Honeywell CC-PCF901 51405047-175 FTE Control Firewall Module The Honeywell CC-PCF901 51405047-175, also cataloged as the CC-PCF901 FTE Control Firewall Module,...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Honeywell CC-PCF901 51405047-175 FTE Control Firewall Module
The Honeywell CC-PCF901 51405047-175, also cataloged as the CC-PCF901 FTE Control Firewall Module, operates as a dedicated hardware component for Ethernet communication protection and network interface management within Honeywell Experion PKS control system platforms.
Hardware Specifications
Parameter
Specification
Model
CC-PCF901 51405047-175
Brand
Honeywell
Product Type
FTE Control Firewall Module
Origin
USA
Weight
0.3 kg
Dimensions
6 x 15.5 x 14.5 cm
Operating Temp
0 deg C to 50 deg C
Storage Temp
-20 deg C to 70 deg C
Humidity
5-95% RH, non-condensing
Power Supply
Typically 24 VDC
Power Consumption
Not specified
Number of Ports
9
Port Type
RS-485 / RS-232 compatible
Tariff Code
8537101190
DCS Communication Interface and Signal Isolation Characteristics
The CC-PCF901 FTE Control Firewall Module is designed for network interface control within Honeywell process automation architectures. The module provides nine communication ports for controlled data exchange between field control equipment and the FTE network environment.
For Honeywell DCS installations, signal integrity considerations include channel-to-channel isolation, controlled communication paths, and proper grounding of communication shields. The module operates as a physical interface component where network segmentation and controlled access are implemented at the hardware level.
The device is associated with Honeywell Experion PKS communication structures and supports industrial field network applications requiring defined electrical interfaces and stable serial communication connections.
Frequently Asked Questions
Q: What is the primary function of the Honeywell CC-PCF901 module? A: The CC-PCF901 is an FTE Control Firewall Module used to manage communication interfaces and provide controlled network connectivity within Honeywell control system installations.
Q: What power supply is required for the CC-PCF901? A: The module typically operates from a 24 VDC power supply. Specific cabinet power distribution requirements depend on the installed Honeywell system configuration.
Q: Can the CC-PCF901 be installed in any industrial communication network? A: The module is designed for Honeywell control system architectures. Installation should follow the specified Experion PKS hardware configuration and approved network design practices.
Field Installation Guidelines
Install the CC-PCF901 module inside the designated Honeywell control cabinet or approved equipment enclosure.
Verify the 24 VDC supply polarity and grounding before applying power.
Route communication cables separately from high-voltage power wiring to reduce electrical interference.
Connect communication cable shields according to the cabinet grounding design and industrial EMC practices.
Confirm port assignments and network addressing before commissioning.
Avoid exceeding the specified environmental operating conditions during installation and operation.
