Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Allen-Bradley 1769-OV32T CompactLogix 32-Point DC Output Module
Configured for 24 VDC sinking output signal execution in CompactLogix EtherNet/IP controller platforms, the Allen-Bradley 1769-OV32T (1769-OV32T Output Module) provides direct physical switching control for connected field devices.
Hardware Specifications
Parameter
Specification
Model
1769-OV32T
Brand
Allen-Bradley
Origin
USA
Product Line
CompactLogix
Module Type
Digital Output Module
Output Configuration
Sinking Output
Number of Outputs
32 Points
Output Voltage
24 VDC
Enclosure Type
Open
Series
A and B
Weight
0.50 lbs (0.23 kg)
Wire Type
Copper, 90 deg C
Solid Wire Size
22-14 AWG
Stranded Wire Size
22-16 AWG
UPC
781180609572
EtherNet/IP and CompactLogix I/O Integration
The 1769-OV32T operates as a CompactLogix expansion I/O module that exchanges output data through the controller backplane interface. Therefore, the module supports I/O density scaling within 1769 system configurations by providing 32 discrete sinking output channels in a compact installation footprint.
Additionally, the module connects field wiring through standard terminal connections and controls DC loads according to the configured output state from the CompactLogix processor. The design supports firmware flash compatibility within the compatible CompactLogix hardware environment when matched with the applicable controller and software revision.
Frequently Asked Questions
Q: What output type does the Allen-Bradley 1769-OV32T support? A: The 1769-OV32T provides 32 sinking DC output points designed for 24 VDC field device control applications.
Q: Can the 1769-OV32T operate as an analog output module? A: No. The 1769-OV32T is a discrete digital output module and does not provide analog signal generation.
Q: What wire specifications apply to field connections? A: The module supports copper conductors with solid wire sizes from 22-14 AWG and stranded wire sizes from 22-16 AWG according to the supplied specifications.
Field Installation Guidelines
Install the 1769-OV32T on the CompactLogix 1769 system according to the controller and I/O assembly requirements.
Verify that the power supply capacity matches the total backplane load before adding the module to an existing rack configuration. Keep DC output wiring separated from high-voltage AC conductors to reduce electrical interference.
Use copper conductors with appropriate insulation ratings for the installation environment. Terminate field wiring securely and maintain correct polarity for all 24 VDC output connections.
Ground cable shields at the designated control panel grounding point when shielded wiring is applied. Avoid routing output signal cables near high-current switching devices, motor feeders, or sources of electromagnetic noise.
Confirm module status indicators and controller diagnostics after installation. Validate each output channel through the CompactLogix program before connecting external loads.
