VAC / 2500 VDC
Coating Option	8C-TDIL01 conformal coating; 8U-TDIL01 uncoated design
Operating Temp	0 deg C to 60 deg C
Storage Temp	-40 deg C to 85 deg C
Relative Humidity	5% to 95% RH, non-condensing
Mounting Type	I/O Module Carrier / DIN Rail Mount Assembly

Channel Isolation and Process Control Interface

The Honeywell 51306856-175 interfaces field discrete signals with Experion PKS Series 8 control hardware through isolated digital input channels. Therefore, the assembly separates field wiring circuits from controller electronics to reduce electrical interference caused by industrial switching devices.

The module supports 32-channel digital input acquisition for devices including limit switches, relay contacts, and discrete status sensors. In addition, the conformal coated 8C-TDIL01 version applies protective coating technology for environments requiring resistance against moisture and corrosive atmospheric conditions.

The terminal assembly operates within Honeywell process control architectures where channel-to-channel isolation and field signal conditioning maintain stable digital status transmission.

Frequently Asked Questions

Q: What field signals can the Honeywell 51306856-175 accept?
A: The module accepts 24 VDC discrete input signals from dry contacts and solid-state field devices. The input circuitry converts these field states into digital information for Experion PKS control processing.

Q: What is the difference between 8C-TDIL01 and 8U-TDIL01 configurations?
A: The 8C-TDIL01 version uses conformal coating for additional environmental protection, while the 8U-TDIL01 version uses an uncoated construction for standard installation environments.

Q: Does the module provide electrical isolation between field wiring and controller electronics?
A: Yes. The assembly provides galvanic isolation between field circuits and logic-side electronics to limit electrical noise transfer and protect connected control hardware.

Field Installation Guidelines

• Install the module on the specified Honeywell Series 8 I/O carrier assembly according to system hardware documentation.
• Verify field wiring polarity and voltage levels before connecting 24 VDC digital input circuits.
• Separate low-level signal wiring from high-current switching cables to reduce electromagnetic interference.
• Connect cable shields according to the plant grounding standard and avoid multiple grounding points that can create ground loops.
• Confirm terminal tightening conditions and inspect wiring insulation before system startup.
• For coated versions, avoid mechanical damage to protective surfaces during handling and installation.
• Verify controller configuration and channel assignment before enabling field device operation.

Spesifikasi

• Merek: Honeywell
• 
  :
  

Keuntungan

• Keandalan tinggi di lingkungan industri
  
  
• Mendukung operasi berkelanjutan
• Kompatibel dengan sistem PLC/DCS utama