Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Bently Nevada 136483-01 Isolated +4 to +20 mA I/O Module
Configured for isolated current signal interfacing in Bently Nevada 3500 monitoring system platforms, the Bently Nevada 136483-01 (136483-01 Isolated +4 to +20 mA I/O Module) provides direct physical/electrical execution for analog current input and output signal processing.
Hardware Specifications
Parameter
Specification
Model
136483-01
Brand
Bently Nevada
Product Type
Isolated +4 to +20 mA I/O Module with External (Spares)
Origin
USA
Weight
0.44 kg
Dimensions
2.5 x 11 x 24 cm (Estimated Shipping Size)
Operating Temp
Not specified
Power Consumption
Not specified
Signal Interface
Isolated +4 to +20 mA analog I/O
System Compatibility
Bently Nevada 3500 Machinery Protection System
Application Function
Analog current signal interface and isolation module
Eddy-Current Signal Scaling and Machine Monitoring Interface
The 136483-01 module provides isolated +4 to +20 mA signal handling within Bently Nevada machinery monitoring architectures. The module processes current-loop signals while maintaining electrical separation between field wiring and monitoring system electronics.
For machinery condition monitoring applications, Bently Nevada systems use calibrated signal processing methods including eddy-current probe scaling, gap voltage validation, and rotor dynamics evaluation. Proper signal conditioning supports accurate vibration-related measurements and reduces measurement errors caused by electrical interference.
The isolated I/O design supports signal integrity by limiting ground loop effects and reducing cross-talk between connected measurement channels. Field wiring practices should maintain proper shielding and grounding to preserve analog signal accuracy.
Frequently Asked Questions
Q: What signal type does the Bently Nevada 136483-01 module support? A: The module supports isolated +4 to +20 mA analog current signal interfacing for Bently Nevada monitoring system applications.
Q: Is the 136483-01 module used for direct vibration probe connection? A: No. The module is an isolated analog I/O interface component. Direct vibration probe excitation and measurement functions are handled by dedicated Bently Nevada monitoring modules and transducer interfaces.
Q: What installation factors affect signal performance? A: Signal performance depends on correct field wiring, cable shielding, grounding practices, and separation from high-noise electrical circuits.
Field Installation Guidelines
Install the module according to the applicable Bently Nevada 3500 rack configuration requirements.
Verify module seating and connector engagement before system operation.
Use shielded signal cables for +4 to +20 mA field connections where required by the installation environment.
Route analog signal wiring separately from high-voltage power cables and switching circuits.
Confirm grounding practices to minimize electrical noise and signal interference.
Verify current loop polarity and field termination points before commissioning.
