Keterangan

Bently Nevada 109549-01 3300 XL NSV Photoelectric Probe

Configured for photoelectric displacement sensing in 3300 XL NSV system, the Bently Nevada 109549-01 (109549-01 Photoelectric Probe) provides direct physical/electrical execution for non-contact position and vibration-related optical signal conversion within 3300 XL NSV measurement chains.

Hardware Specifications

Parameter	Specification
Model	109549-01
Brand	Bently Nevada
Origin	USA
Weight	0.38 kg
Dimensions	32.3 x 6.2 x 26 cm (shipping envelope)
Operating Temp	-35 deg C to +125 deg C (probe tip standard); up to 150 deg C / 175 deg C optional
Power Consumption	Passive device (no excitation power required)
Sensitivity	200 mV/mil (7.87 mV/um) ± 10%
Frequency Response	0.5 Hz to 12 kHz (± 3 dB)
Humidity	100% RH non-condensing
Signal Type	Photoelectric displacement conversion output
Cable Length	1 m

Bently Nevada Eddy-Current Scaling and Signal Integrity Behavior

In Bently Nevada 3300 XL NSV architectures, optical-to-electrical conversion characteristics are mapped against calibrated displacement scaling functions comparable to eddy-current probe transfer curves. The system maintains stable linearization across gap variation profiles, with reference alignment typically validated against -10 VDC normalized gap voltage targets in diagnostic calibration routines.

Rotor dynamics influence introduces phase shift sensitivity in the probe output, requiring strict control of mechanical runout and target surface reflectivity. Cross-talk suppression is implemented at the system interface level to prevent channel coupling in multi-probe arrays, particularly under high vibration spectral density conditions above 10 kHz.

Frequently Asked Questions (FAQ)

Q: Is the 109549-01 probe compatible with hot-swap operation in 3300 XL NSV systems?
A: No. The probe is a passive sensing element and requires system power-down or safe isolation before mechanical replacement to avoid signal discontinuity.

Q: Does the probe require external excitation voltage or loop power?
A: No external loop power is required. Signal generation is achieved through internal photoelectric conversion within the sensing head and reflected signal processing.

Q: What is the effect of cable extension on signal frequency response?
A: Excessive extension beyond specified 1 m length may introduce attenuation and phase distortion, particularly above mid-band frequencies approaching 12 kHz.

Field Installation Guidelines

Probe installation shall maintain rigid alignment with the target surface to preserve linear displacement conversion characteristics. The sensing face must remain free of oil film, dust accumulation, and reflective contamination that can distort optical return signal intensity.

Cable routing shall avoid parallel runs with high-current conductors to minimize induced noise coupling. Minimum bend radius must be maintained to prevent internal fiber stress and signal degradation.

Mechanical mounting torque should follow standard industrial instrumentation practices to ensure repeatable positioning without inducing housing stress or drift in calibration baseline.

Spesifikasi

• Merek: Bently Nevada
• 
  :
  

Keuntungan

• Keandalan tinggi di lingkungan industri
  
  
• Mendukung operasi berkelanjutan
• Kompatibel dengan sistem PLC/DCS utama