ABB DSQC378B CC-Link Communication Module The ABB DSQC378B (3HNE00421-1), also cataloged as the DSQC378B CC-Link Communication Module, operates as a...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
ABB DSQC378B CC-Link Communication Module
The ABB DSQC378B (3HNE00421-1), also cataloged as the DSQC378B CC-Link Communication Module, operates as a dedicated hardware component for CC-Link data exchange between ABB robot controllers and external automation devices. The module handles communication signals within ABB robot control architectures.
Hardware Specifications
Parameter
Specification
Model
DSQC378B
Brand
ABB
Origin
Sweden
Product Type
CC-Link Communication Module
Part Number
3HNE00421-1
Communication Protocol
CC-Link Version 1.10
Data Transmission Speed
Up to 10 Mbps
Weight
Approx. 0.55 kg
Dimensions
Approx. 15.2 cm x 12.7 cm x 3.6 cm
Operating Temp
-10 deg C to 50 deg C
Power Consumption
5 W
Industrial Network Communication Characteristics
The ABB DSQC378B uses CC-Link Version 1.10 communication technology to exchange digital control data between ABB robot controllers and connected PLC systems. The module supports deterministic field communication by transferring process signals through the controller interface.
Furthermore, ABB industrial control platforms use backplane bus communication methods to coordinate internal module data handling. The DSQC378B integrates into the robot controller cabinet and provides a defined communication channel for factory automation networks.
The module design supports I/O density scaling requirements by allowing ABB robot systems to communicate with external automation equipment without additional signal conversion hardware. Firmware flash compatibility depends on the installed ABB controller generation and supported system software version.
Frequently Asked Questions
Q: What communication protocol does the ABB DSQC378B support? A: The DSQC378B supports CC-Link Version 1.10 communication for data exchange between ABB robot controllers and external automation equipment.
Q: Can the DSQC378B operate as a standalone communication device? A: No. The module functions as an internal ABB robot controller interface and requires installation inside a compatible controller cabinet.
Q: What installation factors should be considered for the DSQC378B? A: Installation requires correct controller slot placement, proper field cable routing, shielded communication wiring, and grounding practices according to ABB installation documentation.
Field Installation Guidelines
Install the DSQC378B inside the designated ABB robot controller cabinet slot.
Verify controller compatibility and firmware support before module integration.
Route CC-Link communication cables separately from high-voltage power cables to reduce electromagnetic interference.
Connect cable shields according to industrial grounding practices.
Inspect connector seating and mechanical fixing points before system power-up.
Confirm communication status through ABB controller diagnostics after installation.
