Keterangan
Bently Nevada 3500/62-01-00 Dual Channel Velocity/Acceleration Monitor
The Bently Nevada 3500/62-01-00, also cataloged as the 3500/62-01-00 Dual Channel Velocity/Acceleration Monitor, operates as a dedicated hardware component for vibration and acceleration signal processing within the 3500 Machinery Protection System rack architecture. It conditions ±50 V transducer inputs and converts them into proportional monitoring outputs through the rack backplane interface.
Hardware Specifications
| Parameter |
Specification |
| Model |
3500/62-01-00 |
| Brand |
Bently Nevada |
| Origin |
USA |
| Operating Temp |
-30 deg C to +65 deg C |
| Power Consumption |
Supplied by 3500 rack power modules |
| Module Type |
Dual Channel Velocity/Acceleration Monitor |
| Channels |
2 independent channels |
| Input Types |
Velocity transducers, accelerometers |
| Signal Range |
±50 V |
| Outputs |
4-20 mA per channel |
| Alarm Logic |
Alert and Danger setpoints configurable |
| Communication |
3500 rack backplane, System 1 interface |
Eddy-Current and Vibration Signal Processing Behavior
The module applies channel-based signal conditioning for velocity and acceleration conversion. Each channel processes transducer input independently, reducing inter-channel interference under high vibration density conditions. Signal scaling aligns with configured sensitivity parameters for case vibration and shaft acceleration measurement. Output conversion maintains proportional 4-20 mA mapping for downstream control and diagnostic systems.
Channel separation logic implements internal filtering to limit cross-talk between parallel measurement paths in the rack backplane environment.
Frequently Asked Questions (FAQ)
Q: Can the module be hot-swapped during rack operation?
A: Yes. The module supports hot-swap within the 3500 rack when system redundancy and configuration allow continuous operation.
Q: Does each channel operate independently for output generation?
A: Yes. Each channel processes input and generates separate 4-20 mA outputs with independent alarm thresholds.
Q: What happens if one channel fails?
A: The second channel continues operation. Fault indication is provided via module status LEDs and System 1 diagnostics.
Field Installation Guidelines
Install the module in a compatible 3500 Series rack slot according to system slot mapping rules. Ensure the rack power supply is stable before insertion.
Verify that transducer wiring is correctly shielded and grounded at a single-point earth reference. Avoid parallel routing with high-voltage conductors to reduce noise coupling.
After insertion, confirm LED status indicators for channel OK and module status. Validate configuration through System 1 software before enabling alarm logic outputs.
