GE DS200TCDAG1A Digital I/O Terminal Board The GE DS200TCDAG1A, also cataloged as the DS200TCDAG1A Digital I/O Terminal Board, operates as a dedicated hardware...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE DS200TCDAG1A Digital I/O Terminal Board
The GE DS200TCDAG1A, also cataloged as the DS200TCDAG1A Digital I/O Terminal Board, operates as a dedicated hardware component for digital field signal termination and conditioning within the GE Mark V SpeedTronic control system network. The board provides electrical interfacing between external digital devices and Mark V control processors through terminal connections, signal isolation, and relay output interfaces.
Hardware Specifications
Parameter
Specification
Model
DS200TCDAG1A
Brand
General Electric (GE)
Origin
United States
Weight
0.3 kg
Operating Temp
0 deg C to +60 deg C (32 deg F to 140 deg F)
Product Type
Digital I/O Terminal Board
System Compatibility
GE Mark V SpeedTronic Control System
Board Type
Digital I/O Terminal / Termination Board
Revision Level
Functional Revision A (G1A)
Input Interface
Optically isolated digital input channels
Output Interface
On-board relay outputs and driver outputs
Terminal Connection
Barrier-style terminal strip blocks with screw connectors
Mounting Method
Cabinet chassis / standoff PCB mounting
Deterministic Digital Signal Interface and Control Bus Integration
The DS200TCDAG1A provides digital signal termination and conditioning functions between field devices and the Mark V SpeedTronic control architecture. The board processes discrete input states through optical isolation circuits to separate field wiring conditions from internal controller electronics.
The terminal board supports relay-driven outputs for external loads including solenoids, contactors, and alarm circuits. Its PCB layout provides defined signal routing between field terminals and the Mark V control processor interfaces.
GE Mark V SpeedTronic systems use distributed control modules with processor channels designated as R, S, and T. The DS200TCDAG1A provides the physical I/O connection layer required for digital device status acquisition and command output execution.
Frequently Asked Questions
Q: What type of signals does the DS200TCDAG1A interface with? A: The DS200TCDAG1A interfaces with discrete digital field signals through optically isolated input channels and relay-based output circuits.
Q: Does the DS200TCDAG1A provide direct processor control functions? A: No. The board functions as a digital I/O termination and interface assembly. Control logic execution is performed by the Mark V SpeedTronic processor modules.
Q: What mounting method is used for this terminal board? A: The DS200TCDAG1A is designed for cabinet chassis installation using PCB standoff mounting arrangements.
Field Installation Guidelines
Install the DS200TCDAG1A inside the designated Mark V control cabinet location according to the system hardware layout.
Verify all field wiring connections at the barrier terminal blocks before energizing the control system. Digital signal wiring should be separated from high-voltage power conductors and routed according to industrial cabinet wiring practices.
Use appropriate grounding methods for cabinet assemblies and maintain proper cable shielding termination where shielded field wiring is applied. Confirm connector seating, terminal screw tightness, and PCB mechanical fixation before system startup.
Avoid installing the board in locations exceeding the specified operating temperature range. Field replacement activities should be performed with system power isolation procedures applied.
