GE Multilin UR5AH UR-5AH Transducer I/O Plug-in Module The GE Multilin UR-5AH, also cataloged as the UR5AH Transducer I/O Module, operates as a...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE Multilin UR5AH UR-5AH Transducer I/O Plug-in Module
The GE Multilin UR-5AH, also cataloged as the UR5AH Transducer I/O Module, operates as a dedicated hardware component for analog transducer signal acquisition and conversion within the GE Multilin Universal Relay (UR) Series platform. It interfaces external DC current and voltage signals with the relay processing system for metering, telemetry, and protection functions.
Hardware Specifications
Parameter
Specification
Model
UR5AH / UR-5AH
Brand
GE Multilin / General Electric
Operating Temp
-20 deg C to +60 deg C
Power Consumption
Not specified in available data
Series
Universal Relay (UR) Family
Module Type
Transducer Input/Output (I/O) Module
Signal Input / Output
Analog DC current and voltage signals (mA, V)
Isolation Voltage
Up to 2.0 kV RMS for 1 minute
Response Time
Less than 50 ms
Mounting Type
Plug-in card for GE UR chassis rear slot
GE Multilin UR Backplane Communication and I/O Integration
The UR5AH module uses the modular architecture of the GE Multilin Universal Relay platform to transfer processed transducer data between external analog circuits and the relay CPU system. The plug-in card design supports I/O density scaling by allowing additional functional modules to be installed within compatible UR chassis configurations.
The module provides galvanic and optical isolation between field signal circuits and internal relay electronics. This isolation structure reduces the influence of surge events and electromagnetic interference on signal processing paths. Diagnostic status information is exchanged with the main CPU card for continuous module condition monitoring.
The module is designed for integration with UR Series relay platforms including C30, C60, D30, D60, F35, F60, G30, G60, T60 and related configurations supporting transducer I/O functions.
Frequently Asked Questions
Q: Is the UR5AH designed for hot-swap installation? A: The UR5AH is a plug-in module designed for installation in a GE UR chassis slot. Hot-swap operation depends on the specific UR chassis configuration and operating procedure.
Q: What type of signals can the UR5AH process? A: The module processes analog DC current and voltage signals from external transducers and instrumentation circuits.
Q: How is the module protected from electrical interference? A: The UR5AH uses galvanic and optical isolation between signal channels and internal relay circuitry to reduce electrical interference coupling.
Field Installation Guidelines
Install the UR5AH only in compatible GE Multilin Universal Relay chassis positions defined for transducer I/O modules. Verify the chassis slot assignment before insertion.
Maintain proper separation between analog signal wiring and high-voltage switching conductors. Use shielded cables for low-level analog signals where required by the installation environment, and connect cable shields according to the site grounding standard.
Confirm connector seating and mechanical locking after module insertion. Check relay diagnostics after installation to verify module recognition, communication status, and channel operation.
