Keterangan

Bently Nevada 82362-01 3300/20 Dual Thrust Position Monitor Module

The Bently Nevada 82362-01, also cataloged as the 82362-01 Dual Thrust Position Monitor Module, operates as a dedicated hardware component for axial shaft displacement monitoring within the Bently Nevada 3300/03 Machinery Protection System.

Hardware Specifications

Parameter	Specification
Model	82362-01
Brand	Bently Nevada
Origin	USA
Product Type	Dual Thrust Position Monitor Module
Series	3300/20
System Compatibility	Bently Nevada 3300/03 Machinery Protection System
Monitoring Function	Dual-channel axial thrust position measurement
Input Type	Eddy-current proximity probe signal input
Compatible Transducer	3300 XL Proximity Probes and 7200 Series 14 mm HTPS Proximitor systems
Full-Scale Range	+/- 25 mils (25-0-25 mils)
Input Sensitivity	100 mV/mil (3.94 V/mm)
Output Signal	Proportional analog voltage output
Alarm Function	Integral Alert/Danger alarm relays
Channel Isolation	Independent electrical isolation between channels
Power Supply	Supplied through 3300 system rack backplane
Operating Temp	-40 deg C to +85 deg C
Dimensions	Approx. 241 x 24 x 99 mm
Weight	Approx. 0.5 kg
Power Consumption	Supplied by 3300 rack internal power bus

Eddy-Current Probe Scaling and Rotor Dynamics Signal Processing

The 82362-01 module processes displacement signals generated by eddy-current proximity probe systems. The module applies probe scaling characteristics to convert gap variations between the probe tip and rotor surface into proportional electrical displacement values.

The monitoring circuit evaluates axial rotor movement relative to the thrust bearing position. Signal conditioning is configured for thrust position applications, including gap voltage validation and stable measurement behavior within the proximity transducer operating range. The module architecture supports rotor dynamics analysis by providing continuous axial position feedback for machinery protection logic.

Frequently Asked Questions

Q: What type of transducer input is supported by the 82362-01 module?
A: The module accepts eddy-current proximity probe signals from compatible Bently Nevada proximity systems, including 3300 XL and 7200 series Proximitor configurations.

Q: Does the 82362-01 provide independent monitoring channels?
A: Yes. The module contains two independent thrust position monitoring channels with separate signal paths and electrical isolation.

Q: Is the 82362-01 installed as a standalone device?
A: No. The module is installed within the Bently Nevada 3300 rack system and receives operating power through the system backplane.

Field Installation Guidelines

• Install the module only in the designated 3300 system rack slot and verify rack power compatibility before insertion.
• Connect proximity probe wiring using shielded instrumentation cable suitable for low-level displacement signals.
• Maintain separation between probe signal wiring and high-current power cables to reduce electrical interference.
• Ground cable shields according to site instrumentation grounding practices and avoid creating unintended ground loops.
• Verify probe gap voltage and signal polarity before commissioning the thrust position monitoring channel.
• Confirm alarm relay wiring and external shutdown logic connections before placing the protection system into service.
• Follow Bently Nevada 3300 system installation procedures for rack configuration, module addressing, and maintenance access.

Spesifikasi

• Merek: Bently Nevada
• 
  :
  

Keuntungan

• Keandalan tinggi di lingkungan industri
  
  
• Mendukung operasi berkelanjutan
• Kompatibel dengan sistem PLC/DCS utama