Bently Nevada 330930-060-00-00 3300 NSv Extension Cable The Bently Nevada 330930-060-00-00, also cataloged as the 330930 Standard Extension Cable, provides...
Baca selengkapnya
Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Bently Nevada 330930-060-00-00 3300 NSv Extension Cable
The Bently Nevada 330930-060-00-00, also cataloged as the 330930 Standard Extension Cable, provides signal transmission between proximity probe assemblies and monitoring instrumentation within the Bently Nevada 3300 NSv transducer system.
Hardware Specifications
Parameter
Specification
Model
330930-060-00-00
Brand
Bently Nevada
Product Type
3300 NSv Extension Cable
Origin
USA
Weight
0.18 kg
Dimensions
20.3 x 22 x 3.5 cm estimated shipping size
Power Consumption
Passive cable component, no external power consumption
Cable Length
6.0 meters (19.7 feet)
Cable Armor Option
Without stainless steel armor
Output Resistance
50 Ohm
Extension Cable Capacitance
69.9 pF/m (21.3 pF/ft) typical
Tariff Code
8537101190
Eddy-Current Signal Transmission Characteristics
The Bently Nevada 330930-060-00-00 extension cable maintains the electrical characteristics required for 3300 NSv proximity measurement circuits. Therefore, the cable length and capacitance values support proper eddy-current probe scaling between the sensor and monitoring module.
The cable provides a controlled impedance path with a 50 Ohm output resistance. In addition, the 69.9 pF/m typical capacitance value supports gap voltage validation and vibration signal transfer for rotor dynamics monitoring applications.
The extension cable operates as a passive component in the proximity transducer loop. Consequently, it does not require firmware configuration, external power input, or communication addressing.
Frequently Asked Questions
Q: What system components connect with the Bently Nevada 330930-060-00-00 cable? A: The cable connects 3300 NSv proximity probes with compatible Bently Nevada monitoring instruments in an eddy-current displacement measurement circuit.
Q: Does the 330930-060-00-00 require external power? A: No. The extension cable is a passive electrical component and receives operating excitation through the connected proximity transducer system.
Q: What installation factors affect signal performance? A: Cable routing, shielding practices, connector protection, and separation from high-noise electrical conductors affect signal integrity.
Field Installation Guidelines
Install the extension cable according to the applicable Bently Nevada 3300 NSv system wiring requirements.
Maintain separation between the probe cable and high-current power conductors to reduce electromagnetic interference.
Verify connector conditions before installation and prevent contamination or mechanical stress on connection points.
Maintain proper cable routing without sharp bends or excessive mechanical tension.
Confirm the connected probe and monitoring module compatibility before system commissioning.
Check signal behavior and gap voltage readings after installation to verify correct transducer loop operation.
