GE DS200SLCCG3AFG LAN Communication Card The GE DS200SLCCG3AFG, also cataloged as the DS200SLCCG3AFG LAN Communication Card, operates as a dedicated hardware component for...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
GE DS200SLCCG3AFG LAN Communication Card
The GE DS200SLCCG3AFG, also cataloged as the DS200SLCCG3AFG LAN Communication Card, operates as a dedicated hardware component for communication interface execution within GE Mark V Speedtronic turbine control system platforms. The board provides LAN and serial communication paths between control modules and external devices, supporting data exchange, diagnostics, and interface signal processing.
Hardware Specifications
Parameter
Specification
Model
DS200SLCCG3AFG
Brand
GE
Origin
United States
Operating Temp
0 deg C to 60 deg C
Power Consumption
Not specified
Product Type
LAN Communication Card
System Compatibility
GE Mark V Speedtronic turbine control system
Communication Interfaces
RS-232, RS-485, LAN interface
Supported Protocols
Modbus, Ethernet/IP depending on firmware configuration
Processor
Embedded microcontroller
Memory
EPROM and RAM for communication logic
Indicators
Diagnostic LEDs for Power, TX, RX, Fault
Mounting Type
Plug-in rack assembly
Operating Voltage
24 VDC
GE Mark V Communication Interface and Network Processing
The DS200SLCCG3AFG is configured for GE Mark V Speedtronic control architectures requiring communication between turbine control boards and external monitoring or control devices. The board manages serial and LAN interface signals, processes communication data through embedded logic, and provides diagnostic indication through onboard status LEDs.
The communication architecture supports industrial control network integration through interface signal conditioning and firmware-defined protocol handling. The board revision G3AFG includes hardware and firmware compatibility updates for Mark V platform operation.
Frequently Asked Questions
Q: What communication interfaces are available on the DS200SLCCG3AFG? A: The board provides RS-232, RS-485, and LAN communication interfaces for connection with compatible GE Mark V control components and external devices.
Q: Is the DS200SLCCG3AFG designed for hot-swapping in a Mark V rack? A: Hot-swap operation is not specified for this board. Installation or replacement should follow GE Mark V rack power isolation and maintenance procedures.
Q: What diagnostic functions are available on this communication card? A: The board provides onboard diagnostic LEDs indicating power status, transmit activity, receive activity, and fault conditions.
Field Installation Guidelines
Install the DS200SLCCG3AFG in the designated GE Mark V rack slot with system power removed before board insertion or removal. Verify connector alignment and ensure the board is fully seated in the rack assembly.
Route LAN and serial communication cables separately from high-voltage power wiring to reduce electromagnetic interference. Use appropriate cable shielding and connect shields according to site grounding practices. Confirm RS-232 and RS-485 polarity before energizing the communication network.
After installation, verify LED status indicators, communication link activity, and firmware compatibility with the existing Mark V control configuration.
