Keterangan

ABB TK852V010 Shielded FTP CAT 5e Cross-Over Cable

Configured for shielded Ethernet cross-over communication in ABB Advant Master process control systems, the ABB TK852V010 (TK852V010 Shielded FTP CAT 5e Cross-Over Cable) provides a prefabricated cable assembly for direct network interconnection. The product ID is 3BSC950342R1. Its specified construction is shielded FTP CAT 5e, with a product net length of 970 mm.

Hardware Specifications

Parameter	Specification
Model	TK852V010
Product ID	3BSC950342R1
Brand	ABB
Product Type	Prefabricated Cable
Cable Type	Shielded FTP CAT 5e Cross-Over
Network Function	Ethernet cross-over interconnection
Cable Length	970 mm
Weight	0.04 kg
Dimensions	970 mm length; height and width not specified
Shielding	FTP, shielded construction
Connector Configuration	Fitted cable assembly; specific connector type not specified
HS Code	854442
Customs Tariff Number	85444290
WEEE Status	Product not in WEEE scope

Industrial Ethernet Cable Characteristics

The TK852V010 uses shielded FTP CAT 5e construction for Ethernet signal transmission. Therefore, the cable should maintain appropriate shielding continuity through the installed communication path.

The cross-over configuration changes the conductor pairing arrangement between cable ends. Consequently, installers should verify the required interface wiring before replacing a straight-through Ethernet cable.

The supplied data identifies the assembly as a prefabricated cable rather than an active network device. It therefore has no specified power consumption, firmware, or configurable communication parameters.

For ABB Advant Master installations, maintain the cable routing and shielding practices specified by the applicable system documentation. Avoid unnecessary parallel routing with high-energy power conductors, and maintain physical separation where the installation environment requires it.

Frequently Asked Questions

Q: Is TK852V010 an active Ethernet communication module?
A: No. TK852V010 is a passive prefabricated Shielded FTP CAT 5e cross-over cable.

Q: What is the specified cable length?
A: The product net depth / length is specified as 970 mm.

Q: Does the supplied data specify an operating temperature range?
A: No. The provided ABB data does not specify an operating temperature range for TK852V010.

Field Installation Guidelines

1. Verify that the required network connection uses a cross-over configuration before installation.
2. Confirm connector compatibility with the connected ABB communication interfaces.
3. Maintain shield continuity according to the applicable ABB installation documentation.
4. Route the cable away from high-voltage and high-current conductors where practical.
5. Avoid excessive mechanical tension, sharp bends, or crushing of the cable jacket.
6. Inspect both cable ends for connector damage before commissioning.
7. Verify Ethernet communication after installation using the applicable system diagnostics.
8. Record the installed cable identification as TK852V010 / 3BSC950342R1 for maintenance documentation.

Spesifikasi

• Merek: ABB
• 
  :
  

Keuntungan

• Keandalan tinggi di lingkungan industri
  
  
• Mendukung operasi berkelanjutan
• Kompatibel dengan sistem PLC/DCS utama