Dukungan Pengembalian Dana, Layanan 7X24jam, Hubungi kami .
Hubungi kami: +86 135 995 07613
Tersedia pada hari kerja antara pukul 09.00 hingga 18.00
Email kami: sales2@industriaxplc.com
Tersedia 24/7 untuk pertanyaan dan dukungan
Keterangan
Schneider Electric 140NOC77100 Modicon Quantum Ethernet/IP Network Module
Configured for deterministic industrial Ethernet/IP communication in Modicon Quantum automation platform,the Schneider Electric 140NOC77100 (140NOC77100 Ethernet/IP network module) provides direct physical/electrical execution for CIP explicit messaging and I/O cyclic data exchange across Quantum backplane architecture.
The module operates as a dual-port RJ45 10/100 Mbit/s communication interface integrating Ethernet/IP stack services including SNMP agent, DHCP/BootP server capability, and multicast implicit messaging handling up to 128 connections. It is powered directly from rack backplane supply and implements status diagnostics via multi-LED front panel indication.
Suffix Breakdown & Model Matrix
140 NOC 771 00 is a fixed-order Quantum Ethernet/IP communication module identifier. No documented functional suffix segmentation is defined by manufacturer for feature branching within this code.
The module interfaces with Quantum backplane bus where Ethernet/IP cyclic traffic scheduling is synchronized with CPU scan execution. Firmware-level stack handling supports deterministic implicit messaging while explicit CIP commands are processed via asynchronous buffer queues. Backplane power and data coupling ensures module registration during rack initialization sequence without external addressing dependency. Ethernet frame handling is optimized for industrial real-time segmentation and collision monitoring via duplex state indication.
Frequently Asked Questions
Q: Does the module support hot swap replacement during rack operation? A: Hot swap capability depends on Quantum rack configuration; electrical backplane disconnection may interrupt active CIP connections and requires controller-supported module reintegration.
Q: What is the maximum backplane load impact of the module? A: The module draws 500 mA at 5 V DC from rack supply; total backplane loading must remain within Quantum chassis power budget.
Q: Can firmware be updated via Ethernet interface? A: Firmware upgrade is supported through Schneider Quantum configuration tools via Ethernet/IP service channels depending on CPU firmware compatibility.
Field Installation Guidelines
Ensure rack power is isolated before module insertion into Quantum backplane slot. Maintain RJ45 cabling separation from high-voltage conductors to minimize EMI coupling on 10/100 BASE-TX lines. Use shielded twisted pair cables with proper grounding at cabinet entry point. Verify link and network status LEDs during initialization sequence. Avoid bending radius violations on Ethernet cables below standard industrial minimum. Confirm IP addressing consistency when DHCP/BootP services are enabled to prevent network duplication conflicts.
