GE IS200AEPGG1A Analog Expansion Pack Module The GE IS200AEPGG1A, also cataloged as the IS200AEPGG1A Analog Expansion Pack Module, operates as a dedicated hardware...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE IS200AEPGG1A Analog Expansion Pack Module
The GE IS200AEPGG1A, also cataloged as the IS200AEPGG1A Analog Expansion Pack Module, operates as a dedicated hardware component for analog signal acquisition and output expansion within the GE Mark VI turbine control system.
Hardware Specifications
Parameter
Specification
Model
IS200AEPGG1A
Brand
GE
Weight
0.5 kg
Operating Temp
-30 to +65 deg C
Power Consumption
Approx. 12 W
Product Type
Analog Expansion Pack Module
Series
Mark VI Turbine Control / Drive Control
Functional Description
AEPG Board Assembly
Analog Inputs
16 differential channels
Analog Outputs
4 isolated channels
Input Range
+/-10 VDC, 4-20 mA configurable
Output Range
+/-10 VDC, 4-20 mA configurable
Resolution
16-bit ADC/DAC
Accuracy
+/-0.05% of full scale at 25 deg C
Isolation
1500 Vrms channel-to-backplane
Scan Rate
5 ms typical per channel
PCB Treatment
Conformal coating, G1A revision
Certifications
CE, UL, CSA, RoHS
Deterministic Analog I/O Processing Characteristics
The IS200AEPGG1A provides additional analog processing capacity for GE Mark VI control architectures. The module handles differential analog acquisition and isolated analog output generation for turbine monitoring signals including temperature, pressure, and vibration-related measurements.
The module supports configurable voltage and current signal interfaces through 16-bit ADC/DAC conversion. Channel isolation separates field signal circuits from the backplane interface, reducing interference transfer between external wiring and controller electronics.
For GE industrial control platforms, the AEPG board assembly integrates with deterministic I/O communication structures. Firmware configuration through ToolboxST defines channel operation, signal scaling, and diagnostic parameters.
Frequently Asked Questions
Q: How many analog channels are available on the IS200AEPGG1A? A: The module provides 16 differential analog input channels and 4 isolated analog output channels.
Q: What analog signal types can be configured on this module? A: The IS200AEPGG1A supports configurable +/-10 VDC and 4-20 mA input and output signal ranges.
Q: Can the module be replaced while the control rack is energized? A: The supplied data identifies a hot-swappable design. Replacement procedures should follow the applicable GE Mark VI maintenance documentation and rack operating requirements.
Field Installation Guidelines
Install the IS200AEPGG1A in the designated GE Mark VI I/O rack position and verify correct alignment with the rack connector system before securing the module.
Connect analog field wiring according to the configured channel assignments. Maintain separation between analog signal cables and high-current power conductors to reduce electrical noise coupling.
Terminate cable shields according to the cabinet grounding design. Verify signal polarity, channel scaling, and I/O configuration parameters through ToolboxST before placing the module into service.
Confirm that the conformal-coated PCB remains free from mechanical damage during handling and installation. Ensure all rack fasteners and connectors are properly secured before system startup.
