GE Multilin UR7CH UR-7CH Universal Relay Chassis The GE Multilin UR7CH, also cataloged as the UR7CH Universal Relay Chassis, operates as a dedicated...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE Multilin UR7CH UR-7CH Universal Relay Chassis
The GE Multilin UR7CH, also cataloged as the UR7CH Universal Relay Chassis, operates as a dedicated hardware component for modular rack enclosure and system module integration within GE Universal Relay (UR) protection and control platforms.
Hardware Specifications
Parameter
Specification
Model
UR7CH
Brand
GE Multilin
Weight
0.5 kg
Dimensions
7U height, 19.0 in / 482.6 mm width, 8.82 in / 224.0 mm depth excluding wiring terminals
Operating Temp
-40 deg C to +60 deg C
Power Consumption
Dependent on installed UR modules and system configuration
Chassis Design
19-inch rack mount horizontal chassis
Module Capacity
Up to 19 vertical module slots depending on backplane configuration
Housing Material
Heavy-gauge aluminum / steel enclosure with protective coating
Protection Class
IP40 front panel, IP20 rear terminals
Compatible Platform
GE Universal Relay (UR) Series
Profinet / EtherNet-IP Deterministic Networks and I/O Density Scaling
The GE Multilin UR7CH is designed as a modular hardware carrier for GE UR protection platforms, supporting high-density installation of CPU modules, power supply modules, CT/VT input modules, digital I/O cards, and communication interfaces. The chassis backplane provides mechanical alignment and electrical interconnection between installed UR plug-in modules.
The modular slot arrangement enables I/O density scaling by allowing different combinations of protection, monitoring, and communication modules within the same enclosure. Firmware flash compatibility and module-level configuration management depend on the specific UR device modules installed in the chassis.
The chassis construction supports installation in electrically noisy substation environments where module separation, grounding practices, and controlled wiring routing are required for stable signal processing.
Frequently Asked Questions
Q: Does the UR7CH chassis contain an independent protection processor? A: No. The UR7CH is a passive modular chassis structure. Protection processing functions are performed by installed GE UR CPU and application modules.
Q: Can UR modules be replaced while the chassis is energized? A: Hot-swap capability depends on the installed UR module type and system configuration. Module replacement procedures must follow GE specified maintenance requirements and power isolation practices.
Q: How is communication between installed UR modules maintained? A: Installed modules communicate through the chassis backplane interface. Communication functions depend on the specific CPU, I/O, and communication modules installed.
Field Installation Guidelines
Install the UR7CH chassis in a compatible 19-inch equipment rack with sufficient mechanical support for the chassis weight and installed modules.
Verify that the rack grounding system provides a low-impedance protective earth connection. Shielded signal cables should be routed separately from high-voltage power conductors and connected according to the installed module wiring requirements.
Maintain correct module insertion alignment during installation to prevent damage to backplane connectors. Ensure rear terminal wiring is secured and arranged to avoid excessive mechanical stress on terminal blocks.
Environmental installation should maintain the specified operating temperature and humidity limits. Avoid locations with direct water exposure, excessive vibration, or uncontrolled electromagnetic interference sources.
