GE IS200JPDDG1AAA Mark VI DC Power Distribution Board The GE IS200JPDDG1AAA, also cataloged as the IS200JPDDG1AAA DC Power Distribution Board, operates as a...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE IS200JPDDG1AAA Mark VI DC Power Distribution Board
The GE IS200JPDDG1AAA, also cataloged as the IS200JPDDG1AAA DC Power Distribution Board, operates as a dedicated hardware component for redundant DC power distribution and protection within the GE Mark VI/Mark VIe turbine control platform. It distributes DC supply inputs to controllers, I/O packs, and auxiliary devices through fused output channels.
Hardware Specifications
Parameter
Specification
Model
IS200JPDDG1AAA
Brand
GE
Product Type
DC Power Distribution Boards
System Platform
Mark VI / Mark VIe Speedtronic Turbine Control System
Board Type
Jumper Power Distribution Dual (JPDD) Board
Input Voltage
24 VDC nominal (20 to 30 VDC); variants support 48 VDC or 125 VDC
Redundancy
Dual or triple redundant input feeds with automatic failover
Outputs
10 to 16 fused output channels
Output Current
Up to 8 A per channel, 32 A total continuous
Fuse Type
Replaceable OEM 5 x 20 mm fast-blow fuses
Diagnostic Feedback
Fault telemetry to IS220PPDA modules
Isolation
2500 VAC galvanic separation between power and feedback circuits
Mounting
DIN rail or rack-mounted
Protection Features
Conformal coating and surge suppression
Microprocessor
Intel Celeron 300 MHz
Operating System
QNX
Operating Temp
-40 to +70 deg C
Storage Temp
-40 to +85 deg C
Humidity
5% to 95% non-condensing
Weight
0.9 kg
Industrial Control Power Distribution Characteristics
The GE IS200JPDDG1AAA provides DC power distribution functions within the Mark VI/Mark VIe turbine control cabinet architecture. The board accepts redundant DC input sources and distributes protected power through individually fused output branches for controllers, I/O packs, trip solenoids, and auxiliary monitoring devices.
The JPDD board supports industrial control power architecture through I/O density scaling and structured DC branch distribution. Diagnostic feedback circuits provide status information including fuse loss, undervoltage conditions, and ground fault monitoring through compatible IS220PPDA interface modules.
The AAA suffix configuration includes conformal coating for environmental protection against dust, humidity, and oil mist exposure. Hardware replacement requires verification of controller configuration and firmware flash compatibility within the Mark VI/Mark VIe platform.
Frequently Asked Questions
Q: What input voltage ranges are supported by the IS200JPDDG1AAA? A: The board supports 24 VDC nominal input operation, with variants available for 48 VDC and 125 VDC supply configurations.
Q: How are output faults isolated on this power distribution board? A: Individual fused output channels isolate branch faults to prevent a single output fault from affecting the complete DC distribution bus.
Q: What diagnostic information can be transmitted from the board? A: The board provides diagnostic feedback including fuse status, undervoltage conditions, and ground fault indications through compatible PPDA modules.
Field Installation Guidelines
Install the IS200JPDDG1AAA in the designated Mark VI/Mark VIe turbine control cabinet location using the specified DIN rail or rack mounting hardware. Verify DC input polarity and redundant supply connections before energizing the board.
Route DC power wiring separately from low-level signal cables to reduce electromagnetic interference. Use appropriate grounding methods for the cabinet structure and verify protective earth connections.
Check all output fuse ratings, field wiring assignments, and connected device power requirements before commissioning. Confirm diagnostic communication with the IS220PPDA interface and verify power distribution status after installation.
