Bently Nevada 330104-00-04-10-02-00 3300 XL 8 mm Proximity Probe The Bently Nevada 330104-00-04-10-02-00, also cataloged as the 330104 3300 XL...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Bently Nevada 330104-00-04-10-02-00 3300 XL 8 mm Proximity Probe
The Bently Nevada 330104-00-04-10-02-00, also cataloged as the 330104 3300 XL 8 mm Proximity Probe, operates as a dedicated eddy-current sensing component for shaft displacement and vibration measurement within Bently Nevada machinery monitoring systems.
Hardware Specifications
Parameter
Specification
Model
330104-00-04-10-02-00
Brand
Bently Nevada
Product Type
3300 XL 8 mm Proximity Probe
Origin
USA
Weight
0.12 kg
Dimensions
113 x 1.8 x 1.5 cm (shipping size)
Power Consumption
Supplied through compatible proximity transducer system
Thread Type
M10 x 1 thread
Probe Diameter
8 mm
Unthreaded Length Option
0 mm
Overall Case Length Option
40 mm
Total Length Option
1.0 meter (3.3 feet)
Cable Type
Miniature coaxial ClickLoc connector standard cable
Armor Configuration
Armored probe design
Agency Approval
Not required
Tariff Code
8537101190
Shipment Location
Xiamen, China
Eddy-Current Measurement and Rotor Dynamics Features
The 330104-00-04-10-02-00 uses an eddy-current sensing principle to measure shaft position changes without physical contact. Therefore, the probe provides displacement signals for machinery vibration monitoring, axial position measurement, and rotor dynamic analysis.
The probe geometry follows the 3300 XL 8 mm series scaling characteristics. In addition, the system supports gap voltage validation through standard Bently Nevada proximity transducer calibration methods, including the commonly applied -10 VDC target gap reference during installation verification.
The armored construction reduces mechanical damage risks in industrial routing environments. Furthermore, the miniature coaxial ClickLoc connector maintains signal continuity between the probe and extension cable assembly while supporting stable vibration monitoring circuits.
Frequently Asked Questions (FAQ)
Q: What measurement principle does the 330104-00-04-10-02-00 use? A: The probe uses an eddy-current measurement principle to detect shaft displacement by generating a proportional electrical output related to the distance between the probe tip and conductive target surface.
Q: Does the probe require physical contact with the rotating shaft? A: No. The 330104-00-04-10-02-00 operates as a non-contact proximity sensing device and measures shaft motion through electromagnetic field changes.
Q: What installation factor affects proximity probe signal accuracy? A: Probe gap adjustment, target material condition, cable routing, and proper grounding practices affect signal stability and measurement accuracy.
Field Installation Guidelines
Install the 330104-00-04-10-02-00 probe with the sensing tip aligned toward the monitored shaft surface. Maintain correct mechanical clearance according to the approved Bently Nevada installation procedure.
Connect the miniature coaxial ClickLoc connector securely to prevent signal interruption caused by mechanical vibration. Route the probe cable away from high-current power conductors to reduce electromagnetic interference.
Verify the probe gap voltage after installation using the compatible Bently Nevada proximity monitoring equipment. Confirm the output response before placing the machinery protection channel into service.
Use proper shield termination and grounding practices to maintain measurement signal integrity. Avoid sharp cable bends and excessive mechanical stress on the armored section during installation.
