GE IS200EACFG1BAA EX2100 Exciter AC Feedback Board The GE IS200EACFG1BAA, also cataloged as the IS200EACFG1BAA Exciter AC Feedback Board, operates as a dedicated...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE IS200EACFG1BAA EX2100 Exciter AC Feedback Board
The GE IS200EACFG1BAA, also cataloged as the IS200EACFG1BAA Exciter AC Feedback Board, operates as a dedicated hardware component for generator AC signal acquisition and feedback conditioning within the GE EX2100 excitation control system. It processes PT and CT inputs and transfers scaled feedback signals to the excitation controller.
Hardware Specifications
Parameter
Specification
Model
IS200EACFG1BAA
Brand
GE
Product Type
Exciter AC Feedback Boards
System Platform
EX2100 Excitation Control System
Board Type
Exciter AC Feedback Board
Input Signals
Generator PT and CT feedback signals
Voltage Input
115 V rms nominal
Current Input
1 A or 5 A CT input
Analog Output
Scaled signals to EMIO, 0-10 V or 4-20 mA
Isolation
500 Vrms channel-to-earth
Mounting
Exciter chassis backplane
Protection Features
Conformal coating and EMI shielding
Compliance
UL 508, IEC 61010-1, RoHS 3
Operating Temp
-30 to +65 deg C
Storage Temp
-40 to +85 deg C
Humidity
5% to 95% non-condensing
Origin
United States
Industrial Control Interface and Firmware Compatibility
The GE IS200EACFG1BAA performs AC feedback signal acquisition and conditioning within the EX2100 excitation architecture. The board receives generator voltage and current feedback from PT and CT circuits, converts these signals into scaled analog outputs, and transfers measurement data through the EMIO interface.
The module supports deterministic signal exchange within GE excitation control hardware. Its signal conditioning circuitry provides channel isolation and feedback scaling for excitation regulation calculations.
The EX2100 platform requires correct hardware identification and firmware flash compatibility when installing replacement boards. I/O configuration parameters must match the installed controller setup before operation.
Frequently Asked Questions
Q: What type of electrical feedback signals are connected to the IS200EACFG1BAA? A: The board accepts generator PT voltage feedback and CT current feedback signals for excitation regulation processing.
Q: What analog outputs are provided by the board? A: The board provides scaled feedback signals to the EMIO interface using 0-10 V or 4-20 mA signal formats.
Q: How is the board installed in the EX2100 system? A: The IS200EACFG1BAA is installed in the exciter chassis backplane and interfaces with the EMIO board and exciter controller.
Field Installation Guidelines
Install the IS200EACFG1BAA in the designated EX2100 exciter chassis backplane position and verify all backplane connections before energizing the system.
Connect PT and CT feedback wiring according to the excitation cabinet drawings. Maintain proper separation between low-level analog feedback cables and high-energy excitation conductors to reduce electromagnetic interference.
Use shielded signal wiring where required and terminate shields according to the cabinet grounding scheme. Verify CT polarity, PT wiring orientation, and isolation requirements before commissioning.
Confirm controller configuration, I/O scaling parameters, and hardware compatibility before placing the excitation system into service.
