Keterangan

Yokogawa NFCP501-W15 S1 Field Control Processor

The Yokogawa NFCP501-W15 S1, also cataloged as the NFCP501 Field Control Processor Module, operates as a dedicated hardware component for executing regulatory and sequence control, logic chart processing, and arithmetic calculations within CENTUM VP Vnet/IP Field Control Stations. It provides deterministic execution of control loops and seamless switchover in a redundant Pair & Spare configuration.

Hardware Specifications

Parameter	Specification
ModelBrand	Yokogawa NFCP501-W15 S1
Origin	Japan
Weight	0.45 kg
Dimensions	Slot-mounted module for FCU baseplate
OperatingTemp	0 to 50 degC (Operating), -20 to 70 degC (Storage)
PowerConsumption	5.5 VDC, 2.0 A to 2.5 A
ModuleType	Field Control Processor (FCP)
NetworkInterface	Dual-redundant 1000Base-T Vnet/IP Ethernet
ProcessorArchitecture	Pair & Spare (Dual CPU redundancy)
ControlFunctionCapacity	Standard control loops, sequence tables, logic charts, SFC blocks
MemoryCapacity	Defined by -W15 suffix (high-capacity control database)
InsulationResistance	≥10 MΩ at 500 VDC
WithstandingVoltage	500 VAC between terminals and ground
Humidity	5 to 95% RH non-condensing

Process Control Technical Features

The NFCP501-W15 S1 supports 4-20 mA HART loop protocol interfaces for analog field devices, ensuring accurate channel-to-channel isolation for dense control loop topologies. The module incorporates cold junction compensation (CJC) for precise temperature measurement and supports deterministic Vnet/IP communications with dual-redundant 1 Gbps links.

Frequently Asked Questions

Q: Does the NFCP501-W15 S1 support hot-swapping while in operation?
A: Yes. The module supports hot-swap maintenance without process interruption, maintaining Pair & Spare synchronization during the replacement procedure.

Q: What is the expected switchover time in case of a CPU discrepancy?
A: The Pair & Spare architecture detects calculation mismatches and performs a seamless switchover to the spare CPU within milliseconds, preventing control loop disruption.

Q: Can firmware be updated without taking the FCS offline?
A: Firmware updates are supported via the control network while the module continues deterministic execution; proper synchronization with the redundant CPU is required.

Field Installation Guidelines

1. Install the NFCP501-W15 S1 into the designated FCU slot, ensuring the module is fully seated and the latching mechanism engages.
2. Maintain separate routing of power and network cables to minimize electromagnetic interference.
3. Connect both redundant Vnet/IP Ethernet links and verify link status LEDs.
4. Ground the module shield to the FCU chassis to ensure proper EMI protection.
5. Avoid placing the module near heat sources; allow adequate airflow within the cabinet for ambient temperature control.
6. Confirm module pairing with the redundant CPU in the system configuration before initiating control operations.

Spesifikasi

• Merek: Yokogawa
• 
  :
  

Keuntungan

• Keandalan tinggi di lingkungan industri
  
  
• Mendukung operasi berkelanjutan
• Kompatibel dengan sistem PLC/DCS utama