GE IS200EXHSG4A High-Speed Analog Signal Conditioning and Isolation Module The GE IS200EXHSG4A, also cataloged as the IS200EXHS High-Speed Analog Signal Conditioning and Isolation...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE IS200EXHSG4A High-Speed Analog Signal Conditioning and Isolation Module
The GE IS200EXHSG4A, also cataloged as the IS200EXHS High-Speed Analog Signal Conditioning and Isolation Module, operates as a dedicated hardware component for high-speed analog signal acquisition and isolated data processing within GE Mark VI and Mark VIe Turbine Control Systems. The module handles transient vibration and pressure signals through high-resolution conversion channels.
Hardware Specifications
Parameter
Specification
Model
IS200EXHSG4A
Brand
GE
Origin
United States
Weight
0.65 kg
Dimensions
230 mm x 170 mm x 30 mm
Operating Temp
-25 to +75 deg C
Power Consumption
Not specified
Product Type
High-Speed Analog Signal Conditioning and Isolation Modules
System Platform
GE Mark VI / Mark VIe Turbine Control System
Signal Channels
12 configurable channels (8 inputs, 4 outputs)
Sampling Rate
100 kS/s per channel, simultaneous
Resolution
18-bit ADC/DAC
CMRR
>120 dB
Isolation
2000 Vrms channel-to-ground
Processor
AMD G-Series dual-core, 1.6 GHz
Memory
2 GB DDR3 SDRAM, 128 GB storage
Operating System
QNX Neutrino RTOS
Safety Compliance
IEC 61508 SIL 2/3
Redundancy Support
Simplex, Duplex, TMR configurations
Coating
IPC-CC-830 Class 3A coating
Rotor Dynamics and High-Speed Signal Isolation Processing
The IS200EXHSG4A processes high-frequency turbine condition signals through simultaneous high-speed sampling and isolated analog conversion. The module architecture supports vibration and combustion pressure signal conditioning with high common-mode rejection and channel-to-ground isolation for measurement integrity.
Signal processing functions support rotor dynamics monitoring by capturing transient changes in vibration-related inputs and transferring conditioned data to Mark VI and Mark VIe controllers. Channel isolation and analog conditioning circuits reduce cross-talk effects between measurement paths in high-noise control cabinet environments.
Frequently Asked Questions
Q: What type of signals can the IS200EXHSG4A process? A: The module processes high-speed analog signals including vibration-related inputs and combustion pressure measurement signals through configurable analog channels.
Q: What isolation level is provided by the IS200EXHSG4A? A: The module provides 2000 Vrms channel-to-ground isolation for signal separation and transient protection.
Q: What redundancy configurations are supported? A: The module supports simplex, duplex, and TMR system configurations within compatible Mark VI and Mark VIe architectures.
Field Installation Guidelines
Verify system power removal before installing or replacing the module. Use ESD protection when handling the circuit board assembly. Install the module into the designated Mark VIe rack slot and ensure ribbon cable and backplane connections are fully seated.
Connect field wiring according to the configured analog channel assignments. Maintain separation between low-level measurement wiring and high-current switching circuits. Apply proper shielding and grounding methods to minimize electrical noise coupling into analog measurement paths.
Complete channel calibration and scaling verification through the control system configuration tools before returning the turbine control system to operation.
