Honeywell CC-PAIH02 C300 HART Analog Input Module The Honeywell CC-PAIH02, also cataloged as the CC-PAIH02 HART Analog Input Module, operates...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Honeywell CC-PAIH02 C300 HART Analog Input Module
The Honeywell CC-PAIH02, also cataloged as the CC-PAIH02 HART Analog Input Module, operates as a dedicated hardware component for acquisition of 4-20 mA and voltage-based process signals within the Honeywell Experion PKS C300 I/O architecture. The module digitizes up to 16 field input channels while maintaining concurrent HART digital communication over the same loop interface for bidirectional parameter access and diagnostics.
Suffix Breakdown & Model Matrix
The model designation CC-PAIH02 does not contain documented functional suffix segmentation beyond its base catalog identifier. No verified manufacturer-published sub-variant decoding is available for this part number.
Hardware Specifications
Parameter
Specification
Model
CC-PAIH02
Brand
Honeywell
Origin
USA
Weight
0.3kg
Dimensions
Not specified
Operating Temp
0 deg C to 60 deg C
Power Consumption
Approx. 60 W
Module Type
HART Analog Input Module
Channel Count
16 channels
Input Types
4-20 mA, 1-5 V, 0-5 V
Signal Mode
Single-ended / differential configuration support
HART Protocol
Supported on field loops
Honeywell 4-20 mA HART Loop Integration Characteristics
Within the Honeywell Series C I/O system, the CC-PAIH02 operates on a multiplexed analog-digital loop structure where 4-20 mA process current is sampled concurrently with HART FSK modulation signals. The module performs channel-level signal conditioning and digitization prior to backplane transmission toward the C300 controller. Channel-to-channel electrical separation is implemented at the I/O termination assembly level to reduce cross-channel coupling during mixed-signal acquisition. HART communication frames are passed transparently to higher-level asset management layers without interrupting analog conversion cycles.
Frequently Asked Questions (FAQ)
Q: Does the CC-PAIH02 support hot-swap replacement under energized conditions? A: The module is designed for removal and insertion at the Series C I/O level; however, safe replacement requires adherence to system-defined hot-swap procedures to maintain backplane integrity and avoid loop disturbance.
Q: How is HART data handled during continuous analog sampling? A: HART FSK signals are demodulated in parallel with 4-20 mA acquisition, allowing simultaneous analog conversion and digital field device communication without loop interruption.
Q: What is the backplane power dependency of the module? A: The module draws operational power from the Series C backplane supply; load distribution is managed at the I/O chassis level and must remain within controller power budget limits.
Field Installation Guidelines
The CC-PAIH02 shall be installed on a compatible Honeywell Series C I/O termination assembly with verified grounding continuity between chassis earth and field cable shields. Shield termination should be performed at a single-point ground reference to prevent circulating currents across analog input loops. Field wiring for 4-20 mA channels must maintain loop resistance within transmitter compliance limits to ensure proper current regulation. Signal cables carrying HART communication should be routed separately from high-voltage switching conductors to minimize induced noise coupling. All module insertion and removal actions shall follow system-defined maintenance isolation procedures to avoid transient backplane disturbance.
