Keterangan

Honeywell FC-BSN-1608 Safe Namur Sensor Converter

The Honeywell FC-BSN-1608, also cataloged as the BSN-1608 Safe Namur Sensor Converter, operates as a dedicated hardware component for converting NAMUR sensor input signals within Honeywell safety control I/O backplane systems.

Hardware Specifications

Parameter	Specification
Model	FC-BSN-1608
Brand	Honeywell
Product Type	Safe Namur Sensor Converter
Origin	USA
Dimensions	58.5 x 28.5 x 9 mm (2.3 x 1.125 x 0.35 in)
Power Consumption	None
Approvals	CE, TUV, UL, CSA, FM
Input Channels	16
Input Current Range	0-11 mA
Input Resistance	715 ohm 1%
Absolute Maximum Input Current	25 mA
Cable Capacitance Limit	Less than 16 uF
Earth Resistor Resistance	100 kohm 1%
Maximum Dissipation	0.6 W
Chassis Space Requirement	None; installed on programming connector of I/O backplane
Power Requirement	None

Process Signal Isolation and Loop Interface Characteristics

Honeywell FC-BSN-1608 provides NAMUR sensor signal conversion through a 16-channel analog input structure. Moreover, the module processes low-current sensor signals within the 0-11 mA input range while maintaining defined input resistance characteristics.

The module uses channel-level electrical interfaces for connection between NAMUR field sensors and Honeywell safety I/O architectures. In addition, the 715 ohm input resistance supports controlled signal measurement, while the 25 mA absolute maximum input current specification defines the electrical protection boundary.

For Honeywell process control environments, signal handling concepts align with instrument loop technologies such as 4-20 mA HART loop protocol and channel-to-channel isolation practices. However, the FC-BSN-1608 specification is dedicated to NAMUR sensor conversion and does not define HART communication capability.

Frequently Asked Questions

Q: Does the FC-BSN-1608 require an external power supply?
A: No. The module specification states that no power requirement is required for operation.

Q: How many NAMUR sensor input channels does the FC-BSN-1608 support?
A: The module supports 16 input channels with an input current range of 0-11 mA.

Q: Where is the FC-BSN-1608 installed within the control system?
A: The module occupies no standard chassis space and mounts directly on the programming connector of the I/O backplane.

Field Installation Guidelines

Install the FC-BSN-1608 on the specified Honeywell I/O backplane programming connector and verify mechanical alignment before insertion.

Ensure field sensor wiring follows industrial instrumentation practices, including proper cable routing separation from high-voltage power conductors and appropriate shielding methods where required.

Confirm that connected NAMUR sensor loops remain within the specified input current and cable capacitance limits. Moreover, check grounding connections according to the system cabinet design to maintain proper signal reference conditions.

Verify that the installation environment meets the applicable control system enclosure requirements before system commissioning.

Spesifikasi

• Merek: Honeywell
• 
  :
  

Keuntungan

• Keandalan tinggi di lingkungan industri
  
  
• Mendukung operasi berkelanjutan
• Kompatibel dengan sistem PLC/DCS utama