Keterangan
Bently Nevada 3300/45-01-02-03-00 Dual Differential Expansion Monitor
Configured for relative rotor-to-stator axial differential expansion measurement in Bently Nevada 3300 Monitoring System, the Bently Nevada 3300/45-01-02-03-00 (3300/45 Dual Differential Expansion Monitor) provides direct signal conditioning and alarm execution from dual proximity probe inputs. The module processes complementary displacement signals and generates conditioned outputs for monitoring slow thermal growth behavior of rotating machinery assemblies without external computation layers.
Hardware Specifications
| Parameter |
Specification |
| ModelBrand |
Bently Nevada 3300/45-01-02-03-00 |
| Origin |
USA |
| Weight |
1.02 kg |
| Dimensions |
Single-slot Bently Nevada 3300 rack module |
| OperatingTemp |
-30 degC to +65 degC |
| PowerConsumption |
Not specified |
| Input Type |
Dual proximity transducer inputs |
| Output Signals |
4-20 mA, buffered analog outputs |
| Accuracy |
+/-0.5 percent of full scale at 25 degC |
| Frequency Response |
DC to 0.5 Hz |
| Alarm Function |
Independent Alert and Danger setpoints |
Eddy Current Probe Scaling and Rotor Dynamics Interface (Bently Nevada Specific Behavior)
The module interfaces with eddy-current proximity transducer systems by converting gap voltage variations (typically referenced to -10 VDC calibration targets) into proportional displacement channels. Signal conditioning maintains stable scaling for long-span thermal drift measurement while preserving rotor dynamics phase integrity. Cross-talk suppression is implemented through internal channel isolation architecture to prevent electrical interference between dual probe inputs under high electromagnetic noise environments.
Frequently Asked Questions
Q: Can the 3300/45 module directly accept raw probe signals without a Proximitor interface?
A: No. The module requires conditioned signals from compatible Bently Nevada proximity transducer systems with standardized voltage output scaling.
Q: Does channel-to-channel isolation affect differential expansion accuracy?
A: Channel isolation is designed to prevent signal interference while maintaining matched gain paths, ensuring differential measurement consistency across both inputs.
Q: What is the response limitation of the measurement chain?
A: The monitoring bandwidth is DC to 0.5 Hz, optimized for slow thermal movement rather than dynamic vibration analysis.
Field Installation Guidelines
Maintain proper separation between signal wiring and high-power conductors to reduce induced noise on proximity input lines. Shield termination should be grounded at a single point within the 3300 rack backplane to avoid ground loop formation. Ensure compatible probe scaling configuration prior to commissioning, including correct gap voltage calibration alignment. All module insertion must be performed with rack power removed to prevent transient backplane disturbance.
