GE IS420UCSBH1A Mark VIe UCSB Controller Module The GE IS420UCSBH1A, also cataloged as the IS420UCSBH1A UCSB Controller Module, operates as a dedicated hardware...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE IS420UCSBH1A Mark VIe UCSB Controller Module
The GE IS420UCSBH1A, also cataloged as the IS420UCSBH1A UCSB Controller Module, operates as a dedicated hardware component for turbine control logic execution and deterministic IONet communication within GE Mark VIe / Mark VIeS control systems. The module executes compiled application logic and manages distributed I/O data exchange.
Hardware Specifications
Parameter
Specification
Model
IS420UCSBH1A
Brand
GE
Origin
United States
Weight
1.1 kg
Dimensions
50 mm W x 146 mm H x 204 mm D
Operating Temp
-40 deg C to +70 deg C
Power Consumption
15.6 W typical, 26.7 W peak
Product Type
UCSB Controller Modules
System Platform
Mark VIe / Mark VIeS, EX2100e, LS2100e
Processor
Intel EP80579 @ 600 MHz
Memory
256 MB ECC DDR2 RAM, 2 GB NAND Flash
Operating System
QNX Neutrino Real-Time OS
Power Supply
18-30 VDC, nominal 24 VDC
Communication
4 x 100 Mbps IONet RJ-45 ports
Clock Synchronization
IEEE 1588 PTP, sub-100 us accuracy
Mounting
Direct panel mount, vertical orientation
Cooling Design
Fanless vertical fin cooling
Certifications
UL, ATEX Zone 2, IECEx
Profinet / EtherNet-IP Deterministic Networks and Firmware Flash Compatibility
The IS420UCSBH1A functions as the main processing module within the GE Mark VIe distributed control architecture. The controller executes compiled ladder and function block application code while coordinating data exchange with remote I/O packs through deterministic IONet communication channels.
The controller architecture supports I/O density scaling by separating processing functions from field acquisition hardware. Remote I/O packs perform field signal conversion while the UCSB module manages control execution, sequencing, and communication scheduling.
The module uses four 100 Mbps IONet Ethernet interfaces with IEEE 1588 Precision Time Protocol synchronization. The timing architecture supports coordinated control execution across distributed Mark VIe hardware nodes.
Firmware and application compatibility are managed through the QNX Neutrino real-time operating system environment and NAND flash storage. The fanless and battery-less design removes mechanical cooling and backup battery components from the controller assembly.
Frequently Asked Questions
Q: Does the IS420UCSBH1A include onboard field I/O channels? A: No. The UCSB Controller Module is a standalone processor and communicates with distributed I/O packs through IONet interfaces.
Q: What power input range is supported by the IS420UCSBH1A? A: The module accepts 18-30 VDC input power with a nominal operating voltage of 24 VDC.
Q: How is communication synchronization performed on this controller? A: The module uses IEEE 1588 PTP synchronization through the IONet communication architecture with sub-100 us timing accuracy.
Field Installation Guidelines
Install the IS420UCSBH1A using the specified panel mounting orientation with vertical fin cooling clearance maintained around the module.
Verify DC power polarity, grounding connections, and IONet cable connections before energizing the controller. Use approved Ethernet cabling practices for IONet communication paths and avoid routing communication cables parallel to high-current power conductors.
Maintain separation between control wiring and electromagnetic noise sources. Confirm network topology, controller addressing, and firmware compatibility before loading application configurations.
Do not install additional cooling fans or battery components because the module is designed for fanless and battery-less operation.
