GE IS200ACLEH1BAA Application Control Layer Module The GE IS200ACLEH1BAA, also cataloged as the IS200ACLEH1BAA Application Control Layer PCB, operates as a dedicated hardware...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE IS200ACLEH1BAA Application Control Layer Module
The GE IS200ACLEH1BAA, also cataloged as the IS200ACLEH1BAA Application Control Layer PCB, operates as a dedicated hardware component for deterministic turbine sequencing and control processing within the GE Speedtronic Mark VI control platform.
Suffix Breakdown & Model Matrix
The IS200ACLEH1BAA is identified as a fixed Mark VI Application Control Layer module. The provided documentation defines the functional revision and configuration suffix without a separate modular ordering matrix.
Parameter
Specification
Model
IS200ACLEH1BAA
Brand
GE
Origin
United States
Hardware Type
Application Control Layer (ACLE) PCB
System Platform
Speedtronic Mark VI
Processor
Embedded DSP/ARM processor
Memory
Onboard RAM and Flash storage
Communication Interfaces
Ethernet, IONet, Modbus
Isolation
2.5 kV RMS field-to-logic
Weight
Approx. 0.5-0.7 kg
Dimensions
Rack-mount PCB form factor
Operating Temp
-40 deg C to +70 deg C
Power Consumption
Not specified; 28 VDC nominal power input
Environmental Protection
Conformal coating for dust, humidity, and salt fog environments
Hardware Specifications
Parameter
Specification
Model
IS200ACLEH1BAA
Brand
GE
Origin
United States
Functional Role
Application processing, sequencing, and turbine control communication
Input Power
28 VDC nominal
Processor Architecture
Embedded DSP/ARM processing platform
Communication Protocols
Ethernet, IONet, Modbus
Signal Processing
Real-time control execution and data handling
Isolation Voltage
2.5 kV RMS field-to-logic
PCB Construction
Rack-mounted industrial control board
Weight
0.5 kg
Operating Temp
-40 deg C to +70 deg C
Power Consumption
Not specified; nominal 28 VDC supply
Industrial Control Processing and Network Compatibility
The GE Mark VI platform uses distributed control hardware with dedicated communication paths between controller modules, I/O assemblies, and application processing layers. The IS200ACLEH1BAA provides processor-based execution for turbine application logic and communicates through Ethernet, IONet, and Modbus interfaces.
The module supports firmware-based control functions, where flash memory compatibility and application software revision alignment are required during controller configuration. Network timing depends on the Mark VI system architecture, communication configuration, and connected I/O modules.
Frequently Asked Questions
Q: What communication interfaces are available on the IS200ACLEH1BAA? A: The module supports Ethernet, IONet, and Modbus communication interfaces as specified for the Mark VI control platform.
Q: What power input is required for this module? A: The IS200ACLEH1BAA operates from a 28 VDC nominal power input according to the supplied technical data.
Q: Does the module provide electrical isolation? A: The module includes 2.5 kV RMS field-to-logic isolation for separation between external signals and internal control electronics.
Field Installation Guidelines
Install the IS200ACLEH1BAA in the designated Mark VI rack position according to the system hardware configuration documentation.
Verify that the supply voltage wiring is correctly terminated before energizing the module. Communication cables should be routed separately from high-current power conductors to reduce electromagnetic interference.
Use proper grounding practices for rack assemblies and cable shields. Confirm connector seating, backplane engagement, and firmware compatibility before placing the module into service.
