GE IS200EDEXG1AFA Exciter Dynamic Expansion Board The GE IS200EDEXG1AFA, also cataloged as the IS200EDEX Exciter Dynamic Expansion Board, operates as a dedicated hardware...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE IS200EDEXG1AFA Exciter Dynamic Expansion Board
The GE IS200EDEXG1AFA, also cataloged as the IS200EDEX Exciter Dynamic Expansion Board, operates as a dedicated hardware component for dynamic signal processing and generator field control execution within GE EX2100 Excitation Control Systems. The board extends analog and digital processing capacity through isolated signal interfaces and fiber-optic communication.
Hardware Specifications
Parameter
Specification
Model
IS200EDEXG1AFA
Brand
GE
Origin
United States
Weight
0.95 kg
Dimensions
160 mm x 100 mm x 20 mm
Operating Temp
-30 to +65 deg C
Power Consumption
5 VDC logic, 24 VDC field supply
Product Type
Exciter Dynamic Expansion Boards
System Platform
GE EX2100 Excitation Control System
Inputs
Analog voltage and current feedback channels
Outputs
Exciter drive signals and diagnostic signals
ADC/DAC Resolution
16-bit
Communication Interface
Fiber-optic serial link
Isolation
2500 Vrms optocoupler isolation
Response Time
< 1 ms
PCB Treatment
Conformal coating
Revision
G1AFA
Firmware Flash Compatibility and Excitation Control Processing
The IS200EDEXG1AFA operates as an expansion processing board within the EX2100 excitation architecture, providing additional I/O density scaling for generator field regulation functions. The board handles dynamic feedback signals through analog conversion circuits and exchanges processed data with the controller through a fiber-optic serial interface.
Firmware flash compatibility is maintained through the EX2100 control configuration environment. Diagnostic functions provide board status monitoring through RUN, STATUS, and FAIL indicators, supporting verification of communication and processing conditions during operation.
Frequently Asked Questions
Q: What communication method is used by the IS200EDEXG1AFA? A: The board communicates with the excitation controller through a fiber-optic serial link designed for deterministic data transfer.
Q: What power supplies are required for the IS200EDEXG1AFA? A: The board requires a 5 VDC logic supply and a separate 24 VDC field supply for operation.
Q: What signal processing resolution does the board provide? A: The board supports 16-bit ADC and DAC signal conversion for excitation feedback and control signals.
Field Installation Guidelines
Verify EX2100 cabinet power isolation before installing the expansion board. Use ESD protection when handling the circuit board assembly. Install the board into the designated exciter rack position and confirm proper backplane connector engagement.
Connect fiber-optic communication channels according to system configuration requirements. Maintain separation between signal wiring and high-current power conductors. Ensure cable routing and shielding practices follow cabinet grounding standards to reduce electromagnetic interference.
Configure communication parameters and board functions through ToolboxST software before system startup. Verify LED status indicators and signal feedback operation after installation.
