Keterangan

GE IS200AEADH1ADA Input/Output Grid Fork Board

The GE IS200AEADH1ADA, also cataloged as the IS200AEADH1ADA Input/Output Grid Fork Board, operates as a dedicated hardware component for analog signal acquisition and communication execution within GE Mark VIe wind turbine control system platforms. It processes multi-range voltage and current inputs through isolated I/O channels.

Suffix Breakdown & Model Matrix

Model Segment	Description
IS200	GE Mark VIe control hardware family
AEAD	Application-specific Electronic Assembly - Diagnostic / I/O Grid Fork Board
H1	Hardware configuration identifier
ADA	Assembly and functional option identifier
A	Revision identifier

Hardware Specifications

Parameter	Specification
Model	IS200AEADH1ADA
Brand	GE
Origin	United States
Weight	0.5 kg
Dimensions	120 mm x 162 mm x 95 mm
Operating Temp	-40 deg C to +70 deg C
Power Consumption	Not specified in available technical data
Product Type	Input/Output Grid Fork Boards
Series	GE Mark VIe Wind Turbine Control System
Functional Type	AEAD Application-specific Electronic Assembly
Input Channels	16 differential or 32 single-ended
Input Voltage Ranges	+/-10 V, +/-5 V, +/-2.5 V, +/-1.25 V, 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
Input Current Ranges	0-20 mA, 4-20 mA
Resolution	16-bit
Accuracy	+/-0.05% of full scale
Conversion Speed	Up to 1 ms per channel
Isolation	Channel-to-channel and channel-to-backplane isolation
Communication Ports	2 x RS-232/RS-485, 1 x Ethernet 10/100Base-TX
Communication Protocols	Modbus RTU/ASCII, Modbus TCP/IP, GE Diagnostic Protocol
Power Supply	24 VDC from backplane
Storage Temperature	-40 deg C to +85 deg C
Humidity Range	5%-95% non-condensing
Status Indicators	Power, Fault, Serial Activity, Ethernet Link/Activity LEDs

GE Mark VIe Industrial Control Characteristics

The IS200AEADH1ADA applies GE Mark VIe industrial control architecture for analog acquisition, signal conversion, and controller communication. The board supports I/O density scaling through up to 32 single-ended analog input channels or 16 differential input channels within a compact control assembly.

The module incorporates GE control platform features including deterministic network communication through Ethernet diagnostic interfaces, serial Modbus communication support, and firmware flash compatibility with the installed Mark VIe controller configuration.

The isolated analog input design provides channel separation for field signal processing. Multiple voltage and current ranges allow connection to different sensor output types while maintaining 16-bit conversion resolution.

Frequently Asked Questions

Q: What analog signal types can the IS200AEADH1ADA process?
A: The board supports voltage ranges from +/-10 V to 0-1.25 V and current inputs including 0-20 mA and 4-20 mA.

Q: Which communication interfaces are available on the IS200AEADH1ADA?
A: The board provides two RS-232/RS-485 serial ports and one Ethernet 10/100Base-TX interface.

Q: Is the module isolated between input channels and the backplane?
A: Yes. The available specifications indicate channel-to-channel and channel-to-backplane isolation.

Field Installation Guidelines

Install the IS200AEADH1ADA into the designated GE Mark VIe rack position and verify mechanical alignment before applying system power. Connect communication interfaces through the specified DB9 and RJ45 connectors.

Use shielded cables for analog and communication wiring where required by the cabinet design. Separate low-level analog signal cables from high-current power wiring to reduce electromagnetic interference.

Configure the module through ToolboxST software using Ethernet or serial communication links. Verify LED status indicators and perform communication diagnostics after installation.

Spesifikasi

• Merek: General Electric
• 
  :
  

Keuntungan

• Keandalan tinggi di lingkungan industri
  
  
• Mendukung operasi berkelanjutan
• Kompatibel dengan sistem PLC/DCS utama